APV centrifugal pumps

Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW

... with pump casing and lanter bracket in cast iron. B-NM, B-NMD: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). Applications - For clean ...

The TOP-FLO® TF-C100 centrifugal pump is ideal for use in small and medium size process applications in the dairy, food, beverage, pharmaceutical and other sanitary process industries.

Flow: 82, 36, 14 us gal/min
Head: 0'00" ft - 240'00"

... suction lift limitations in deep manholes or excavations over 25 feet deep, the Hydraulic Submersible pump handles up to 4.25 inch solids and pumps efficiently at heads up to 240 feet. Available with ...

Flow: 500 m³/h - 220,000 m³/h

BOGP high pressure Centrifugal pump is designed for the process which requested for low flow rate but high transfer head (pressure). Applications BOGP centrifugal pump ...

Mega Mobile Pump Genuine Mega Design for Mobile Pumps (MMP) The MMP is the best solution to rapidly fill water distribution equipment from ponds, ditches, or other sources of water in remote areas ...

Flow: 1, 1.5, 2.5, 3.5, 4.5 m³/h
Pressure: 40 bar
Power: 4 kW

Side Channel Multistage Pump The DB-65 multistage pump, centrifugal and side channel, is designed with 6 stages, having a horizontal configuration, Shaft sealing by mechanical seal ...

Flow: 500 m³/h
Pressure: 16 bar
Head: 140 m

RD pumps Simple and modular construction ISO 2858-5199 norms. Discharge sizes from DN 32 to DN 125. High hydraulic efficiencies and low NPSH value (investment casting impellers). Heavy duty shaft and bearings. Only 3 ...

Flow: 0 us gal/min - 6,600 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 300'00"

TYPE MC Horizontal single-stage centrifugal pump in back pullout design. Pumping of abrasive and corrosive liquids All components which are in contact with the liquid are made of SICcast Suction ...

Sample Pro Low Flow Pneumatic Groundwater Sampling Pump The Sample Pro portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use ...

Flow: 7 l/min
Pressure: 30 psi

The B-Series Dia-Vac® pump is the smallest pump offered by ADI providing exceptional quality, reliability and affordability. Available with general purpose shaded pole or brush/ brushless DC motor options. ...

Flow: 0 m³/h - 75 m³/h
Head: 0 m - 48 m

Dewatering, mud, marine, effluent, hôtel, loading & transfer of oils, spirits, swimming pools, gas oils, engine cooling. Vessels, industrial pumping petroleum products, chemical Civil constructiondewatering foundations, trenches and pits. Filter ...

Flow: 6,500 l/min
Head: 70 m
Power: 0 kW - 60 kW

ELBA – THE PERFECT COMBINATION The ELBA pump series consists is made up by combining a gearbox and a centrifugal pump. The ELBA group is utilized for farm lands irrigation, sewage spreading ...

Hypro centrifugal pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids: water, insecticides, herbicides, wettable powders, emulsives, liquid fertilizers, etc. ...

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used ...

Flow: 0 m³/h - 3,500 m³/h
Head: 0 m - 105 m

... priming centrifugal pump that is suitable in applications such as clean water, seawater, brines and alkaline liquids in water supply, dust extracting and spray-coating plants, etc, in thermal range of ...

Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...

Flow: 3,000 m³/h

The EN 733 MU Series of End-Suction Centrifugal Pump, manufactured by Pompe Garbarino S.p.A., is specifically designed for fresh and sea water, condensate, oils, chemical and petrochemical products. It ...

Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"

Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...

Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m

PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...

Flow: 2.5 m³/h - 100 m³/h
Head: 80 m
Power: 750 W - 45,000 W

... SOLID MECHANICAL EQUIPMENT CO.,LTD provides good quality fluorine plastic lined centrifugal chemical pump. IHF single stage end suction fluorine plastic lining centrifugal pump ...

Flow: 50 l/min
Head: 60 m

Flow: 0 l/min - 1,000 l/min
Pressure: 0 Pa - 276,000 Pa
Power: 750 W - 5,000 W

Characteristics Compact structure, easy installation and maintenance, low noise, smooth operation, long service life. Built-in check valve, switching valve, safety valve(relief valve) and vacuum valve. ...

Flow: 1,260 m³/h - 2,772 m³/h
Head: 13 m - 63 m
Power: 0 kW - 560 kW

The EHM Series consists of slurry pumps. These pumps can be employed in mining, coal, metallurgical and construction material fields applications. They are well suited for handling minimized corrosive ...

Flow: 24,800 l/h
Head: 10 m
Power: 0.5 ch

• Magnetic drive pump made of plastic material • Closed or open impeller pump in AISI304 or AISI316 • Connectors in PP, PVC, PVDF • Pumps with membrane in plastic material or steel