Clippard flap valves

Pressure: 0 mbar - 600 mbar
Temperature: 20 °C

Operating: the manual pressure gauge valve enables, by pushing the button, to check the existing pressure when testing the system. By releasing the button, the valve automatically closes; the manual pressure ...

DN: 6.35 mm - 19.05 mm
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 80 °C

... function as e.g. load holding or part of sequence valves. Typical application are systems for agricultural or industrial machineries DESCRIPTION The VUI series’ valves are unidirectional valves ...

... completes its product range by the full range of ball valves and non-return valves employed where fluid flows in one direction and has to be kept under pressure. Our non-return valves ...

DN: 1.813 in - 7.063 in
Pressure: 3,000 psi - 20,000 psi
Temperature: 121 °C

Cameron designs and manufactures various types of API Spec 6A valves suitable for the demanding environments of onshore and offshore drilling and production, including large-bore completions pressure and temperature ...

DN: 6 mm - 150 mm
Pressure: 0 Pa - 0.2 Pa
Temperature: -60 °C - 200 °C

... interrupted or the flow direction is reversed, the valve closes automatically. A built-in damping device makes this type of valve especially suitable in cases where capacity requirements fluctuate. GEA ...

DN: 20 mm - 150 mm
Pressure: 27.6 bar
Temperature: -30 °C

... feature makes these valves ideal for systems that use a VFD or compressor unloading feature to reduce capacity as they can tolerate load fluctuations better than alternative check valve technologies. ...

Pressure: 0 bar - 420 bar
Temperature: -37 °C - 204 °C
Flow rate: 1.6 l/min - 500 l/min

... ), Parker’s poppet and ball style check valves have a simple and robust design which are used to block flow in one direction, and allow flow in the opposite. Parker’s robust poppet and ball style check valves ...

DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C

Check valves, Check valves streamlined flow type, Check valves streamlined flow type on carbon steel PN 40 - ANSI 150 (1.0619) Streamlined flow check valve series ...

DN: 80 mm - 300 mm
Temperature: -10 °C - 550 °C

... the pressure in the valve body, the tighter the cover joint. Very low risk of leakage, particularly at high pressures and temperatures. Compact design. Reliable, tight shut-off and service-friendly design due to flexibly ...

DN: 10 mm - 400 mm
Pressure: 10 bar - 400 bar

... HOERBIGER plate check valve? The high dynamic valve characteristics of HOERBIGER plate check valves protect reliably from back-flow and thus, increase the availability of your high ...

DN: 2, 1, 3 in
Pressure: 15,000 psi

... premium quality plug valves offering for a wide range of well drilling production&well-servicing applications. Available the range in size1”ro 3”&pressure rating upto 15000psi. Other valve products, such ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 90 °C

Pressure fluctuations in a water distribution circuit can cause a reversal of the flow direction. In this case a check valves, installed between the water distribution system and the mains water supply, closes automatically ...

DN: 4 mm - 12 mm
Pressure: 0 bar - 10 bar
Temperature: 32 °F - 316 °F

Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other.Fitted upstream of the circuit to be protected, they provide total protection. Non-return valves ...

... control valves These valves are designed to regulate the cylinder piston speed Check valves Full flow in one direction flow blocked in the opposite direction Pilot-operated check ...

DN: 15 mm - 125 mm

Ensures airflow is uni-directional. Lightweight swinging disc design

Pressure: 0 psi - 3,000 psi

... trade; D08 MODULAR STACK VALVES Check, Flow Control, Cross Port Relief, Pressure Reducing/Relieving, Counterbalance Valves & Pressure Compensator Description Modular stack valves ...

Pressure: 350 bar

The cartridge valves are equipped with covers and poppet or spool cartridges. These components are fitted to comply with ISO cartridge standards and guarantee hydraulic piloting. Depending on the covers of the model ...

DN: 10 mm - 80 mm
Pressure: 16, 6, 10 bar
Temperature: 0 °C - 80 °C

Modular series concept Flaoting cone design Seal materials - EPDM, FPM Connections - flange, PE fusion socket, PE fusion spigot, solvent socket, solvent spigot, threaded socket Approvals - Declaration of Conformity acc. to Annex ...

DN: 0.375 in
Pressure: 10,000 psi

Application: Permits flow of hydraulic oil in one direction only. Operation: Installs right in hydraulic line.

DN: 14.3 mm
Pressure: 241 bar
Temperature: -54 °C - 204 °C

... cartridge style, hydraulic check valve for use as a blocking or load-holding device. Operation The cartridge valve allows flow from port 1 to 2, while normally blocking flow in the opposite direction. ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 5 bar
Temperature: -20 °C - 80 °C

* Robust Design * Small in Size * Universal Fitting position Housing made out of Brass and strainer made out of Stainless Steel Wire mesh (Max. Mesh Size 100 micron) FLUIDS : Natural Gas, LPG, Town Gas, Oxygen, Air, Other gases on request(Except ...

DN: 0.5 in - 4 in

True Union Ball Check Valve (1/2"-2") and Single Union Ball Check Valve (3"-4") The Asahi/America ball check valve employs a free moving ball, which unseats to permit flow in one direction, ...

DN: 0.5 in - 24 in

... FAMAT Check Valves, also referred to as non-return valves, are functionally used to allow certain fluids to flow in a singular direction without having the event of a counter flow. The company also ...

DN: 0.5 in - 2 in
Pressure: 13.8 bar

... swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve features a Y-pattern design with renewable seat and disc, and solder end connections for ease ...