DOPAG industrial pumps

Flow: 0.01 l/min
Pressure: 20 MPa
Power: 24 W

... cartridges. ● Be careful not to let air enter the pump when replacing the cartridge. ● After greasing or after replacing the cartridge, be sure to open the air vent plug and vent the air inside the pump.

Input diameter: 100 mm - 700 mm

... centrifugal pump type TPKR offers all advantages of a dry installed centrifugal pump and is completely overflow-proof. The motor, terminal box and fan are IP68 rated and guarantee uninterrupted operation. ...

Flow: 11, 22 m³/h
Pressure: 4 bar
Power: 4.5 kW

Technical Data / Performance Data • Suction lift max. 8 m • Solids grain size max. 16 mm • Suction connection Storz C 2 1/2“ standard coupling DIN 14307, alternatively 2 1/2“ AG, flange DN65 PN16 • Pressure ...

Flow: 2.8, 3.5 us gal/min
Pressure: 65 psi

◆ Positive Displacement ◆ 3 - Chamber Diaphragm Pump ◆ Permanent Magnet & Carbon Brush ◆ 24 VDC/AC, 115 and 230 VAC available ◆ 1/2"-14 NPT ◆ Adjustable Shut-Off Switch ◆ Santoprene ...

Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m

... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting ...

The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...

Flow: 1 l/min
Input diameter: 4 mm
Weight: 2 kg

... water resistant. The pump can deliver a pump pressure of 3 bar, which makes it suitable for use with in-line filters, and an underpressure maximum of 1 bar. It is a self-priming pump. ...

Power: 0 kW - 55 kW

Hydraulic pump motor unit - for applications where the system requires hydraulic flow. The AC Hydraulic motor pumps are made up of an AC Motor driving a Hydraulic gear pump assembly. AC ...

Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"

... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline.

Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW

... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump ...

Flow: 130 l/min
Pressure: 0.3 bar

... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing ...

Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW

The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...

Flow: 3.17, 5.07 l/min
Pressure: 4,150, 3,800 bar
Power: 30, 50 ch

The HyPlex@ Prime pump represents the next generation of energy efficient, direct drive ultrahigh-pressure waterjet pumps. The HyPlex's direct drive delivers superior ratio of input energy to the waterjet. Next ...

Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply options including: Small ...

Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW

... compared with conventional models) • Long Life Increased 10% with newly developed vane blade material. (compared with conventional models) Operation not allowed at ultimate vacuum.For model selection ...

Flow: 0.2 l/min
Pressure: 500 bar

... cintrolor with thermal couple 4-3 Pressure control=Pressure gauge/Pressure Transducer 4-4 CO2 flow comtrol：flow meter / display the gas CO2 flow rate

Flow: 160 l/min

Flow: 1.3 l/min - 450 l/min
Pressure: 35 bar - 120 bar

... Description PH pumps are robust, reliable piston grouting pumps, offering the possibility of computer piloting. PH pump range is very large and allows covering the complete grouting ...

Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW

... for the pump NPF 1/10. It can be assembled with drainage nozzle and valve. All the pumps are equipped with a screw for additional mechanical mixing before sewage get into the pump. Up ...

V Series High Pressure Pump System - Internationally Applicable 1. Siemens three-phase asynchronous motor and Rexroth constant pressure plunger pump are combined to serve as the power unit of the system, ...

Flow: 10 m³/h - 90 m³/h
Pressure: 300,000 Pa
Power: 4 kW - 22 kW

GNG Series Centrifuge feed pump is a positive displacement pump, also called screw pump. The GNG positive displacement pump is an ideal pump for feeding ...

... cps. The pumps are ruggedly constructed with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action Drum Pump is supplied with the appropriate adapters for quick and easy installation. EZI-action ...

High-reliability Water Pump Developed from the Engine System Requirements The material of mechanical seals having a large role to play in preventing cooling water leakage changed to silicon carbide (SiC) from alumina. ...

The grouting pump P101PE is suitable for compensation grouting through pipes fitted with valves, or any other application where an accurate control and record of grouting variables is required. Also can be used as a flushing ...