- Hydraulics - Pneumatics >
- Valve >
- Seat valve >
- BURKERT
BURKERT seat valves
Pressure: 10 bar - 500 bar
max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.
Pressure: 400 bar
Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve ...
DN: 25 mm - 150 mm
Pressure: max 10.0 bar
... double seat valves were developed according to the EHEDG criteria and are among the most modern leakage-proof valves of our time. They are used for the mixture-safe separation of incompatible ...
DN: 50 mm - 60 mm
Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat ...
DN: 0.5 in - 8 in
... Habonim’s line of Flanged Full Port Ball Valves in ANSI Class 150 and ANSI Class 300. Ideal for conditions which require maximum pressure drop, reducing risk of clogging with solids or slurries. Habonim’s full bore valves ...
DN: 25 mm - 104 mm
PNEUMATIC SEAT VALVE, 2 WAYS (L SHAPE) - STAINLESS STEEL 316L
DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C
ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection for optimal stop/flow ...
DN: 600 mm - 1,200 mm
Pressure: 6, 10, 16 bar
Temperature: -30 °C - 130 °C
Wafer type butterfly valve for installation between flanges EN 1092-1, PN 6/10/16. One-piece body. Continuous valve stem, internally connected with the valve disc by dowel pins. The connection ...
GEFA Processtechnik
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...
Pressure: 16 Pa
Temperature: -10 °C - 180 °C
... PP1020 Series Normally Closed ; PP1021 Series Normally Open Advantage of TORK Pneumatic Piston Valves ● Less pressure drop than the globe valves ● Short open-close time ● High flow rate ● Body ...
Pressure: 16 bar
Temperature: -10 °C - 180 °C
3/2 Way pneumatic piston valves . Connection : 1/2"-2"
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
Features of Double Acting Angle Seat Valve Can Be Easily Converted From Nc To No and From double Acting To Single Acting. Operator Having Threaded Ports Is Ideally Suited For Area In Which Contamination ...
DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: -10 °C - 80 °C
The ADCATrol PAV21 is a series of pneumatic angle seat shut-off valves with piston actuators. These valves are suitable for use with the most common process fluids such as steam, water, ...
DN: 15 mm - 50 mm
Pressure: 0.3 bar - 5 bar
Temperature: 0 °C - 180 °C
... sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials ...
DN: 0.5 in - 4 in
Pressure: 16 bar
Temperature: 0 °C - 170 °C
The ADCAPure V926H is a series of single seated two-way hygienic control valves with angle connections. These valves are designed to regulate and accurately control flow of liquids and gases and are suitable ...
Pressure: 20 psi - 300 psi
DN: 15 mm - 50 mm
Pressure: 6 bar - 10 bar
... To block and also regulate in industrial plants Fluids • Neutral media and aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to ...
DN: 40 mm - 700 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 70 °C
INFINITY and its new wedge and stem technology ensures smooth functionality with outstanding low torque values. New guiding system for the wedge with male composite sliding skate in order to easily achieve the 2500 cycles enurance test ...
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...
Athena Engineering S.r.l.
DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar
Temperature: -29 °C - 80 °C
... Rising stem gate valves - Have the threads external to the valve body. The gate valve stem is moving up when the valve is opening. - In this way, you can visually ...
Athena Engineering S.r.l.
DN: 40 mm - 300 mm
Pressure: 16 bar - 100 bar
... diffluence) control valve has functions of dividing one-way flow into two-way flow or combining two-way flow into one-way flow. It has features of S-shape passageway、cage-guided、quick-disassemble seat ...
Athena Engineering S.r.l.
DN: 0.5 in - 2 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C
Port Refer below technical data sheet (Available BSP / NPT) End Connection - Screwed / Flange / Tri-Clamp Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / VITON / EPDM / SILICON Media Steam, Air, Water, Chemical, Gases, ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange / Tri-Clamp > Body Material: - SS ...
DN: 0.5 in - 2 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... not essential. Multiple Function with the same operator - NC / NO / Bi-Directional. Flow direction below or above the seat. Media: Steam, Air, Water, Chemical, Gases, Oil, Diesel, Hot Water.
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
The 21IA4T15GC is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator ...
ODE
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C
Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures in accordance with ...
Di Nicola Infinam Srl
DN: 25 mm - 150 mm
Pressure: 10 bar
... special tools Valve bodies made from solid bar Balanced valve members made from solid bar Auxiliary washing system (optional) Upper and lower lift control (optional) Serviceable actuator The B935 ...
BARDIANI VALVOLE S.p.a.
DN: 0.75, 0.5 in
Pressure: 6,000 psi
Temperature: 200 °F
... 6,000 psi pressure rating @ 200 °F Replaceable Delrin® seat and straight through porting for bidirectional, high capacity flow and easy roddable cleaning PCTFE or PEEK soft seat optional ...
NOSHOK
DN: 6 mm
Pressure: 600, 420 bar
Temperature: -55 °C - 200 °C
... control styles, the valve can always be adapted to the system requirements Hardened, ground and lapped seat valve components ensure permanent leaktightness and long service life Optionally ...
DN: 32, 25, 20, 15, 40 mm
Pressure: 16 bar
Temperature: -20 °C - 130 °C
1. The combination valve integrates oil separation seat, oil filter seat, minimum pressure valve, and temperature control valve, with a compact structure; 2. ...
DN: 15 mm - 250 mm
Pressure: 10 bar - 160 bar
... 5211 ACTUATOR MOUNTING • Body: WCB/CF8/CF8M • Stem:20Cr13/17-4PH/SS304/SS316 Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator
ROPO GmbH
DN: 50 mm - 500 mm
Pressure: 10 bar - 160 bar
... 5211 ACTUATOR MOUNTING • Body: WCB/CF8/CF8M • Stem:20Cr13/17-4PH/SS304/SS316 Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator
ROPO GmbH
DN: 25 mm - 500 mm
• Blow-Out-proof stem design • Body: WCB/CF8/CF8M Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator
ROPO GmbH
DN: 6 mm - 300 mm
Pressure: 0 bar - 27.6 bar
Temperature: -50 °C - 204 °C
... style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves and should ...
Parker Refrigerating Specialties Division
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining