Clippard flap valves

DN: 0.25, 0.125 in
Pressure: 5, 0.6 bar
Flow rate: 0 l/min - 340 l/min

Closes the vacuum line when ejectors are inactivate, thus maintaining the vacuum pressure within the system.

DN: 10 mm

Check valve in PA Springless with two stainless steel balls Installation position : Vertical in flow direction Length : 37.5 mm Outer diameter : 10 mm For hose 6 x 4 (flexible)

DN: 10 mm

Stainless steel check valve Springless with two stainless steel balls Installation position : Vertical in flow direction Length : 34.0 mm Outer diameter : 10 mm Connection : M5

DN: 0.88 mm - 1.01 mm
Pressure: 0 psi - 250 psi

The CKV series check valve permits free flow in one direction and no flow (checked) in the opposite direction. This valve is specified in many applications because of its very low cracking pressure (typically ...

DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi

This Ultra Miniature low cracking pressure check valve permits free flow in one direction and no flow (checked) in the opposite direction. This valve is specified in many applications because of its very ...

DN: 2, 0.125 mm
Pressure: 0 psi - 100 psi

The CKV38 series check valve permits free flow in one direction and no (checked) flow in the opposite direction. The valve is specified in many applications because of its very low cracking pressure ...

Pressure: 700 bar

Check valve, hydraulically pilot operated max. operating pressure 700 bar. Design: Housing made of steel, surface galvanized. Spring-loaded ball acting as a valve element. The control connection ...

DN: 25.4 mm - 101.6 mm

Valves / Check Valves The 62B Air Blow Check Valves are "plug-style," where air pressure pushes the bonded rubber plug away from the seat. FEATURES In the absence of air pressure, ...

DN: 38.1, 50.8, 63.5, 76.2 mm

Valves / Check Valves Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. FEATURES Product flow pushes the ball up into the trap and out of the product ...

DN: 25.4 mm - 101.6 mm
Pressure: 1 psi - 5.9 psi

Valves / Check Valves Stops or check reverse flow in a pipeline. FEATURES W45 Series In the absence of forward flow pressure, the electropolished spring returns the disc and holds it closed ...

DN: 0.25, 0.5 in
Pressure: 0 bar - 25 bar

... flow valves are usually used when rupture discs are used together with a safety valve or when installed on multiple rupture discs in series. Excess flow valves close when exposed to ...

DN: 0.25 in - 2 in
Pressure: 600 bar

Body - SUS316 orSUS304 Cap - SUS316 or SUS304 Disc Bonnet - SUS316 or SUS304 Spring - SUP 3 Thrust Washer - SUS316 or SUS304 Boit - SUS304 Disc - Teflon Gasket - Teflon

DN: 0.5 in - 3 in
Pressure: 600 psi

* Investment casting ASTM-A351 CF8M, Screwed Cap, Swing Type Disc, Intégral Seat. Body - CF8M Cap - CF8M Disc - CF8M Connecting Rod - CF8M Disc Nut - SUS316 Pin - SUS304 Boit Washer - Teflon Gasket - Teflon Boit - SUS304

DN: 1, 0.5, 0.75 in
Pressure: 350 bar

NON-RETURN VALVE - Bezares SA - Leading hydraulic manufacturer Hydraulic valve for the flow control.

Pressure: 0 psi - 1,706.4 psi
Temperature: 50 °C
Flow rate: 50 l/min

Pressure: 0 bar - 1,706.4 bar
Temperature: 50 °C
Flow rate: 50 l/min

DN: 40 mm - 300 mm
Pressure: 5 bar
Temperature: 0 °C - 60 °C

The CR wafer check valve is designed to be installed directly between stubs and flanges in accordance with ISO/DIN standards.

DN: 32 mm - 400 mm
Pressure: 8, 10, 5 bar

The FR type swing check valve is designed to be directly installed between stubs and flanges according to ISO/DIN or ANSI 150 standards.

DN: 32 mm - 400 mm
Pressure: 10, 8, 6, 5 bar

The FR type swing check valve is designed to be directly installed between stubs and flanges according to ISO/DIN or ANSI 150 standards.

Pressure: 4,200 bar

Check valves only allow one direction of flow. A back flow in the opposite direction is prevented.

DN: 0.125 in - 3 in
Pressure: 1,000 bar

... The check valves are available for inert/flammable gases and for oxygen and come complete with the seals suitable for the relevant medium. All check valves comply with the European Pressure Equipment ...

DN: 3, 4, 5, 6 mm
Pressure: 0 bar - 250 bar
Temperature: -40 °C - 200 °C

WEH® Check Valve TVR200-S1 stainless steel, 0 - 250 bar - Product family The WEH® TVR200 Check valves made of stainless steel are ideal for applications with liquid and gaseous media up to max. 250 ...

DN: 6, 8, 12 mm
Pressure: 350, 500 bar
Temperature: -40 °C - 120 °C

C2.940 Flow control valves C2.940 Flow control valves max. operating pressure 500 bar ports: G 1/4

DN: 0.25 in - 0.5 in
Pressure: 500 bar
Flow rate: 15, 55 l/min

C2.9511 Pilot-operated check valves C2.9511 Pilot-operated check valves without/with pre-release pipe-thread type max. operating pressure 500 bar connections: G1/4 .. G 1/2 control port: G 1/4 control ...

DN: 5 mm - 9 mm
Pressure: 500 bar
Flow rate: 20, 50 l/min

C2.9512 Pilot-operated check valves C2.9512 Pilot-operated check valves without/with pre-release manifold-mounting type max. operating pressure 500 bar connecting bore holes: ø5 .. ø9 mm control ...

DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 200 °C

The O-Ring check valves are suitable for applications that require non-leakage sealing. It can be operated within the pressure of 1, 500 bar and is used for stopping the directional liquid and gas flow. It functions ...

DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 350 °C

The MAXIMATOR ball check valves can be used even with high temperatures. Their shut off liquids and gases up to a maximum pressure of 1,500 bar. All valves have collars and glands. The characteristic ...

Pressure: 4,500 bar
Temperature: -20 °C - 200 °C

... O-Ring check valves are capable of shutting off directional flows of gases and fluids. They are incorporated with a leakage-resistant sealing feature. The O-Ring and Ball Check Valves are well suited ...

Pressure: 2 bar - 8 bar
Temperature: -20 °C - 80 °C

This valve allows the transit of the air only in one way, the valve stops it in the opposite way. They are available with male or female thread, in several dimensions.

Pressure: max 40.0 bar
Temperature: -20 °C - 180 °C

Stainless steel AISI 316L non-return valves, are designed for harsh usage conditions. The driven shutter and the spring never compressed completely, guarantee very high intervention frequencies.

DN: 0.5 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C

... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...

DN: 0.5, 1, 0.75 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C

... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...

DN: 1.5 in
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 70 °C

... non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every non-return valve ...

DN: 0.062, 0.25, 0.125, 0.18, 0.09 in
Pressure: 0 psi - 50 psi

Umbrella check valves are Air Logic's first-in-class robust innovation in low cracking force inline non-return valves. The plastic bodies with preloaded elastomer umbrellas are designed for cracking pressures ...

DN: 0.125, 0.06 in
Pressure: 0 psi - 10 psi

Miniature check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Floating disk style check ...

DN: 0.17, 0.125, 0.063 in
Pressure: 0 psi - 75 psi
Temperature: 5 °C - 48 °C

Check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Floating disk style check valves ...

DN: 6, 12, 10 mm
Pressure: 206 bar
Temperature: -20 °C - 190 °C

NO RETURN VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316 Inox 316

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: 0 °C - 180 °C

SPRING LOADED 3 PIECES CHECK VALVE - FEMALE / FEMALE BSP OR NPT - STAINLESS STEEL 316

DN: 25 mm - 104 mm
Pressure: 10 bar
Temperature: -20 °C - 130 °C

CHECK VALVE PLAIN ENDS - EPDM GASKETS - STAINLESS STEEL 316L Inox 316L

DN: 0.25 in - 2 in
Pressure: 0 bar - 15.9 bar
Temperature: -18 °C - 93 °C

... high-quality Check Valves are specially manufactured in the U.S.A. by ANVER, for ANVER lifting systems. Versatile, one-way Check Valves work with nearly all of ANVER’s vacuum applications where vacuum ...

