FIP - Formatura Iniezione Polimeri valves

DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C

TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out proof stem6. Viton ...

DN: 2 in - 10 in
Pressure: 250, 500, 150 psi
Temperature: -30 °F - 200 °F

TECVAL model VRLP Pressure Reducing Valve, reduces upstream pressure to a predetermined pressure set downstream in spite of changes in flow or upstream pressure. Devices in ductile iron ASTM A536 flanged according to ...

DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C

Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks to its stability, ...

Pressure: 0 mbar - 1,000 mbar

Rectangular Transfer valves HTC vacuum rectangular transfer valves use directly actuating technology. Valve body is appropriate size and compact design. All moving parts are located ...

DN: 100 mm - 400 mm

Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive.

DN: 1, 0.375, 0.5, 0.25 in

iPolymer Water Valve (WV) is manufactured in three material choices: PVC, Polypropylene, or PVDF. The valve has a spring return and is pneumatically actuated to open or close depending upon the model. ...

DN: 15 mm - 100 mm
Pressure: 150, 250 psi
Temperature: 70 °F

... ball valves which has O-rings that are constructed with FPM or EPDM while its seats are made from PTFE. It is available in PVC and Corzan CPVC versions. Its socket has a maximum size of 2 inches with threaded end ...

DN: 15, 20 mm
Pressure: 51 bar
Temperature: 425 °C

... accompanied by a Isolation valve for isolation to maintain/repair the trap and a Bypass valve to let out the condensate uninterrupted while the trap is being maintained. This was available in the form ...

DN: 0.25 in
Pressure: 1.4 bar - 7 bar
Temperature: -20 °C - 70 °C

Lock Up Valve, YT-405 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting level to avoid system shutdown or damages to pipelines. - Due to its compact size and light weight, ...

DN: 20 mm - 100 mm
Pressure: -1 bar - 10 bar
Temperature: -80 °C - 200 °C

... Aseptic Sampling Valve is designed to be installed in tanks and reactors. It can also be used for food preparation and pharmaceutical operations. This device ensures absolute drainability without dead leg. The VA-VFA ...

DN: 150 mm - 300 mm

The Pharmalite is an eccentric butterfly valve designed for various industrial application. It is created out of stainless steel EN 1.4404 with 0.5 microns inner and 1.2 mm outside dimensions. Its inflatable gasket can ...

DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C

DeZURIK Eccentric Plug Valves' design features include eccentric action and resilient plug facings assure lasting dead-tight shutoff. Clean interior design and straight-through flow allow high maximum flow capacity with ...

DN: 0.25 in - 0.5 in
Pressure: 10.3 bar
Temperature: 165 °C

Type Biopure Material Bonnet: 316 Stainless Steel Handwheel: Polyethersulfone (PES) Bio-Pure is the compact solution for the most demanding applications in the biopharmaceutical industry. Due to its standardized sizes and a wide range ...

DN: 10 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 110 °C

... control valve with ceramic technology and integrated ultrasonic flow measurement, temperature measurement and pressure measurement and integrated PID control. Features Integrated Temperature Sensor Integrated Pressure ...

DN: 15 mm - 300 mm

Lined 2 piece designed cast body and flange with stainless steel cast ball/stem. F to F as per ASA 150 class & DIN standard. Flange drilling as per customers requirement Lining Materials Lined with Body: - SHELL : DI/WCB/S.S. CASTING LINING ...

DN: 150 mm - 400 mm
Pressure: 50, 25 bar

INTER-TECH valve is equipped with métal to métal sealing, for severe applications where a plastomer seat is not viable. TECHNOLOGY Plate standardisée) in accordance with EN-ISO 5211 Adjustable stuffing box Graphite ...

DN: 50 mm - 300 mm
Pressure: 10 bar

Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -60 °C - 200 °C

One piece ball/stem full bore system for superior performance Lining options for abrasive applications PVDF and UHMW-PE Maintenance-free and adjustable gas-tight stuffing box packing Face to face dimensions - DIN EN ...

DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C

... bottom stand with an insert hole, DIAPHRAGM VALVE TYPE 14 helps support the piping. The valve is also provided with a flange stand to increase installation safety. Built-in Travel Stop(15-50mm) DIAPHRAGM ...

DN: 15 mm - 300 mm
Pressure: 16 bar - 100 bar

... Stem multi-stage sealing, valve seat elastic sealing design Safe and reliable Valve stem blowout prevention, fireproof, explosion-proof, anti-static and other functions design The torque is light ...

DN: 150 mm - 1,500 mm
Pressure: 0.2 bar - 3 bar
Temperature: 200 °C

Max Leakage Class III (FCI 70-2) End Connections: Wafer, Flanged Material: Carbon Steel, AISI 304, AISI316 General Characteristics - ON/OFF or MODULATING Service or according to Customer Drawing - Outside Bearing - Tightness ...

DN: 1 in - 6 in
Pressure: 10, 19 psi
Temperature: 100 °C

... widely adopted by our clients who can see the benefits this valve can bring. The valve has all of the high quality features you’d expect from the world’s leading manufacturer of PFA lined valves, ...

DN: 0.5 in - 24 in

Gate Valves serve as efficient stop valves with flow in either direction. They are commonly used when minimum pressure drop is important. Throttling is not recommended because partially open gate valve ...