Cross & Morse one-way bearing clutches

Torque: 54 Nm - 2,440 Nm
Diameter: 50.8 mm - 114.3 mm
Rotational speed: 300 rpm - 1,800 rpm

... groove ball bearing with snap ring in outer race locating in recess dia. D. The outer race of the clutch is tapped for attaching sprocket, gear or ratchet arm Intended primarily for indexing applications, ...

Torque: 53 Nm - 1,695 Nm
Diameter: 16.5 mm - 56 mm
Rotational speed: 1,800, 2,500, 2,000 rpm

... outside diameter is the same as 62 series ball bearing enabling simple fitting beyond the bearing on intermediate or output shafts of gearboxes. Bore sizes range from 16.5 mm to 56 mm for operation alongside ...

Torque: 13 Nm - 35,500 Nm
Rotational speed: 200 rpm - 6,200 rpm

... have bearing support with the shaft in order to provide the necessary concentricity within the clutch. The tolerance of the housing bore 'D' should be H7 or G7, and the shaft h6 or j6. ANR Clutches The ...

Torque: 1.7 Nm - 35,600 Nm
Diameter: 15.8 mm - 420 mm
Rotational speed: 600 rpm - 7,500 rpm

Type CNAS and CNFS Freewheels are light duty Roller Ramp Clutches manufactured to standard bearing dimensions; type CNAS to 62 series ball bearings, and type CNFS to ...

Torque: 2 Nm - 140 Nm
Diameter: 8 mm - 72 mm
Rotational speed: 1,900 rpm - 15,000 rpm

... shaft. The outer is still fitted into the housing with a heavy press fit, the bearing clearance being modified to allow for one race only having the heavy press-fit. Clutch types CKKNN ...

Torque: 44 Nm - 56,000 Nm
Diameter: 20 mm - 30 mm
Rotational speed: 200 rpm - 56,000 rpm

... lubrication, enabling easy fitting to drive equipment. Roller Ramp Clutch with Ball Bearings AGF/AGFN The AGF Freewheels can be used with special flanges providing ...

Torque: 0.6 Nm - 240 Nm
Diameter: 16 mm - 95 mm
Rotational speed: 2,200 rpm - 10,000 rpm

... Type GFK - Ball and Roller Bearing Sprag Clutches The GFK clutch combines a sprag unit with a roller bearing and ball bearing into a unit which dimensionally ...

Torque: 460 Nm - 18,450 Nm
Diameter: 20 mm - 120 mm
Rotational speed: 130 rpm - 450 rpm

... series of Clutches are specifically designed for backstop applications, for simple fitting to Conveyor and Elevator Headshafts. Their design allows easy installation on new or existing equipment. Backstop ...