Inner diameter: 28 mm - 76.2 mm
Pressure: 6 bar
... clean it by blowing air through before assembling hose to the vibrator. Repeat the cleaning process every time the hose is detached. Use hoses which are in good condition. Make sure ...
It produces Universal module pipe systems suitable for its own equipment and products within the framework of A to Z and Turnkey solutions. Modular Pipe systems have a wide range of products. CONNECTORS Clamps ...
Pressure: 4 bar - 7 bar
Temperature: -10 °C - 55 °C
... chemicals resistent.Sundström compressed air hoses are tested and approved together with the following products, and are intended for use together with Sundström SR 99-1 compressed air filter. They are also the only hoses ...
Sundström Safety AB
Inner diameter: 9.5 mm
Outer diameter: 16.5 mm
Delivered length: 100 m
High Pressure Oil-Resistant Rubber Hose Four Colors: Black, Red, Green, Blue, Yellow Water Flow Indicator: Protect the Machine.
All accessory products supplied by Plarad meet the strict requirements of the brand with regard to quality, reliability and safety.
Inner diameter: 2.5 in
Pressure: 15 bar
... jacket fire hose consists of an impermeable elastomeric lining, a synthetic fiber reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay ...
Pressure: 45,000 psi
... co-extruded over the built-up hose layers to provide a tough, chemical- and wear-resistant outer coating. Outstanding chemical- and wear-resistance Superb flow with minimal friction loss in hydraulic or fluid systems SHS ...
Inner diameter: 10, 9.5, 8 mm
Outer diameter: 16, 19.5, 12 mm
Pressure: 3 bar - 6 bar
... per box : 1 RSG compressed air breathing hoses are tested and approved together with the T-AirLine Filter Unit & Regulator and all T-AirLine headtops for a wide variety of applications and tasks. The hoses ...
Inner diameter: 4 mm - 100 mm
Pressure: 0 bar - 500 bar
Temperature: -54 °C - 250 °C
The pressure hose is chosen depending on the working pressure, temperature and medium output required. We mainly use PTFE hose in stainless steel braid. The material of this hose features ...
Pressure: 1 bar - 3 bar
... and U.S. / CANADA CHARACTERISTICS Sizes available: 6, 8, 10 and 12 mm Max pressure: 1-3 bars according to the diameter Hoses suitable for all gases APPLICATIONS Heating equipment device or process
AEM
Inner diameter: 12.7 mm
Outer diameter: 20.6 mm
Pressure: 160 Pa
31003 SAE 100 R1 AT high-pressure rubber hoses with BSP F-F straight threading, suitable for oil delivery, to be mounted on pumps or on hose reels. - Inner lining and cover: synthetic rubber resistant ...
Ompi Srl
Pressure: 15,000 Pa
... tise in air technology plants in the most varied of application areas, we offer a comprehensive range of welded pipe and duct components. We offer customized design and planning for the most varied ...
... Range PTFE Tubing is usually calling PTFE Pipe or PTFE Hose. PTFE Tubes are made of good quality PTFE,has best corrosion resistant and dielectricity. Description: PTFE Tubing is usually calling PTFE Pipe ...
Inner diameter: 3 mm
Outer diameter: 5 mm - 140 mm
Delivered length: 1 m - 60 m
Outer diameter: 5 mm to 140 mm Inner diameter: From 3 mm Tube length: 1 mm to 60 mm Note: Small tubes, e.g. 3 mm OD, are typically less than 10 mm long
Inner diameter: 16 mm - 63 mm
Outer diameter: 20 mm - 72 mm
Pressure: 4 bar
TURBO MULTILAYER PIPE PE-RT multilayer pipe in bars, length 4 m.
... comparison to equivalent lagged lines. - Outer pipe remains a fixed length. All contraction is taken up in the inner pipe. Applications Vacuum insulated flexibles are based on a pipe in pipe ...
Inner diameter: 6, 10 mm
Outer diameter: 16, 13 mm
Injection hose consisting of a slightly-foamed PVC (PVC = polyvinyl chloride) with ribbed surface for better locking into concrete Suitable for grouting with microfine cement, acrylate gel and polyurethane resin Can ...
TPH Bausysteme GmbH
Product Name: Oil Tubing Produce Scope: +EUE seamless tubing,+NU seamless tubing,+IJ seamless tubing Standards: API spec 5CT, API spec 5B Specification Range: 2-3/8", 2-7/8", 3-1/2", 4", 4-1/2",WT: 4.24-16mm Materials: H40, J55, ...
ESP Cable Solutions Co.,Limited
Inner diameter: 406 mm - 1,420 mm
Outer diameter: 285 mm - 1,314 mm
... articulated pipe sections that can be adjusted hydraulically. Different soil conditions may require the use of special tools, such as a hammer system. Special initial augers guarantee optimal control behaviour. The ...
Inner diameter: 0.312, 0.25 in
Pressure: 200, 750 psi
Temperature: -20 °F - 190 °F
Air Hose Specifications (Low Pressure): - Textile Reinforced - Smooth Red Synthetic Rubber Casing - Oil Resistant Fluid Hose Specifications (Low Pressure): - Tube: Nylon 11 (Silicone-Free) - Braided ...
Inner diameter: 150 mm - 2,500 mm
... rubber-steel clad pipe included: run pipe, elbow, tee, reducer, U-channel etc. The pipe diameter is from DN150-DN2500, jointed by flange, the thickness of rubber liner is 3-40mm. We can also produce pressure-bearing ...
... two pipes can be connected together easily by flanges. Polyethylene dredging pipe produces with common standards of polyethylene pipe and these two pipes have flange head. Polyethylene flanges are provided ...
Relong Tech
Pressure: 125, 200 psi
Uniweld's flexible Oxyfuel Hoses are color coded, have 8-sided crimp ferrules and are capable of withstanding high working pressures for reliability and long work life.
Inner diameter: 6.6 mm
Outer diameter: 12.8 mm
Pressure: 600 bar
Double textile braid hoses with Food Grade thermoplastic polyester interior. Coating in extruded polyurethane with GCS (Glued Cover System) anti-abrasion microperforated. Internal diameter: 1/4 “- 6.6mm; External ...
Inner diameter: 1 mm - 3 mm
Delivered length: 5 m - 15 m
The hose is the conveying line of the source extraction installation. The demands placed on the suction hose are: wear resistance low weight and flexibility not affected by extremes ...
Dustcontrol AB
Please specify:
Help us improve:
remaining