Pressure: 30, 8 bar
Temperature: 15 °C - 40 °C
... MulitValve™ multi-directional valve is particularly suited for liquid handling applications. The control system is compatible with SyrDos™ syringe pumps. The robust stainless steel housing makes the multi-directional ...
Pressure: 0 bar - 16 bar
Super Trap auto drain zero air loss condensate drain energy saving auto drain auto drain for compressor, air tank and air dryer auto drain for compressed air system high pressure auto drain 45bar condensate drain auto drain with odometer counter ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 2 mm - 8 mm
Pressure: 1,400 bar
Temperature: -20 °C - 80 °C
... avoid contamination. Specific selection of metallic materials to avoid hydrogen embrittlement. Special hard treatments for Valve stem Leakage test on seat and packing with nitrogen at maximum operating pressure.
... powder, granules and fibrous materials from cyclones, filters, hoppers etc., whilst maintaining an effective gas seal. The valve consists of two flaps connected by counterweights or spring loaded spindles, which are ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing which protects ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version 410-C is designed ...
DN: 0.5 in - 3 in
Pressure: 8.5, 7 bar
Temperature: 0 °C - 50 °C
... sure seating of ball - Simple design allows easy access to the valve when replacing seals becomes necessary - Special retaining collar makes valve mounting quick and easy
DN: 2 in - 12 in
Pressure: 200 psi
• Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be ...
Temperature: 60, 100 °C
Flow rate: 4 l/min - 15 l/min
... of flow control valves offers excellent, economical, independent flow control, which can be used in any application where a needle flow control valve is required. SERIES CV100 FEATURES * OFFERS ...
MPB INDUSTRIES
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -25 °C - 180 °C
2 Pcs full bore ball valve construction: stainless steel CF 8M S (316). Investment casting. Gas threaded ends din 2999. Seats and seals: PTFE + 15% GF o´ring stem: viton. Manually operated by handle with locking system
DN: 0.5 in - 2 in
Temperature: -25 °C - 180 °C
3 Ways ball valve reduced bore. “T” bore construction: AISI 316; four seats PTFE + GF body and stem seats: PTFE o´ring stem: viton. Gas threaded ends DIN 2999. PN 63. Manually operated by handle with locking system.
DN: 0.25 in - 2 in
Temperature: -30 °C - 180 °C
3 Ways ball valve reduced bore. “L” bore construction: AISI 316; four seats PTFE + GF body and stem seats: PTF o´ring stem: viton. Gas threaded ends DIN 2999. PN 63. Direct assembling S/ISO 5211. Manually operated ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C
... in fluoropolymer valves have allowed us to provide you with an entrapment free, full flow-through component. These high-purity valves are available in numerous configuration alternatives in both 2 way ...
Saint-Gobain Performance Plastics - Process System
Pressure: 500 bar
The purge valve GAV is a rugged and competitively priced discharge valve. Its advanced design combines ease of use with excellent line availibility. Thanks to the compactness of its design, it is ideal ...
DN: 0.25 in - 1 in
This ball valve has a compact main body size and takes up little space for installation.
... seals. The result – a quality EGR valve, highly resistant to extreme heat, contamination, corrosion and wear. Precision engineered Even the smallest of differences in the shape of the valve head ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made ...
DN: 8, 2, 1 in
Pressure: 0 bar - 16 bar
Temperature: 0 °F - 400 °F
Protecting compressed air quality – no overwhelming of the air treatment system Compressed air treatment systems are designed for a certain rate of air flow which, when the system is operating at full load, pushes against the pressurized ...
Temperature: 500, 1,000 °F
... firing systems. Stock Knife Gate Valves (KGV) are specially constructed valves designed for extreme service. This ability to isolate portions of the burner line allows routine maintenance to be performed ...
Schenck Process Holding GmbH
DN: 12 mm - 20 mm
Pressure: 7.3 psi - 65.3 psi
Flow rate: 0.8 l/h - 3 l/h
1.Mould the dripper for one time; 2.The dripper with its filtering window, has the new style wide and long flow channal; 3.The dripper has spacious area for filtering and wide size of flow channal section, so the blocking resistance ...
DaYu Water-saving Group Co.,Ltd.
Adapter valve dia. 20 mm for direct pressure Twiny, Malice and Elfi gas bottles with valve 20 mm male outlet bottle FR.
GUILBERT EXPRESS
DN: 0.78 mm - 1.32 mm
Pressure: 0 bar - 7 bar
M Series Solenoid Valve is a sub-miniature 2- or 3-way valve that implements efficient power conservation. In battery-powered applications, the M Series can be designed for extreme low wattage conditions. ...
DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar
Temperature: -40 °C - 200 °C
GAR-SEAL® Butterfly Valve for Control, Throttling and Shut-off Duties GAR-SEAL® valves are used extensively where corrosive, abrasive, and toxic media need to be reliably controlled. They are typically ...
Valves and Subplates For inline applications, use the 61642 Valve mounted on a 61646 Subplate. This set-up is also recommended for use with high volume air-powered hydraulic pumps in StayLock applications. ...
DN: 5 mm - 100 mm
SELECTION VALVE FOR SUCTION CUP FROM Ø5 TO 100 Applications leak limiter for suction cups outside of the part
SAPELEM
... pressure without the hassle of an attached hose. Brass valve maintains air pressure inside pipe plug so hose and air source can be disconnected and used elsewhere Quick connects let you attach monitoring valve ...
... sampling valve is designed according to the latest construction standards and recognized safety rules. Advantages • A sample can be taken during the process to ensure that the output meets specifications before further ...
Please specify:
Help us improve:
remaining