DN: 40 mm - 160 mm
Pressure: 30 bar
Temperature: -20 °C - 130 °C
... noise generated by the main engine; 5. The intake valve integrates a relief valve, a makeup valve, and a pressure limiting relief valve. The solenoid valve ...
RedStar AirCompressor Parts Manufacturing Co., Ltd.
DN: 160, 120 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C
... cavitation noise generated by the main engine; 4. The intake valve integrates a relief valve, a makeup valve, and an inverse proportional valve, with standard accessories: ...
RedStar AirCompressor Parts Manufacturing Co., Ltd.
DN: 40 mm - 300 mm
Pressure: 15 bar
Temperature: -20 °C - 120 °C
... between the butterfly valve stem and valve body, which can effectively prevent wear caused by vibration; 5. The intake valve integrates a relief valve and an inverse ...
RedStar AirCompressor Parts Manufacturing Co., Ltd.
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
SAF S.R.L.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
SAF S.R.L.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
SAF S.R.L.
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the reverse side connect to a bracket ...
Hornung GmbH
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...
Pressure: 250 bar
Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in modules ...
DN: 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 100 °C
... mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. ...
PVA Plastik-Ventil-Armaturen GmbH
DN: 0.375, 0.5 in
Pressure: 0 bar - 5 bar
Temperature: 0 °C - 100 °C
The PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact ...
PVA Plastik-Ventil-Armaturen GmbH
DN: 0.375 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 100 °C
... bore addresses the need of many users for more fl ow. The models are designed with 7,8 and 12 mm valve seat bores, which are commonly found in "and 1" valves. This allows a high filling capacity in a compact design.
PVA Plastik-Ventil-Armaturen GmbH
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size)
F.lli TOGNELLA
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve ...
Ridart srl
DN: 3, 4 mm
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 60 °C
... 520 19/03/1955 and subséquent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - Application: petroc hernie al. food. pharmac eutic al & more. - Valve ...
Ridart srl
DN: 4, 3, 2 mm
Pressure: 230 mbar - 8,000 mbar
Flow rate: 400 l/min - 3,750 l/min
It’s a Protection System with ribbon coil: déflagration in-line flame arrester in according with Directive 2014/34/EU and harmonized standard EN ISO 16852:2016. - Used for hydrocarbons or chemical pipeline. - Stage II vapor recovery ...
Ridart srl
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...
Elite Line Industrial Corp.
DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C
... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, ...
Elite Line Industrial Corp.
DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C
... Application of Groove End Pilot Control Pressure Reducing Valve Our Groove End Pilot Control Pressure Reducing Valves are most suitable for Hydraulic systems. Hydraulic Pressure Reducing Valves ...
Elite Line Industrial Corp.
DN: 1 in - 8 in
Pressure: 0 bar - 400 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation ...
Pressure: 400 bar
Solenoid valve 4/2 is designed to control the lubrication supply in two-wire systems. This valve is capable of using MAX NLGI 2 grease with a maximum pressure of 400 bar (5880 psi). When the main circuit ...
SOATO FLUID SYSTEM
SOATOER is a supplier of lubricating components and systems. The company has long been committed to the design and development of new technologies and new products. SOATOER is a well-known supplier of lubricating components and systems. ...
SOATO FLUID SYSTEM
Pressure: 262 bar
Pneumatically actuated discharge valve for use in systems such as HANDY-H single-line hydraulic barrel pumps or pneumatic pumps. Supply air pressureMax:8 bar Lubrication pressure 241bar Hydraulic pressure required ...
SOATO FLUID SYSTEM
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF, Viton® The ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa
... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 12.7, 6, 0.375 mm
Pressure: 0 MPa - 0.8 MPa
Temperature: -10 °C - 145 °C
Sanitary Stainless Steel Sterile Sampling Valve Connection: clamped, threaded, welded, flanged Material: SS304, SS316L Size: DN6-15 Application: Dairy, Beer, Food, Beverage, Pharmaceutical, Biological Engineering ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 25.4 mm - 101.6 mm
Pressure: 0 bar - 0 bar
Temperature: 20 °C
... butterfly valve Size:1"-4" Clamp-type pneumatic butterfly valve criteria: DIN, SMS, ISO, 3A, IDF, RJT Clamp-type pneumatic butterfly valve material: AISI304 or AISI316L with material ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min
AWF
DN: 150 mm - 180 mm
AWF
AWF
DN: 4, 6 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C
Valve NBZ-5 is a nebulizer of liquids with venturi effect operation and adjustable spout by means of a knurled ring. It is especially suitable for following uses : Lubrication of machine members. Lubrication and cooling ...
Bonesi Pneumatik s.r.l.
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
Bonesi Pneumatik s.r.l.
DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.
Bonesi Pneumatik s.r.l.
... E-car Battery Pack ex-proof Vavle · Pressure equalization and release in order to extend seal life · Can open the valve rapidly when heating up under a abnormal status. · Prevent condensation · Block contaminants ...
Pressure: 100 mbar - 200 mbar
Overviews Enclosures and containers: a look at their vulnerabilities and the role of Milvent Vents in preventing failure In the high-tech world of today, enclosures and containers are a crucial part of protecting sensitive equipment ...
At ARIS, you receive high-quality electrical and pneumatic actuators and robust industrial fittings. We supply individual products for self-assembly or replacement drives and accessories. Of course, we also assemble ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
Pressure: 10 bar
Temperature: -5 °C - 70 °C
Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
C.Matic S.p.A.
DN: 0.125 in - 0.75 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 80 °C
Quick Exhaust Valve This valve can easily vent the circuit in case of an air supply failure. If assembled on the cylinder port, it increases the cylinder speed. DATASHEET Recommended tubings: according ...
C.Matic S.p.A.
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer when connected between the valve and the cylinder to operate. Pressure is being saved and rod speed decreased in the ...
C.Matic S.p.A.
Pressure: 10 bar
• Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball ...
DIVATEC,SL
DN: 20 mm - 63 mm
Pressure: 10 bar
... To cut pipe systems Fluids Neutral media free of solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according ...
DIVATEC,SL
... operation is accomplished by using the geared limit switch and the torque switch inside the Limitorque, to move the poppet valve. The rotary vane air motor is compact and powerful. SMBA is ideal actuator for the use ...
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...
Tecnidro
The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other ...
Please specify:
Help us improve:
remaining