Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Zaklady Automatyki POLNA S.A.
Flow: 5, 10.5 l/min
Power: 0.06 kW
- Working Pressure: 1 - 5 Kg/cm - Max. painting pressure: 5 Kg/cm - Max. pump speed: 160 times/min. - Air consumption: 11.5 CFM - Free speed: (1:1) 5 200 RPM - Agitation shaft: 8 mm - Proppeler: 60 mm -Diameter of ring: 318 mm
Pro-Tek
... 1 pneumatic pump is a single-acting pump suitable for all types of applications. The maximum amount of grease supplied during every pumping cycle is 30 cm³ (an amount that is approximately sufficient ...
Flow: 0 us gal/min - 20 us gal/min
Alemite Stationary RAM Pumps deliver fast, quiet and efficient operation, and are rugged enough to handle challenging oil applications. RAM pumps are durable, and can operate at rates up to 20 gallons ...
Alemite
A wide range of piston and diaphragm pumps are available for use with fluids from water consistencies up to pastes. Materials include: - Adhesives - Epoxies - Lubricants - Mastics - Silicones - ...
Flow: 120 l/min
The Alternating current (AC) electric pumps is equipped with by-pass valve and stainless steel filter, self-priming; pump frame is in cast iron, rotor in sintered steel. Volumetric self-priming rotary ...
numak srl
The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance which well meet the lifting ...
Flow: 56 l/min
Power: 220 W
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...
Eurial
Flow: 45 l/min - 90 l/min
Pressure: 0.06, 0.3 MPa
Power: 0.75 kW
The BT90 pump is applicable to gasoline, kerosene, diesel and some compatible fuel. Its inside construction includes Air Separator, Check Valve, By-pass Valve, Float Valve, Overflow Prevention Valve, Inlet and Outlet ...
Flow: 38 l/min
Power: 250 W
Length: 132 mm
Electric centrifugal pump with high-quality, impact-resistant plastic housing. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), GTL, HVO and R33 Self-priming with integrated siphon protection Foot ...
HORN GmbH & Co. KG TECALEMIT
Flow: 1, 1.5, 2.5, 3.5, 4.5 m³/h
Pressure: 40 bar
Power: 4 kW
Side Channel Multistage Pump The DB-65 multistage pump, centrifugal and side channel, is designed with 6 stages, having a horizontal configuration, Shaft sealing by mechanical seal without cooling, ...
Wenzhou BlueSky Energy Technology Co., Ltd.
Flow: 4 l/min - 40 l/min
Pressure: 10 bar - 70 bar
Width: 126 mm
Variable Displacement Vane Pump With Gerotor, Cooling Gerotor Variable Displacement Vane Pump with Cooling circulation pump is CML Unique and patented design. First, improve machining ...
Camel Precision Co., Ltd.
Flow: 1 l/min
Input diameter: 4 mm
Weight: 2 kg
... water resistant. The pump can deliver a pump pressure of 3 bar, which makes it suitable for use with in-line filters, and an underpressure maximum of 1 bar. It is a self-priming pump. ...
Power: 0 kW - 55 kW
Hydraulic pump motor unit - for applications where the system requires hydraulic flow. The AC Hydraulic motor pumps are made up of an AC Motor driving a Hydraulic gear pump assembly. AC ...
Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"
... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline.
Hydra-Tech Pumps
The Bigas Alsina, S.A. blood pumps, are designed to allow the transport of this waste material in an efficient way, avoiding all those problems that ussualy arise inside the pumps, due in most cases because ...
Pressure: 2,000 bar - 7,000 bar
Power: 7.5 kW - 55 kW
... products As the only manufacturer of ultra high pressure amplifiers in France, HYDROPROCESS® offers a wide range of high-pressure pump from 2000 to 7000 bar and from 7.5 kW to 55 kW. Our ultra high pressure amplifiers ...
Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW
... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump ...
PCM
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
InoxMIMGrup S.L.
Flow: 130 l/min
Pressure: 0.3 bar
... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing ...
HANNING
Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW
The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...
M-TEC Mathis Technik
Flow: 3.17, 5.07 l/min
Pressure: 4,150, 3,800 bar
Power: 30, 50 ch
The HyPlex@ Prime pump represents the next generation of energy efficient, direct drive ultrahigh-pressure waterjet pumps. The HyPlex's direct drive delivers superior ratio of input energy to the waterjet. Next ...
Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply options including: Small ...
CoolMist Systems Australia
Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW
... compared with conventional models) • Long Life Increased 10% with newly developed vane blade material. (compared with conventional models) Operation not allowed at ultimate vacuum.For model selection ...
Flow: 20 m³/h - 40 m³/h
Pressure: 0 MPa
Power: 4,000 W
◆ The water powder mixing pump is sufficiently blended with a high-speed rotating impeller to deliver the desired mixture. ◆ Uses: Suitable for milk powder, whey powder, paste powder, etc., etc., and liquids are mixed ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
Please specify:
Help us improve:
remaining