Flow: 130 l/min
Pressure: 0.3 bar
... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing ...
HANNING
Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW
The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...
M-TEC Mathis Technik
Flow: 3.17, 5.07 l/min
Pressure: 4,150, 3,800 bar
Power: 30, 50 ch
The HyPlex@ Prime pump represents the next generation of energy efficient, direct drive ultrahigh-pressure waterjet pumps. The HyPlex's direct drive delivers superior ratio of input energy to the waterjet. Next ...
Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply options including: Small ...
CoolMist Systems Australia
Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW
... compared with conventional models) • Long Life Increased 10% with newly developed vane blade material. (compared with conventional models) Operation not allowed at ultimate vacuum.For model selection ...
Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW
... slurry and affects the pumps by increasing wear and tear. Landia has developed special materials to extend the pump's lifespan significantly in comparison with a standard pump. Landia's ...
LANDIA AS
Flow: 0.2 l/min
Pressure: 500 bar
Name：Supercritical Fluid Preparative scale CO2 extraction Equipment No：SE-600-10000C Info： Application Focuses 1. Chemistry labs 2. Research institutes 3. Chemical/ Food factories 4. Sample extraction Features 1. Easy operation 2. Space ...
Flow: 160 l/min
Flow: 1.3 l/min - 450 l/min
Pressure: 35 bar - 120 bar
... Description PH pumps are robust, reliable piston grouting pumps, offering the possibility of computer piloting. PH pump range is very large and allows covering the complete grouting ...
Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW
... petrochemical products. The pumps of our manufacture present an advanced model of the pump NTsI-F-100 (НЦИ-Ф-100) previously produced in the post-Soviet countries. This is a centrifugal semi-submersible ...
Epos PJSC
V Series High Pressure Pump System - Internationally Applicable 1. Siemens three-phase asynchronous motor and Rexroth constant pressure plunger pump are combined to serve as the power unit of the system, ...
DARDI INTERNATIONAL CORPORATION
Flow: 10 m³/h - 90 m³/h
Pressure: 300,000 Pa
Power: 4 kW - 22 kW
GNG Series Centrifuge feed pump is a positive displacement pump, also called screw pump. The GNG positive displacement pump is an ideal pump for feeding ...
GN Solids Control
... cps. The pumps are ruggedly constructed with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action Drum Pump is supplied with the appropriate adapters for quick and easy installation. EZI-action ...
Trico
High-reliability Water Pump Developed from the Engine System Requirements The material of mechanical seals having a large role to play in preventing cooling water leakage changed to silicon carbide (SiC) from alumina. ...
AISIN
The grouting pump P101PE is suitable for compensation grouting through pipes fitted with valves, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing ...
MODELCO
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
... also used in the transfer of recycled powder enamel with a recycling system. Please contact us for Strong3000 enamel transfer pump spare parts.
Flow: 8 m³/h
Head: 25 m
Power: 1.1 kW
Displacement : 35.8cc Lift Head : 25m Delivery Volume : 8m³/h SPECIFICATIONS Model : WP350 Engine Type : Honda GX35 Type, 4-stroke Displacement : 35.8cc Power Output : 1.1kw Carburetor : Diaphragm Lift Head : 25m Suction ...
Taizhou Boyou Garden Machinery Co., Ltd.
Pressure: 1.7 bar - 3 bar
Length: 85, 132 mm
Width: 72, 99 mm
Volumetric manual pump; each activation tallies with the pre-set quantity of lubricant. The lubricant is delivered by a plunger piston driven by a mechanical spring, suitably sized and preloaded. Tank ...
Azeta Zeo Asioli
... of complete Airless Pumps as detailed below along with all the spare parts and consumables from its UAE and India factories that is fully supported around the world by our distribution and technical support network. Airless ...
Flow: 8 l/min - 180 l/min
Pressure: 2 MPa - 25 MPa
1. Combinning special internal designs and strict engineering disciplines has reduced noise level to new lows in whole pressure zone. 2. Depending on variety of application needs, multiple optional unique control methods are available. ...
Pressure: 300 bar
Hydraulic Gear Pump – B3 Series | 38 – 125cc/Rot • - Medium Size • - Fast to Mount • - Bidirectional • - Rear and Side Inlet/Outlet Bidrectional Hydraulic Gear Pump – B3 series First of all it’s ...
ABER HYDRAULICS
Flow: 0 m³/h - 1,000 m³/h
Pressure: 0 bar - 350 bar
... -diaphragm pumps allow for reliable and low-wear handling of abrasive, aggressive and challenging media. Thanks to the linear flow path through the hose-diaphragm and the valves, the conveyed fluid will neither come in ...
Flow: 0.1 m³/h - 30 m³/h
Power: 5 W
Length: 85 mm
Peristaltic pump with fixed flow configurable from 0.1 l/h to 30 l/h, ignition through external system, power supply 24 Vdc or 230 VAC.
Please specify:
Help us improve:
remaining