The Flow Block® allows the interception of steel pipes, ductile iron, cast iron and stainless steel from DN 3/4” up to DN 2" with interruption of service, the system is used in the following industries: > Gas > Water > District Heating > ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 2 mm - 8 mm
Pressure: 1,400 bar
Temperature: -20 °C - 80 °C
... avoid contamination. Specific selection of metallic materials to avoid hydrogen embrittlement. Special hard treatments for Valve stem Leakage test on seat and packing with nitrogen at maximum operating pressure.
on/off valve body for FLOW waterjet cutting machine series number is 010104-1
The SCAT air valve blocks harmful vapours and ensures safe pressure equalisation in the storage tanks of your HPLC. Solvent mixtures remain stable: thanks to closed system without evaporation. The filter membrane keeps ...
The SCAT air valve blocks harmful vapours and ensures safe pressure equalisation in the storage tanks of your HPLC. Solvent mixtures remain stable: thanks to closed system without evaporation. The filter membrane keeps ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made ...
DN: 0.25 in - 3.125 in
Pressure: 700 psi
Temperature: -40 °F - 300 °F
... Sporlan Ball Valve is a welded body joint that is factory tested to ensure positive leak-free performance. Dual Teflon seals surrounds the polished, brass ball to prevent leakages. There is an internal relief port design ...
Temperature: 500, 1,000 °F
... firing systems. Stock Knife Gate Valves (KGV) are specially constructed valves designed for extreme service. This ability to isolate portions of the burner line allows routine maintenance to be performed ...
DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar
Temperature: -40 °C - 200 °C
... Butterfly Valve for Control, Throttling and Shut-off Duties GAR-SEAL® valves are used extensively where corrosive, abrasive, and toxic media need to be reliably controlled. They are ...
DN: 8 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -40 °C - 175 °C
... Unique DV-ST UltraPure diaphragm valves are the natural choice for pharma and biotech industries as well as other hygiene-focused processes. The compact and lightweight valves comprise a series of base ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C
... expertise in fluoropolymer valves have allowed us to provide you with an entrapment free, full flow-through component. These high-purity valves are available in numerous configuration alternatives in ...
DN: 8, 14, 10 mm
Pressure: 0 bar - 0 bar
1/4 TURN ISOLATING VALVE 2/2 MALE-FEMALE G1/2" D - 29 KV - 5.4 i - 10 Plage de pression (bar) - 0 / 10 Raccord Cote Circuit - 1/2" Ø Nominal - 10
... Polymer Valves are suitable for various applications and are an excellent fit for any polymer processing line. BKG® HyFlex™ Shut-Off Valves The BKG® HyFlex™ Shut-Off ...
DN: 32 mm - 63 mm
Pressure: 16 bar
Temperature: -10 °C - 45 °C
Ball valve KHW for water Gasket: EPDM 1/4 turns for opening and closing DVGW test mark: DW-6210CQ0059 Note: For this purpose, there is a suitable actuating linkage KBS for wrench Areas of Application The ...
DN: 0.5 in - 2 in
... performance at a great price. All of our valves are easily installed and simple to use. When paired with our valve actuators, they're the perfect solution for fully automated operation. FEATURES All ...
DN: 0.25 in
Pressure: 5,000 psi
High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off ...
... coupling, based on a double ball valve system integrating a sophisticated safety design. Beyond the common advantages of a ball valve design, Epsilon provides for product flow through an unrestricted ...
DN: 0.5, 1, 1.5, 1.8 m
Temperature: 150, 180 °C
... injection valve ensures straightforward isolation of the mould cavity and vacuum tight sealing, ensuring reliable and clean operation • Careful positioning of the material port allows use in deep mould structures ...
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -20 °C - 60 °C
Flange ball valves PS 16 bar Accreditations: Pressure Equitment Directive 2014/68/EU DVGW-G (DIN 3386) for manual shutting off gas accordance with DVGW code of practice G 260, air and water, PS max. 16 bar HTB ...
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 70 °C
Shut off valve • Temperature class: T30/T50 • Protection сlass: IP68 • Communication with associated water meter: Bluetooth • Indication: LED to reflect valve states • Battery: Lithium ...
DN: 20 mm - 63 mm
Pressure: 16 bar
Temperature: -35 °C - 120 °C
EQOfluids FR
DN: 25, 15, 20 mm
... platform with lever for manual shutoff Bonomi Industries shutoff valve Water shut-off in 5 seconds WaterStop is equipped with a powerful actuator of up to 8.5 N•m ...
NEXUS WIRELESS VALVES – Connecting your isolated valves back to the controller, Wirelessly! This product family can provide many solutions from connecting isolated valves to changing ...
DN: 20, 25, 32 mm
Flow rate: 4 m³/h - 21 m³/h
... three-way/two-way zone valve ZV is designed for controlling the output of water heat exchangers. Technical Specifications Cylindrical shut-off allows stopping the flow regardless of pressure Option ...
2VV s.r.o.
Temperature: 300 °C
... industrial valves/flaps/dampers. MECHANICAL, PNEUMATIC OR ELECTRIC VALVE CONTROL In the case of smaller nominal widths, the valve blade is normally controlled with a ...
Valve parts made by lost wax casting and machining. Our company produces valve parts for Butterfly valve, Stop valve, Solenoid valve, ...
Please specify:
Help us improve:
remaining