Dropsa valves

DN: 0.5 in
Pressure: 2 bar - 10 bar
Temperature: 75 °C

... of Trident auto-drain valves In the progression of automatic drain valve manufacturing technology, Trident’s condensate sensing type automatic drain valves are the newest. Quintessentially ...

DN: 2 in - 24 in
Temperature: -29 °C - 200 °C

... Trunnion Ball Valve Temperature: - Normal Temperature Trademark: - SOLID Transport Package: - Plywood Case Type: - Trunnion Ball Valve Trunnion mounted ball valve usually ...

... Electric Ultra-High Vacuum Gate Valve Applicable range (Pa) - 105～1.3×10-7 Gas leakage rate (Pa.L/S) - ≤1.3×10-7 ≤1.3×10-7 Valve”s roasting temperature（℃） - ≤150(Except the drive device) Pressure ...

DN: 1.5 in
Pressure: 200,000 Pa
Temperature: -20 °C - 55 °C

Characteristics Uses: the emergency shut-off valve is installée! on the inlet of the pipeline for the submersible pump type fuel dispenser. In case of accidents, for instance, the dispenser collapses or catches a fire, ...

Suction Valve Cconnects the tank and the piping. Attach this accessory to the chemical tank outlet to easily and reliably connect the tank and the piping. The built-in strainer also prevents the entry of debris.

DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C

... quickl valve can be installed in the piping and some important position such as outlet of compressor and upstream of pneumatic tools .Good for the separation ,adjustment and maintenance . Quick install . Provide ...

Pressure: 20 bar - 200 bar

Volumetric Metering Valves AXDV-C Ultimate process reliability at lowest dosage volumes – made possible by the new ABNOX Valve. It allows accurate placing of minute quantities of your complex lubricant ...

Pressure: 1 bar - 8 bar
Temperature: 0 °C - 60 °C

... works together with ZVAB-NC. ● ZVAB-NC provides an air control signal to realize the opening and closing of the control valve and save energy.

... close the valve. The sleeve’s flexibility allows the valve to close drop-tight around entrapped solids, eliminating hang-ups that can damage the valve. Sealing area is equal to 95% ...

... the sleeve chamber, allowing the valve to open. MANUAL CONTROL All valves are equipped with a three-way manual selector valve. Manual OPEN / CLOSE control is used to open or close. ...

DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management of ISO 9001. Suitable for ...

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve exceeds T22 requirements ...

Pressure: 0 bar - 10 bar

Quick exaust valve series -working pressure: 0-10 BAR -body in nickel plated brass

Pressure: 70 psi - 260 psi

... self-modulating cooling control valves are temperature actuated, self powered, and applicable to cooling processes using water or other fluids. 56-T Series valves are available in eight different sizes. ...

DN: 2 in

... Caps, Valves and Ancillary Fittings. Ezi-Dock™ products can be supplied in HDPE and with Viton O Rings in order to be compatible with certain chemical compounds or products that require a high-temperature fill. The ...

DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C

Execution: metal seat inside stem (non-rising) non-rising handwheel Materials: body and bonnet: GJL-250 body- and wedge seats: 1.4307 stem: 1.4006 Flange connection: / Face-to-face: DIN EN 1092-2 Form B Face-to-face DIN ...

DN: 0.25 in
Pressure: 414 bar
Temperature: -40 °C - 93 °C

316 SS, BF Series Ball Valve, CNG fast-fill, PEEK Seats, 1/4 Female NPT, 6000psig(414bar), -40°F to 200°F(-40°C to 93°C), 0.75 Cv, 3-way, 90° actuation, Low-temperature Service Body Material316 Stainless Steel Port ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness.

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C

DN: 16 mm
Pressure: 0 mbar

Category - Angle valve, manual, KF, aluminium Actuation - manual via hand wheel Item description - KF Angle Valve, DN16 manually operated materials: - body aluminium - valve plate, ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal ...

DN: 50 mm - 500 mm
Pressure: 0.1 bar - 1.5 bar
Temperature: -25 °C - 80 °C

The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids, or as a locking valve in pipelines for gases. • Dust-proof, pressure-tight, vacuum-tight ...

DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi

• Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction (ASTM B584) • Integral ...

DN: 15 mm - 800 mm
Pressure: 1.6 MPa - 25 MPa

... is good 　　◎It can be used on ring network pipeline whose medium flows towards two directions 　　◎Structure length is short 　　Valve material 　　TA1,TA2,TA10,Gr C-2,Gr C-3,Zr702C,Zr705C,N6,N200,CZ-100,M35-1,N06600,CY40,N12MV,CW12MW,CN7M,4A,6A,HK30,etc. 　　Performance ...