DN: 25 mm - 300 mm
Temperature: -20 °C - 100 °C

... distances Valve hydraulics without dead volume ensure optimum conditions for high-purity fluids. Static sealing to atmosphere Pre-loaded valve disc and short travel to closure prevent pressure surges. Maintenance-free Soft ...

DN: 0.75, 0.5 in
Pressure: 10 bar - 250 bar
Flow rate: 0 l/min - 360 l/min

... order. The valve can receive a maximum incoming flow at 60 L/min. The valve can regulate the following fixed flows: 15-21-25-30-36 L/min. The regulated pressure valve must be adjustable ...

DN: 1 in
Pressure: 10 bar - 350 bar
Flow rate: 50, 90 l/min

... precise regulation. The valve can receive a maximum incoming flow of 90 L/min. The valve can regulate a maximum flow of 50 L/min. The output regulated flow is adjustable according to necessity in any ...

DN: 0.06 in
Pressure: 30 psi
Temperature: 40 °C - 150 °C

A check valve is a type of valve that allows fluids to flow in one direction but closes automatically to prevent flow in the opposite direction (backflow). Applications Include: Medical, HVAC, Light ...

DN: 0.125 in
Pressure: 0 psi - 100 psi
Temperature: 4 °C - 66 °C

A check valve is a type of valve that allows fluids to flow in one direction but closes automatically to prevent flow in the opposite direction (backflow). Applications Include: Medical, HVAC, Light ...

DN: 0.25 in - 2 in
Pressure: 0 bar - 21 bar
Temperature: 0 °C - 220 °C

The RT25 all stainless steel disc check valves have a compact design and were specially designed for use with steam and hot condensate. MATERIAL: Stainless steel SIZES: 1/4” to 2” CONNECTIONS: Threaded ISO 7 Rp or NPT

DN: 15 mm - 100 mm
Pressure: 40, 33.7, 31.8, 29.7 bar
Temperature: 100, 200, 250, 300 °C

The RD40 disc check valves have a compact design and are specially designed for use with steam and hot condensate. RD40 DN 125 - 200/MATERIAL: Stainless steel RD40 SIZES: 1/2” to 4” – DN 15 to DN 100 5” to ...

DN: 0.5 in - 4 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 200 °C

The ADCAPure SRT10 all stainless steel disc check valve has a compact design and is specially designed for use with clean steam, hot condensate, WFI and other process fluids. These valves are particularly ...

DN: 2 in - 36 in
Temperature: -54 °C - 350 °C

... and ASME B16.34. Athena manufactures valves from genuine guaranteed raw material with material test certificate, hydraulic test certificates, MiTC 3.1 available with all supply. Also, we can provide valves ...

DN: 2 in - 60 in
Pressure: 16 bar - 420 bar
Temperature: -29 °C - 425 °C

... stress and maximizing service life. - The valve is designed with two discs hinged at their sides like a door, eliminating the effect of gravity. Consequently, very little energy is needed to open the valve ...

DN: 2 in - 24 in

... maintenance services. Athena manufactures valves from genuine guaranteed raw material with material test certificates, hydraulic test certificates, MTC 3.1available with all supply. Also, we can provide valves ...

DN: 0.02, 1 dm
Pressure: 1.5 bar
Temperature: -20 °C - 60 °C

The angle check anti-siphon valve is an essential safety accessory designed to prevent the siphoning of liquids from an aboveground tank. Constructed from stainless steel, this valve ensures longevity ...

DN: 2.5, 2, 1.5 in
Temperature: -20 °C - 60 °C

... Model 62 Angle check valve is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits its flow only towards dispenser. This valve is installed on the manhole lid of the ...

DN: 2 in
Temperature: -20 °C - 60 °C

The STAINLESS STEEL ANGLE CHECK VALVE RIDART is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits the product flowing only towards a dispenser. The valve is normally ...