DWYER manual valves

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C

DN: 16 mm
Pressure: 0 mbar

Category - Angle valve, manual, KF, aluminium Actuation - manual via hand wheel Item description - KF Angle Valve, DN16 manually operated materials: ...

DN: 25 mm - 250 mm
Pressure: 16 bar
Temperature: -40 °C - 196 °C

... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide ...

DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi

• Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction (ASTM B584) • Integral ...

DN: 15 mm - 800 mm
Pressure: 1.6 MPa - 25 MPa

... is good 　　◎It can be used on ring network pipeline whose medium flows towards two directions 　　◎Structure length is short 　　Valve material 　　TA1,TA2,TA10,Gr C-2,Gr C-3,Zr702C,Zr705C,N6,N200,CZ-100,M35-1,N06600,CY40,N12MV,CW12MW,CN7M,4A,6A,HK30,etc. 　　Performance ...

DN: 50 mm - 1,200 mm
Pressure: 1.6 MPa - 160 MPa
Temperature: -46 °C - 600 °C

GB Gâte Valve is suitable for the nominal pressure (CL150-CL2500),, chemical, thermal power plant and other conditions of the pipeline, eut off or connect the pipeline medium. Main material: carbon Steel, stainless ...

Pressure: 250 bar
Temperature: -30 °C - 120 °C
Flow rate: 42 l/min

... be locked in place. · Positive shut-off Operation The valve varies flow restriction by adjusting needle in or out and will shut off when fully closed. These Valves will meter flow ...

DN: 0.5 in - 36 in

... side-entry ball valve is the most common and popular design. Given its great modularity, SRi can manufacture any side-entry ball valves with special options. In case of maintenance operation, all ...

FEATURES: -Unique sealing arrangement for extended life of valve. -Heat resistance hand wheel. -Wear and erosion resistance for most of the fluids. -Class VI leakage valve. -Use ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

Pressure: 0 bar - 7 bar

... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...

DN: 15 mm - 200 mm
Pressure: 16, 25, 40, 64 bar
Temperature: -196 °C - 450 °C

Electric Actuated Globe Control Valve Body: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Bonnet: Cast Steel, Cast Iron, Ductile Iron, SS304, SS316, SS316L Lining Material: PO, PE, PP F46, F4, PFA Bellows ...

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...

DN: 15 mm - 200 mm
Pressure: 5.5 bar - 76 bar
Temperature: 38 °C

... Piston Valve (PPV) is a linear movement valve in which a stainless-steel piston travels between the upper and lower seal ring. These rings are separated by a lantern bushing, which supports the piston ...

DN: 0.375, 0.5, 0.18, 0.25, 0.75 in
Pressure: 0 psi - 20,000 psi
Temperature: -26 °C - 204 °C

NPT Connections with MAWP up to 15,000 PSI (1034 bar) Flow Pattern: 2-Way, 3-Way Switching, 3-Way Diverting Features Bidirectional trunnion style for optimal performance Three standard mounting options Options ...

... maintenance. Inline check valve/swivels are used at the inlet ports to provide backflow protection as well as freedom of movement. A wide range of peripheral items are available to enhance the operation of our valves, ...

DN: 15 mm - 350 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 650 °C

HIGH PERFORMANCE METAL SEATED BALL VALVES 1/2"-14" ANSI 150-900 Materials: 1.4408/CF8M, 1.0619/WCB, 1.4404/316L, 1.4308/CF8, 1.4571/316Ti, Duplex, Hastelloy, Monel Live load state of the art sealing system Floating ...

DN: 10 mm - 50 mm
Pressure: 10 bar - 30 bar
Temperature: -10 °C - 120 °C

Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” à 3/4” = 30 Bar - 1” = 16 Bar - 1”1/4 à 2” = 10 Bar Temperature = -10°C +120°C

SPECIFICATION PORT SIZE(PT,NPT): 1/4" ADJ.PRESSURE RANGE(kgf/cm2): 0.5~35 PROOF PRESSURE(kgf/cm2): 40 AMBIENT TEMP: 5-60 C GAUGE PORT(PT, NPT): 1/8"

Pressure: 250 bar
Temperature: -20 °C - 100 °C
Flow rate: 180 l/min

Monoblock and sandwich designs All types of circuit diagrams Integrated relief valves and optional flow regulator Max. flow rate 180 l/min Max. working pressure 250 bar

DN: 0.125 mm

This flow control valve is provided for repeatable oil flow control in one direction. This valve prevents damages to the system caused by high flow rates. It was made with a lockable adjustment knob.

DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C

... +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN 1092 PN 16.

DN: 0.125 in - 0.75 in
Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C

1. The direction-change turns lightly with good hand feeling and exact orientation. 2. Large effective circulating area leads to little pressure loss. 3. Panel and body installation are optional. The panel installation ...

DN: 15 mm - 150 mm

... Anti-Static Device and Live-Loaded Packing Fugitive Emissions ISO 15848 Wide Range of Soft Seat and Metal Seat Options Manual, Electric, Pneumatic, or Electro-Hydraulic Operators Available Custom Face-to-Face Lengths ...

Pressure: 0 Torr - 760 Torr
Temperature: 0 °C - 150 °C

... removed from the body without requiring removal of the valve from the system. Please contact us for options such as roughing ports or valves that remain open in the event of power failure. Manual ...