BONDIOLI PAVESI valves

DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C

... bottom stand with an insert hole, DIAPHRAGM VALVE TYPE 14 helps support the piping. The valve is also provided with a flange stand to increase installation safety. Built-in Travel Stop(15-50mm) DIAPHRAGM ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 100 bar

... Stem multi-stage sealing, valve seat elastic sealing design Safe and reliable Valve stem blowout prevention, fireproof, explosion-proof, anti-static and other functions design The torque is light ...

DN: 150 mm - 1,500 mm
Pressure: 0.2 bar - 3 bar
Temperature: 200 °C

Max Leakage Class III (FCI 70-2) End Connections: Wafer, Flanged Material: Carbon Steel, AISI 304, AISI316 General Characteristics - ON/OFF or MODULATING Service or according to Customer Drawing - Outside Bearing - Tightness ...

DN: 1 in - 6 in
Pressure: 10, 19 psi
Temperature: 100 °C

... widely adopted by our clients who can see the benefits this valve can bring. The valve has all of the high quality features you’d expect from the world’s leading manufacturer of PFA lined valves, ...

DN: 0.5 in - 24 in

Gate Valves serve as efficient stop valves with flow in either direction. They are commonly used when minimum pressure drop is important. Throttling is not recommended because partially open gate valve ...

A Ball valve is a quarter-turn valve used for shut-off application. The valve opens and closes the flow of the fluid via a built-in ball, that rotates inside the valve ...

Pneumatic butterfly valve has good two-way sealing function, it is used in pipelines of different media in petroleum, chemical industry, metallurgy, electricity, food, medicine, water supply and drainage, gas transportation ...

DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar

Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864

DN: 40 mm - 800 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 200 °C

Soft seated elastomeric Butterfly Valves SBE are available in either wafer or lug design for on/off, throttling or control applications for dilute acids and lyes, powdery media or gaseous service. Main features • ...

Flow rate: 55 l/min - 600 l/min

The valves for the GMV power units are packed with technology meant to last over time and offering unparalleled reliability. Hundreds of thousands of elevator systems running with our products are an unequivocal proof ...

DN: 25 mm

Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.

... by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting from one side. It is lockable and does not ...

Pressure: 250 bar
Flow rate: 20 l/min - 80 l/min

... diverter valves and 8-way diverter valves. The 6-way diverter valves can be both single, or stackable. Our range of diverter valves cover from 20 l/min until 80 l/min, ...

... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk ...

DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C

The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample

DN: 200 mm - 4,000 mm
Pressure: 25, 10, 40, 16 bar
Temperature: 0 °C - 80 °C

... to be removed with the valve remaining in service in the open or closed position. Operated with gearbox + handwheel and with ISO 5210 top flange to be coupled with an electric actuator, if required at a later date. Valve ...

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

Seal in the drop through opening,packing sealed to the outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up ...

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...

DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C

... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...

DN: 0.5 in

Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they ...

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 0.5 in - 12 in
Pressure: 100 psi - 290 psi
Temperature: -29 °C - 316 °C

... Design and Testing Standards​ API 598 Valve Inspection and Testing PED Design and fabrication of pressure equipment API 599 Metal Plug Valves-Flanged, Threaded and Welding Ends ISO 10423 Valves ...

DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C

The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...

DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet ...