Dropsa lubricant pumps

Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW

This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, ...

Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C

Particularly suitable for use on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure ...

Pressure: 3 bar

... , that spring will act on the piston by pushing lubricant into the delivery piping. Relative value The relative value determines the number of the Single Line 01 distribution cylinders which the pump ...

Pressure: 5 bar

Positioned in the center of the installation compared to the two lines it allows to improve the length of the facility. It can be used with a single exit, another exit is closed by a special flip. Key features: - Output : 2 cm³ per ...

Pressure: 3.3 bar

Pump for applications with built-in reservoir and easy operation: simply pull the handle upwards with a quick movement and then release to deliver lubricant. Pump is applied with ...

Pressure: 150, 130 bar

Hand Pumps Series 3415 and 3416 have been designed to be used with Serial 26. Pumps of sturdy construction and reliability; steel body, hardened and lapped double acting steel piston ...

Pressure: 10 bar
Fluid temperature: 0 °C - 70 °C
Weight: 2.5 kg

... Save on lubricant · The reservoir can be connected above or below the pump, up to 0.5 metres · The PRM can run without lubrication up to 1000 hours without seizure in ...

Flow: 0.35, 0.5, 1.2 l/min
Power: 0.19 kW - 2.2 kW

These new electric gear pump units have been designed as the result of over thirty years experience in the field of developing and manufacturing gear pumps. The application possibilities are numerous; ...

Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.44, 0.55, 0.18, 0.25, 0.37 kW

... lubrication system is preferably used, if an additional cooling and cleaning of the lubrication point is requested. In this lubrication system, after the supply to the lubrication point, ...

Flow: 0.06 l/min - 3 l/min
Pressure: 35 bar
Power: 0.18, 0.25, 0.37, 0.55 kW

... lubrication system is preferably used, if an additional cooling and cleaning of the lubrication point is requested. In this lubrication system, after the supply to the lubrication point, ...