Brevini valves

Pressure: 0 bar - 18 bar
Temperature: -30 °C - 65 °C
Flow rate: 5 l/min

... until the setpoint pressure is reached, then the valve closes. The valve opens from P to A when the consumer pressure drops. If the setpoint pressure exceeds, the valve works as a pressure ...

DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C

Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. ...

Pressure: 6 bar

The EBL wolf-mouth valve is used at the outlet of storage silos for the extraction of spray dried products.

DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C

... +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN 1092 PN 16.

Pressure: 140 bar

The CAREL E2V electronic expansion valves for low capacity applications combine high reliability and precise control, guaranteed by the equal percentage characteristic of the movable element and the 15 mm stroke without ...

Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C

1、Exhaust outlet locates over the body, which is convenient to install muffler to decrease noise and pollution; 2、The external force required by direction-change of series of M5B, M5R and M5L is provided by external mechanism, which ...

DN: 30 mm - 1,000 mm
Pressure: 40, 63, 100 bar

Middle and low pressure valves The standard line of VAPTECH Spherical valves is designed for diameter range from 300 to 1000 mm and pressure ratings 40, 63 and 100 bar. The valve ...

DN: 0.125 in
Pressure: 21 bar

The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids.

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -60 °C - 80 °C

... product range includes: Filter Regulators Filters Volume booster Lock-up valves Unidirectional and bidirectional flow regulators Quick Exhaust valves Shavo's Lockup Valve retains ...

DN: 15 mm - 150 mm

FEATURES & BENEFITS Class 150 to Class 2500 Size Range ¼” thru 10” (Class Dependent) Full and Reduced Bore Body Wall Thickness ASME B16.34, Forged or Cast Versions End Connections: SW, BW, RF, RTJ, NPT, BSP, Special Fire-Safe Design ...

Pressure: 0 Torr - 760 Torr
Temperature: 0 °C - 150 °C

... removed from the body without requiring removal of the valve from the system. Please contact us for options such as roughing ports or valves that remain open in the event of power failure. Manual Gate ...

Product Feature - Excellent Flow Characteristics, High sensitivity and easy to adjust. - Proline flow control regulators with polymer, nickel-plated brass or métal bodies, external or recessed adjustment screws, offer fine adjustment, ...

Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure differences than ...

DN: 0.5 in
Pressure: 0 bar - 16 bar
Flow rate: 0 m³/min - 60 m³/min

Mechanical Float Drain Valve FD work without loss of compressed air. A FD floating trap is the most effective of all solutions to the conclusion of the condensate system. It works without any loss of compressed air, ...

DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three ...

DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min

3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10

DN: 8 mm - 100 mm
Pressure: 125, 69, 100 bar
Temperature: -38 °C - 220 °C

3-pcs. ball valve with ISO mounting top for mounting of actuator without use of bracket. Antistatic stem with pyramid segment. Maintenance free stuffing box. Available as control valve. (Option: FDA ...

Temperature: -40 °C - 120 °C

... cavity vented to prevent Pressure lock Schrader valve options: 1/4” or 5/16” schrader valves available Integral schrader access fitting on brass body Full flow port design on valves ...

Pressure: 60 psi - 100 psi

The CA300 is a plastic dispensing valve suitable for applying cyanoacrylate adhesives and anaerobic chemistries. This versatile diaphragm dispense valve can be used for single component bead, dot, potting, ...

DN: 0.125 in
Pressure: 0 bar - 400 bar

Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high accurate control of vacuum or pressure. Low ...

DN: 25 mm - 100 mm

... easy replacement of existing valves. The GULBINAT standard ball valve can be used as a regulating valve, is piggable and avoids pipe blows. The use of the GULBINAT ball valve ...

Pressure: 125 psi

Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking Pressure Currently ...

Pressure: 35 bar

It is used to control the flow for regulator or pipe system

DN: 65, 80, 100, 150 mm
Pressure: 20 psi - 250 psi

... compact valve to minimize installation labor. • Ductile iron construction to ensure a lightweight valve to minimize shipping cost. • A variety of inlet and outlet connections. • Compact, Pre-Trimmed, ...

DN: 8 mm - 47 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 120 °C

DESCRIPTION • 2-way ball valve BSP female threated • Body and Ball Brass MS58 chromium plated • Seats PTFE • O-rings Viton® • Lever aluminium epoxy coated • Working pressure maximum 40 Barg up to 95° C., 25 Barg ...