Baldor electric motors

Power: 0.09 kW - 7.5 kW
Rotational speed: 1,000 rpm - 25,000 rpm

... versions, special armature and end shields, external fan, brake, position transducer, protective cover and more Door and gate drive Wind loads, rainfall, extreme temperatures - not a problem for the hamotic compact ...

Power: 0.12 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm

... single-phase motors have lower starting torque and are less efficient compared to three-phase motors. Asynchronous motor single phase, operating on a single-phase power ...

... speeds. Stable speed with any load Synchronous motors from KESSLER achieve efficiency of up to 98 percent. They are currently the most efficient energy converters on the market. Our synchronous motors ...

Power: 150, 235, 312 W
Intensity: 7.4, 8.7, 4.9 A
Torque: 2.2, 2.8, 3.5 Nm

The new high-torque BLDC motors from ELRA have a significantly higher torque compared to standard motors of this size. The high-pole rotor design with a nominal speed of 750 rpm makes these motors ...

Power: 0.09 kW - 1.5 kW
Intensity: 0.3 A - 3.25 A
Torque: 0.43 Nm - 11.1 Nm

... manufactures self-braking motors in stainless steel: guarantee of precision, stopping speed and maximum safety in the event of a power failure or accidental interruption of the motor ...

Power: 60 W - 335,000 W
Rotational speed: 750 rpm - 3,000 rpm

Power: 0.063 ch - 1 ch
Rotational speed: 770 rpm - 1,380 rpm

... , using a power supply of 110V, 120V, 230V, 240V, 240/420V, or 230/400V. The unit also offers a speed of 770 RPM to 1680 RPM, and a service factor of between 1,00 and 1,40. The Mf-Flex motor is a TEAO ...

Power: 5.5 kW
Intensity: 11.8 A
Rotational speed: 973 rpm

... F with class B temperature rise • Mounting: B3 - Available B5, B14, B34, B35, V1 on request • Fan: Bi-directional fan • Drive Suitability: Suitable for DOL and VFD • Thermistors: PTC included as standard for VFD applications • ...

Power: 0.4 kW - 19 kW
Torque: 3 Nm - 293 Nm
Rotational speed: 4,500 rpm - 6,000 rpm

After more than ten years of experience, PMAC motors are now in their third generation; they stand out thanks to their excellent power-weight ratio and their very high levels of efficiency, while maintaining the unwavering ...

Rotational speed: 350 rpm
Diameter: 37 mm

... .4kgf.cm Rated speed: 350+/-10%rpm Rated current: 0.8A Max Gear ratio: 10:1 RoHS compliance Appliation: Hand Free Electronic Paper Towel Dispenser

Power: 94.07 W
Intensity: 4.2 A
Torque: 3 Nm

This NEMA motor satisfies any requirement. As a cloosed-loop stepper motor with 2 phases, it turns 1.8° per step and ensures steady movement and an optimum holding torque of 3 Nm. The feedback loop allows ...

Power: 45 W - 1,500 W

A range of direct-current motors with power, reliability and durability features. Using only top-quality materials, PENTA is ideal for variable-speed handling applications. Available with a wide range of windings, as ...

Power: 10 W - 700 W
Rotational speed: 5,000 rpm
Diameter: 40 mm - 63 mm

APPLICATION - Industrial use DESCRIPTION - Ferrite magnets - According to IEC standards - Construction type B3, B14 or B5 - Insulation Class F - Heating Class F - Option: Tachymetric dynamo - Option : Encoder - Option: Brake

Power: 0.06 kW - 22 kW
Rotational speed: 3,000, 1,500, 1,000 rpm

... Induction Motors (ABB Models) Power: 0.06 kW~22 kW Poles: 2P, 4P, 6P Frequency: 50Hz/60Hz Protection Class: IP54, IP55, IP56 Insulation Class: F Bearing: C&U, NSK, SKF AOKMAN® Y2 series ...

Power: 30 W - 280 W
Torque: 0.2 Nm - 2 Nm
Rotational speed: 3,000, 2,500, 1,000, 1,500 rpm

... forms and dimensions; - Waterproof or open motors with different degrees of protection; - EMI suppression filters (standard in many motors); - Position, speed and shifting sensors such as encoders, can ...

Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm

... hour. Fitting with blowers, the motor can be widely used for ventilation in tunnel projects,hotels, mansions, other constructionsm where ventilation is needed. D1CS series electric motor ...

Power: 11.19 W - 37.38 W
Torque: 0.0155 Nm - 0.025 Nm
Rotational speed: 8,000 rpm - 16,500 rpm

Output shaft of stainless steel. Sintered self-lubricating sleeve Anchor flange: Polyamide 6 with fiberglass Dimension "A": 42 mm - 49 mm Dimension "L": 31 mm - 38 mm

Power: 1 W - 1,000 W

customed dc micro motor brushless or brushed Dia. 22mm upto 110mm voltage:12v, 24v, 36v, 48v power: 1w upto 1000w  High torque brushed dc motor DUNKER motor ...

Power: 0 kW - 13 kW
Intensity: 0 A - 300 A
Torque: 0 Nm - 21 Nm

D70L165 motors are designed for high performance gearless use, and are ideal for underwater thruster applications where rapid acceleration and high speed are called for. Protection Level: IP68 Electric ...

Power: 71.8 W - 442.8 W
Intensity: 2.67 A - 14.48 A
Rotational speed: 8,842 rpm - 17,500 rpm

Applications Personal care Home Appliances Power tool Business Equipment Motor Port Voltage ( V ): 18～36 Speed ( Rpm ): 4000～30000 Insulation: Class F Motor Driver inside

Wide selection and high quality We offer a wide-ranging portfolio of high-quality DC motors manufactured in Europe by Bühler. If you’re looking for the right Bühler motor for your ...

... GMN high-speed electric motors that were developed and manufactured in the Electric Drives division, excel in terms of precision, balancing quality, smoothness of operation and robustness. ...

Power: 0.06 kW - 37 kW
Rotational speed: 3,000, 1,500, 1,000, 750 rpm

Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable ...

... warranty. FEATURES & BENEFITS SUPER G INTEGRATED VIBRATORY MOTORS Zero maintenance Powerful, quiet, dual vibratory motors apply high G performance Super G vibratory motors are ...

Power: 0.75 ch - 1.1 ch

... System Motors are used with the the Drum Pump Filtration System tube assembly. The system provides filtration and transfer of fluids from 55 gallon drums or similar type of containers. The Drum Pump Filtration System ...