Cross & Morse flange couplings

Torque: 0.4 Nm - 712 Nm
Rotational speed: 4,200 rpm - 31,000 rpm

... expanded its comprehensive family of quality industrial couplings to include the Type ‘C’ Jaw, offering a uniquely simple design combined with misalignment capability and maximum economy. The ‘L’ coupling ...

Torque: 33 Nm - 7,000 Nm
Rotational speed: 100 rpm - 7,700 rpm

The coupling consists of two machined cast iron hubs connected by an elastomeric gear ring. Available in 8 basic sizes, with torque capacity to 3300 Nm, the KE coupling provides positive power transmission ...

Torque: 600 Nm - 90,000 Nm
Rotational speed: 700 rpm - 6,000 rpm

Coupling types GFA and GFAS are designed for heavy industrial applications, providing a torsionally stiff connection of shafts which can accommodate angular and parallel misalignment and axial movement. Gear Couplings ...

Torque: 17.5 Nm - 1,505 Nm
Rotational speed: 3,800 rpm - 6,500 rpm

... stress and deflection - an important operational advantage and one which contributes greatly to the life of the coupling. Morflex couplings can be used in ambient temperatures ranging from -15°C to 95°C. All ...

Torque: 18 Nm - 36,000 Nm
Rotational speed: 2,100 rpm - 12,000 rpm

... turbine drives. Crossflex Disc Couplings Three hub designs as well as the option of a spacer provides numerous design possibilities to accommodate space limitations and shafting dimensions. Crossflex Couplings ...

Torque: 250 Nm - 2,270,000 Nm

... , and minimal axial length. These clamping elements are basically to same design as RCK 13, but with increased diameter flange to locate hub and prevent axial movements, so combining good concentricity with positive ...

Torque: 264 Nm - 136,500 Nm

These clamping elements are basically to same design as RCK 13, but with increased diameter flange to locate hub and prevent axial movements, so combining good concentricity with positive axial location. The increase ...

Torque: 294 Nm - 48,200 Nm

... pressures also. This design can be mounted within the confines of a hub providing a stepped bore is provided to accommodate the flange.

Torque: 12 Nm - 29,041 Nm

... design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of ...

Torque: 45 Nm - 3,133 Nm

... design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of ...