APV centrifugal pumps

Flow: 130 l/min
Pressure: 0.3 bar

... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing ...

Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW

The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...

Flow: 3.17, 5.07 l/min
Pressure: 4,150, 3,800 bar
Power: 30, 50 ch

The HyPlex@ Prime pump represents the next generation of energy efficient, direct drive ultrahigh-pressure waterjet pumps. The HyPlex's direct drive delivers superior ratio of input energy to the waterjet. Next ...

Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW

... inlet to the pump, which ensures hassle-free operations under conditions in which many other pumps have problems with clogging. A submersible pump with a unique design Due to the ...

Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW

... petrochemical products. The pumps of our manufacture present an advanced model of the pump NTsI-F-100 (НЦИ-Ф-100) previously produced in the post-Soviet countries. This is a centrifugal ...

Flow: 45 m³/h - 320 m³/h
Head: 25 m - 35 m
Power: 11 kW - 75 kW

Centrifugal pump for drilling mud system,oilfield and HDD drilling fluids centrifugal pump China manufacturer.GN supply centrifugal pump ...

... cps. The pumps are ruggedly constructed with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action Drum Pump is supplied with the appropriate adapters for quick and easy installation. EZI-action ...

Flow: 1, 1.5 l/min
Pressure: 100 bar

... looking for a safe and professionalhigh-pressure pump sales service, MIXTRON is the right choice for you. What's the secret to our success? A unique design and top-tier components. The pump is made of ...

Flow: 0.25 m³/h - 1,300 m³/h
Head: 3 m - 230 m
Fluid temperature: -100 °C - 350 °C

Stainless Steel Magnetic Drive Chemical Process Pump Discover here the advantages of the MKP from CP – The highly reliable centrifugal pump for various applications. Overview Special ...

Flow: 5 us gal/min - 83 us gal/min
Power: 1.5, 1, 0.33 ch

... Hayward C Series of Centrifugal Pump serves as a solution for different water service applications. It is empowered by a fully enclosed 56C frame motor constructed for an uninterrupted chemical operations. ...

Flow: 300, 450, 502 l/min
Head: 7, 10 m
Power: 0.55, 0.75, 1.1 kW

Ex submersion pump conveyor height 10 metres For use in biogas areas and other potentially explosive areas of Ex zones 1 and 2 • Housing and impeller of cast iron • Slip-ring seal of silicon carbide • Drive shaft ...

Flow: 0 m³/h - 300 m³/h
Pressure: 16 bar
Head: 150 m

Sealless magnetic drive chemical process pump. Connecting dimensions acc to ISO 5199 Wide selection of MOC´s. Precision casted casing and impeller Hastelloy C4 can material with minimal eddy currents, one piece deep ...

Flow: 0 m³/h - 100 m³/h
Pressure: 16, 24, 40 bar
Head: 80 m

Type KMB is a volute casing pump with housing dimensions according to ISO 2858 and simple magnetic coupling. The size selection is limited. The pump has a permanent magnet coupling, and the containment ...

Flow: 0 l/h - 1,800 l/h
Pressure: 15 bar
Power: 1.5 kW

- Pump body in 316L stainless steel - Rotor and scraper in food industry grade plastic - Mechanical seal in widia - Inlet/outlet diameter: 50 mm - Minimum speed of rotation speed: 40 rpm - Calculated capacity per ...

Flow: 4.8 m³/h - 42 m³/h
Power: 0.37 kW - 4 kW

Vertical pumps are used in chemical transfer. Mainly used when the liquid needed to be pumped below the pump level. Vertical structure makes it possible to work in the liquid and suction can be made ...

Flow: 160 l/min
Pressure: 4 bar
Power: 0.75 kW

Electric, centrifugal pump for the transfer of clean water. Pump body and rotor in stainless steel AISI 304.

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...

Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW

... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...

Power: 1.13 ch - 3 ch

... multiple power sources and a wide variety of sizes to ensure we equip you with the right pump for your application. All TorqLite expertly designed pumps are highly durable and deliver… Adjustable ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO ...

Flow: 0 m³/h - 45 m³/h
Power: 0.12 kW - 7.5 kW

Mag drive centrifugal pumps series MG PP/PVDF are made of thermoplastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. Thanks to the innovative ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

The Horizontal Centrifugal Pumps of the CP range are highly reliable pumps with very high performance. They can work in very harsh conditions and constant over time. The sturdiness of ...

Flow: 10 l/h
Head: 10 m
Power: 10 kW

... thin ceiling-mounted units. The pump operates electromagnetically and is very quiet, with good delivery performance against pressure. It is suitable for small air conditioning units. Description The ...

Flow: 50 us gal/min - 750 us gal/min
Pressure: 3.4 bar - 15.4 bar

... Each pump set is tested in our factory, prior to dispatch, as per UL, FM and NFPA standards. These pumps are covered by a warranty of one-year subject to standard terms and conditions. NAFFCO also ...

Flow: 0.9 m³/h - 420 m³/h
Head: 0 m - 642 m

... incorporation of the pump unit is simplifi ed by the linear position of stub pipes in the hermetic jacket space requirement is minimized due to compact design standardized design of the connections ...