- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Flow meter >
- Environnement S.A
Environnement S.A flow meters
Derivative of our proven Production Line Flow Meter Built-in automatic pressure control Direct correlation to harmonised standards Product specific parameters for optimum test set-up Case and combustion ...
Furness Controls
Volumetric flow rate: 0 l/min - 20,000 l/min
... FCO752 is quite possibly the most flexible, reliable, and diverse flow meter available today. Air and gas flows from 0.01 ml/min to 10,000 l/min Using Furness Controls Laminar flow ...
Furness Controls
Volumetric flow rate: 0 l/min - 10,000 l/min
Precision: 1 %
... few. The FCO732 is one of the most flexible, reliable and diverse flow meters on the market. Excellent accuracy of <±1% Reading Using the well proven Furness Controls laminar flow ...
Furness Controls
Process temperature: -20 °C - 80 °C
AFM-3 Flow Meter Specifications Usage:For testing liquid flow rate, Commonly used in smart toilets, drinkingfountains, etc. Parameters - AFM-3 Rated voltage - 5 VDC Rated ...
ALLDOO Micropump | Micro Diaphragm Pumps
Process temperature: 20 °C
... LED blinks when flow is measured and hence optically displays correct operation of the cooling system. These LEDs not only serve the functional purpose but additionally look great! Product Information The FlowMeter ...
ALLDOO Micropump | Micro Diaphragm Pumps
Process temperature: 120 °C
1/2 inch DN15 Transparent Water Flow Meter Flow MeterHall Flow Sensor Indicator Counter Specification: Appearance: clear product identification,accurate ...
ALLDOO Micropump | Micro Diaphragm Pumps
... cone, whereas for the Venturi nozzle, the inlet contour matches that of the ISA 1932 flow nozzle. The major advantage of the Venturi over orifice plates and flow nozzles is in the area of pressure ...
Process temperature: -35 °C - 60 °C
Precision: 1 %
Repeatibility: 0.1 %
... Low power consumption enables operation using solar cells - Recognition of flow direction - Measuring range from +/- 0.10 to +/- 15 m/s (depending on the flow conditions) - Recognition ...
SOMMER Messtechnik GmbH
Process temperature: -20 °C - 60 °C
Precision: 1 %
... TRANSMISSION IN COMPACT Housing The RQ-30 ADMS is an all-in-one discharge measurement System. It contains the non-contact flow velocity and water level sensors of the RQ- 30 and applies the same algorithms and model ...
SOMMER Messtechnik GmbH
Process temperature: -35 °C - 60 °C
Precision: 1 %
Repeatibility: 0.1 %
... depending on the flow conditions) - Analogue outputs from 4 to 20 mA (optional) Fields of application The main advantage of the RQ-30d is that the discharge can be measured more precisely, especially in rivers ...
SOMMER Messtechnik GmbH
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 156.3 ft³/min
Repeatibility: 0.1 %
... depending on your process. The CentriFlow® Type I Meter, just as all CentriFlow® brand meters, is a mass flow meter designed for measuring bulk solids continuously ...
Eastern Instruments
Mass flow rate: 100 lb/h - 500,000 lb/h
Volumetric flow rate: 1.7 ft³/min - 120 ft³/min
Repeatibility: 0.1 %
The CentriFlow BWS meter is a gravimetric solids flow meter that will accurately measure the flow of product that continuously passes through it. Due to its simple, ...
Eastern Instruments
... duct runs (upstream or downstream). They provide flow conditioning and accurate air flow measurement, regardless of placement and duct obstructions, as they combine flow-straightening ...
Eastern Instruments
Process temperature: -20 °C - 180 °C
Process pressure: 250 bar
Precision: 0.15 %
... The flow meter consists of a sensor and a corresponding measuring transducer. They are available both in separate and in compact designs. Area of application: The key applications for the mag-flux ...
MECON
Volumetric flow rate: 0.9 m³/h - 6,627 m³/h
... ultrasonic level transmitter - Level transmitter can be used for all flume types - Displaying of flow measurement and average or total flow - Certification of measurement Applications - ...
Volumetric flow rate: 5.3 l/min - 524 l/min
Process temperature: -25 °C - 100 °C
Process pressure: 0 bar - 10 bar
... optional). Probe material: stainless steel. Working temperature range up to +100 °C. Suitable for fixed measuring of flow rate V/t [m³/h, l/min] in clean gases, briefly also in particle-laden mediums. Signal ...
Höntzsch GmbH & Co KG
The B-Alert is a flow rate indicator and totalizer with continuous flow rate monitoring feature. It offers the facility to set one low flow rate and one high flow rate alarm value. The display shows flow ...
Process temperature: 100, 60, 20 °C
Process pressure: 1,013 mbar
... Standard, which has a flow tube length of 138mm, universal standard tube length. -1200 Compact, which has a flow tube length of 93mm, is for use where space is at a premium. The 1200 Series Flowmeter ...
MPB INDUSTRIES
Volumetric flow rate: 0 m³/h - 280.02 m³/h
IZMAG Electromagnetic Flow Meter : "IZMAG" provides accurate measurement of all electrically conductive liquids. Unrestricted flow tube design provides no constraints on process ...
Anderson Instrument
Volumetric flow rate: 30 l/h - 1,200 l/h
Process temperature: -20 °C - 90 °C
Process pressure: 16 bar - 750 bar
The PSF80x low-cost flow sensor, offered by COMECO, is manufactured by SWISSFLOW. The patented Swissflow technology is the basis for the highgrade liquid flow meters. The rotor housing ...
Comeco Control & Measurement
Process temperature: -20 °C - 60 °C
Process pressure: 10,000 Pa
APPLICATION One instrument for measurement of pressure, air flow, temperature and relative humidity Is tested to comply with standards for ’Ventilation for buildings – test procedures & measuring methods for handing ...
... service condition. Unlike most flow meters, including Coriolis and other Positive Displacement Flowmeters, VAF Instruments liquid Flowmeters have a superior customized range-ability. ...
Volumetric flow rate: 21 l/min - 200 l/min
Process temperature: 0 °C - 100 °C
... triggered by this micro-switch. Furthermore, a display system is activated that shows the current flow quantity on the scale. Display of the current flow simple adjustment of the switching ...
Product Description Airflow meter for extruders Art.-Nr. 01023
Process temperature: -25 °C - 60 °C
Process pressure: 0.6, 1, 1.6 MPa
... pressure loss caused by flow detection, and the energy saving effect is good; * The measured volume flow is actually not significantly affected by changes in fluid density, viscosity, temperature, ...
Process temperature: -40 °C - 350 °C
Process pressure: 4, 2.5, 1, 0.6 MPa
Vortex flowmeter is a volume flowmeter that measures the volume flow of gas, steam or liquid, the volume flow of standard conditions or mass flow according ...
Process pressure: 10, 6.3, 2.5, 1.6 MPa
The intelligent turbine flowmeter is a new type of intelligent instrument that integrates the turbine flow sensor and the display totalizer, which is developed by using advanced ultra-low power consumption ...
Volumetric flow rate: 0.2 m³/h - 75 m³/h
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 16 bar
Mounting position: Arbitrary Mounting type: Line fitting Supply voltage: 18 – 30 V DC Accuracy: ISO 8573-1: class 141: ± (3 % MW + 0,3 % MEW) / ISO 8573-1: class 344: ± (6 % MW + 0,6 % MEW) Max. operating pressure: ...
Process temperature: -40 °C - 160 °C
Precision: 1 %
Series DUS-TT-F wall-mount Clamp-on Transit Time Ultrasonic Flow Meters provide abundant capabilities for accurate liquid flow measurement from outside of a pipe. It utilizes state-of-the-art ...
Prisma Instruments
Process temperature: -25 °C - 60 °C
Precision: 1 %
Repeatibility: 0.2 %
Series DUS-TT-PC wall-mount Clamp-on Transit Time Ultrasonic Flow Meters provide abundant capabilities for accurate liquid flow measurement from outside of a pipe. It utilizes state-of-the-art ...
Prisma Instruments
Volumetric flow rate: 2.5 m³/h - 1,000 m³/h
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 16 bar
No straight length needed, installation all angles No alteration of the accuracy minimum starting flow = 1/3 of the traditional water meter Water temperature detection, low temperature alarm No moving ...
Prisma Instruments
Process temperature: 0 °C - 250 °C
Precision: 2 %
The DOPPLER flowmeters are designed to measure the volumetric flow in closed and full pipes. It consists of two sensors an emitter and an ultrasonic receiver. The emitted waves are transmitted by the ...
Sensotec Instruments
Process temperature: -10 °C - 80 °C
Precision: 1 %
Repeatibility: 0.2 %
Non-intrusive flowmeter for transit time for measurement of clean liquids. Electroinica mural with power to 220 Vac or 10/30 Vdc. Available with three types of sensors A (for pipes of 20 to 100 m), B (for pipes of 60 ...
Sensotec Instruments
Process temperature: 50 °C
High performance fixed installation Area Velocity flowmeter with extended features for open channel, part-filled pipe and river application. Dimensions: 166x161 x103 mm; Wall mounting ABS enclosure; Protection class: ...
Sensotec Instruments
Mass flow rate: 24 kg/h - 48,000 kg/h
Process temperature: -40 °C - 130 °C
Precision: 0.2 %
... mass flow meters are your go-to general-purpose mass flow meter. An affordable Coriolis mass flowmeter you can rely on Achieve robust, reliable mass ...
Process temperature: 15 °C - 45 °C
Process pressure: 2.4 bar - 4.12 bar
D700uF(Micro Flow) is designed for ≤ 5SCCM flow application. ≤ 5SCCM flow control has been very critical in high aspect ratio process. Specialized components and newly ...
HORIBA STEC
Process temperature: -10 °C - 60 °C
Process pressure: -0.1 MPa - 5.25 MPa
Precision: 0.5 %
... while checking the measured value. ・Visualization of settings ・NPN/PNP switch function ・Input range selection (for pressure/flow rate) ・Simple 3-step setting
SMC PNEUMATIC
The DLM is a compact in-line measurement system for the continuous recording of bulk solid streams using non-impact force measurement. The material stream is “gently” deflected via an in-line measuring chute. The system ...
Schenck Process Holding GmbH
Process pressure: 2 MPa
... low activity, classified as exempted category by IAEA, combined with the venturi flow measurement technology to measure individual phase flow rate in a three-phase flow. Oil, gas and ...
Haimo Technologies Group Corp.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining