FIP - Formatura Iniezione Polimeri valves

DN: 10 mm

... evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. The MAC “lifting” configuration is unique, however, in that the valve maintains a ...

Pressure: 0 bar - 400 bar

Sunfab By-Pass / SBP is an unloading valve for the SAP/SCP pump providing remote switching between idling and operation. The By-Pass valve is used in installations where the power take off is not disengaged ...

Pressure: 5 bar

... Rotary Tube Selector Valve diverts pneumatically conveyed powders and granules from one line up to any of sixteen lines. Flow can also be converged from multiple lines into one line. Valve is often used ...

DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C

The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...

DN: 25 mm
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 300 l/min

Series VR5U08 Nominal Size Inch 1" mm 25 Maximum Flow gpm 80 lpm 300 Maximum Pressure psi 5000 bar 350 Mounting Flange

DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C

... Bell & Gossett, assures optimum system flow balance at minimum pump operating horsepower. Valves can simply be pre-set using the B&G Circuit Setter Balance Valve Calculator, curve booklet G10091, or the ...

Pressure: 140 Pa - 840 Pa
Temperature: 1 °C - 42 °C
Flow rate: 4,500, 5,900 l/h

... piston positions. “Totalizer” function tracks total amount of water treated. Audible Cycle Advance Alarm sounds if the valve is stuck in any position for more than 2 minutes. Self-charging capacitor keeps date ...

Pressure: 28,000,000 Pa
Temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 120 l/min

... swing motor LS control + constant horsepower control Good for straight traveling of wheel motors Various kinds of attached valves

Pressure: 207 bar - 700 bar
Flow rate: 3 us gal/min - 8 us gal/min

... or used remotely with hoses Compact 4-way, 3-position valve 3,000 - 4,000 psi (207 - 275 bar) return line ground dump safety valve Controlled advance and built-in hold feature Single-acting valve ...

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

Features •Increased safety •Superior corrosion resistance •Extended lifetime •Lower operating costs Specifications •Design - ISO/DIN •Nominal Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face ...

DN: 0.125 in - 1.25 in
Pressure: 250, 315 bar
Temperature: -15 °C - 70 °C

Cetop 3 (NG6) Flow control Valve with Bypass Check – The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they’re used to ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min

Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds and hydraulic motors requiring constant ...

... scenarios — all with no required feedback for the position of the tensioner rod. That’s because the engineers behind the Olmsted valves provided by Oilgear developed a proprietary means of achieving the majority of the ...

DN: 80 mm - 400 mm
Pressure: 0.5 bar - 16 bar

The BERMAD Model IR-450-60-R Level Control Valve with Modulating Horizontal Float is a hydraulically operated, diaphragm actuated control valve. The valve hydraulically controls reservoir ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 200 °C

RDV rotary disc gate valve The valve plate is driven by the rotating shaft, so that the motion of the valve switch is rotating. The piston rod of the pneumatic actuator does not contact ...

DN: 0.25, 0.5 in
Pressure: 40 bar
Temperature: -40 °C - 100 °C

... powered mass flow meters red-y compact series. Tightly Closing Valves The valves are tight-closing Different Device Setups The valves are available as straight valves ...

DN: 8, 6, 12 mm
Pressure: 0 Pa - 35,000,000 Pa
Temperature: -30 °C - 51 °C

Single conterbalance valves with regenerative function. Flow range from 1 to 160 liters / min. Max calibration pressure 350 bar. Assembly with in-line manifold or CETOP3 flanging, in steel or aluminum material.

DN: 0.375 in

Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)

DN: 13 mm
Pressure: 350 bar

... body ball valves designed for use as on/off devices for hydraulic applications with standard and extended SAE mating flange connectors according to ISO 6162-1, 6162-2 and SAE J 518 C. Ball Valve Mild ...

K-Tron Aeropass Valve aim at transferring the material straight on to a Hopper allowing to be used in non-authorized spaces. It consists of an instant switch off material on total filling of Scale Hopper. Aeropass Valve ...

Pressure: 100 psi

Change direction of air-conveyed material The 15 Degree Switch is available in a two-way or three-way type. The full bore design permits unrestricted material flow to minimize material degradation and pressure drop to make conveying ...

DN: 30, 25, 18 mm
Pressure: 6 bar - 420 bar
Temperature: -20 °C - 90 °C

... various manifold valve plate configurations Design characteristics directional control valves available as sub plate mounted valves nominal sizes 18, 25 and 30 ...