- Hydraulics - Pneumatics >
- Valve >
- Stainless steel valve >
- FESTO
FESTO stainless steel valves
DN: 40 mm - 150 mm
Pressure: 10 bar
The next generation of mix proof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, the D4 Series ...
APV
DN: 40 mm - 100 mm
Pressure: 73, 145, 116 psi
Temperature: 0 °F - 275 °F
Piggable valves enable you to recover costly products out of product lines. Once the pig is forced through the line, the remaining product film on the inside of the product line can then be removed with much less CIP ...
APV
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 160 °C
... on other valve types to give common look, controls interface, and spare parts across a multi-valve system Ball valves operate by opening to allow flow or closing to shut-off flow ...
APV
DN: 125 mm
Pressure: 16 bar
Temperature: 1 °C - 120 °C
For use in heating, ventilating, air conditioning systems and district heating as a control valve in closed circuits.
Siemens Building Technology HVAC Products
DN: 11, 18, 14 mm
Pressure: 0.4 MPa - 1.6 MPa
Temperature: -20 °C - 60 °C
... cycles (Steam), 5 million cycles (Air) ・Low leakage: 10 cm3/min or less ・Space saving: Height 100 mm ・Body materials: Stainless steel 316L equivalent, Bronze (CAC)
SMC PNEUMATIC
DN: 100 mm - 400 mm
Pressure: 0.2 bar
... in SINT engineering polymer, stainless steelor cast iron, and a pre-stressed elastomeric seal. For food applications a version with stainless steel disc and integral FDA-approved seal ...
WAMGROUP S.p.A
DN: 100 mm - 400 mm
Pressure: 0.2 bar
... over a million units operating worldwide, WAM VFS-type Butterfly Valves for powdery and granular materials represent one of the Group's most industrial products. VFS Butterfly Valves consist of two ...
WAMGROUP S.p.A
DN: 100 mm - 140 mm
Pressure: 2.5 bar
Temperature: -20 °C - 90 °C
... manufactured from die-cast aluminium, a carbon steel or stainless steel disc including shafts, and an elastomer seal. An adjusting lever or pneumatic or electric actuator can be applied ...
WAMGROUP S.p.A
DN: 4 mm - 50 mm
Pressure: 0 bar - 65 bar
Temperature: -20 °C - 150 °C
... Technologies: • - Industrial valves • - Pneumatic actuation • - Electric actuation Technical Characteristics: • - Fluids: Ail fluids • - Materials: nickel-plated brass or 430 stainless Steel, ...
Parker Legris
DN: 15 mm - 50 mm
Pressure: 7, 10, 25 bar
Temperature: -10 °C - 185 °C
... to chemicals. Long service life Easy integration of automation units with ELEMENT Flow-optimised stainless steel valve body with sleeve, clamp or weld connection
BÜRKERT FLUID CONTROL SYSTEMS
DN: 0.375 in - 2.5 in
Pressure: 16 bar
Temperature: 180 °C
Parker's shut-off valves are designed for the safe handling of air, gases and liquids for many hydraulic, pneumatic, instrumentation, refrigeration and aerospace applications. Our valves ensure clean, ...
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA Series Valve: 3 ...
Emerson Automation Solutions - TESCOM
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C
... the diameter of the pipe High flow capacity 2. Pneumatic actuator integrated in the valve Space saving (-60%) and reduced costs compared to an automated valve 3. Piston with chemical nickel plating Lower ...
OMAL Spa
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 200 °C
... which the valve is subjected Greater precision in the alignment of axes due to a unique positioning in the process machining from raw material to finished valve Longer lifetime of the valve Less ...
OMAL Spa
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 200 °C
... Mono-directional version with pressure-relief hole in the ball • Stainless steel lever • For versions in materials different from the standard (body, ball, stem), please contact our sales department. • ...
OMAL Spa
DN: 50 mm - 1,400 mm
Pressure: 25 bar
Temperature: -250 °C - 260 °C
Triple-offset butterfly valve, metal-seated (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of steel or stainless ...
KSB S.A.S. - France
DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C
Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...
DN: 50 mm - 60 mm
Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...
Pressure: 0.5 bar - 250 bar
Temperature: -20 °C - 200 °C
WEH® Screw-in Valve TVR400, stainless steel - Series The screw-in valves of the WEH® TVR400 series are mechanical shut-off valves which allow the media ...
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different ...
Maximator GmbH
DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. ...
Maximator GmbH
DN: 0.125 in - 1 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 180 °C
Airwork’s VRX quick exhaust valves allow the possibility (if mounted on a pneumatic cylinder) to discharge rapidly the pressure contained inside it. Thanks to the material used for their realization (stainless ...
DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C
... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. It is ...
DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C
• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C
• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C
• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive
Kubota Brabender Technologie GmbH
DN: 6 mm - 40 mm
Pressure: 1.5 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 6 mm - 40 mm
Pressure: 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 20 mm - 100 mm
Pressure: 25, 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
... fluctuations as the needle and valve seat are both manufactured from stainless steel. Working Pressure Range: The NV is rated for a maximum inlet pressure of 500 psig. The metal ...
Beswick Engineering Co, Inc.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...
Beswick Engineering Co, Inc.
DN: 0.07, 0.375 in
Pressure: 0 psi - 250 psi
... connection. Approximate Weight: 57g in stainless steel (303 & 316). Weight will vary slightly, depending on configuration. Porting: 10-32 female threaded inlet and outlet ports. Features ...
Beswick Engineering Co, Inc.
DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar
Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been determined or to ...
DN: 0.25 in - 2 in
Pressure: 1,200 psi
Temperature: -60 °F - 450 °F
Part Material Body - CF8M or SUS316 Body Cap - CF8M or SUS316 Bail - CF8M or SUS316 Retainer - CF8M or SUS316 Stem - SUS316 Seat - PTFE+15% GF Seal - PTFE Thrust - PTFE Stem Packing - PTFE Stem Gland - SUS304 Stem Nut - SUS304 Handle ...
Golden Mountain Enterprise
DN: 0.25 in - 2 in
Pressure: 2,000 psi
Handle Gland - Vinyl Plastic - Handle - SUS304 - C.S. Plated Stem - SUS316 - C.S. Plated Handle - SUS304 - Gland - SUS316 - C.S. Plated Packing - Glass Filled PTFE - Thrust Washer - Glass Filled PTFE - Seat - Carbon Fibre Keinf ...
Golden Mountain Enterprise
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer ...
Golden Mountain Enterprise
... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of ...
Leybold
DN: 0.25 in - 0.5 in
Pressure: 7,250 psi
... 100% shell & inline leak tested Marine classification (on demand): DNV GL, LR, BV, ABS, KR, RINA, others Materials Stainless steel body & ends All materials compatible for Hydrogen use
HABONIM
DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C
BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316
BENE INOX
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316
BENE INOX
DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C
1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316
BENE INOX
Pressure: 400 bar
Temperature: -30 °C - 80 °C
... needed. Consider the following advantages: - Made in high quality hard nickel plated steel. 70 times more resistant than zinc plated steel. - Stainless Steel 316L ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining