FIP - Formatura Iniezione Polimeri valves

DN: 50 mm - 400 mm
Pressure: 1 bar
Temperature: 80 °C

... industry standard. It was the first valve specifically designed for handling dry bulk solid materials, and is “the original” orifice gate valve. Purpose: Prior to the Orifice Gate, conventional knife ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating ...

DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C

Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated

DN: 1.25 in

... maintains a secure sealing during the tapping saddles lifetime Quick and easy to install Can be delivered with different valves and pipe thread solutions

DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C

General purpose valve with an EPDM liner, offering a long life with low maintenance. Self-lubricating bearings ensure perfect guiding and turning of the shaft without seizure or premature wear. These valves ...

DN: 40 mm - 300 mm
Pressure: 1.5 bar - 12 bar
Temperature: 40 °C

The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...

DN: 0.5 in - 4 in

- PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded

DN: 50, 63 mm
Pressure: 10 bar - 30 bar
Temperature: -20 °C - 65 °C

... Pilot-operated Valves for Start Valves Pilot-operated Valves for air starters Main Start Valves with or without Slow-turn Control Valves ...

DN: 0.25 in
Temperature: -20 °C - 70 °C

Dependable safety valve to retain a set supply air pressure and guarantee a steady process control when a supply air is suddenly failed by accident and its pressure becomes lower than a set pressure Features - Rugged ...

DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with ...

DN: 15, 22 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 130 °C

Fixed orifice DZR brass double regulating valveDiameters from DN015 - ½" to DN050 - 2"Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)Olive & nut kit (O/N) for European copper tubing (EN1057) on request: ● DN015, kit for ...

DN: 40 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C

We Provide Forged One-Piece Ball Valves, Forged Steel 1-Piece Ball Valves, 1-1/2 Inch, DN40, Class 150 LB, PN20, API 6D. Design Standard: API 6D. Face to Face: ASME B16.10. Test and Inspection: API 598.

DN: 15 mm - 125 mm

Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, ...

Pressure: 400 bar

SCHROEDER automatic recirculation valves (ARC) for minimum flow to protect centrifugal pumps. To ensure minimum flow through the pump during operation at low flows. Also called minimum flow valves, ...

DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C

... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...

The range of applications for dosing valves are mainly in the extrusion area. With this specific valve different additives and auxiliary materials can be purposefully inoculated into the plastic at a ...

DN: 0.25 in - 2.5 in
Pressure: 25 bar - 63 bar
Temperature: -20 °C - 150 °C

The Siral V2000 is a brass ball valve which features its capacity to make a full flow stream in conveying general steam of water, air, vacuum oils and non-corrosive liquids. It comes with a nominal pressure of PN 25 to ...

DN: 15 mm - 200 mm
Pressure: 40 bar

Bolted yoke bonnet. • Rising stem and handwheel. • Stainless steel or PTFE sealings. • Distance between sides according to DIN 3202 F-1.

DN: 32 mm - 600 mm
Pressure: 16, 25 bar
Temperature: 70 °C

... Stainless steel spindle with rolled thread and bearing. Total sufrace rubbered wedge with replaceable spindle nut. Gate valve with full bore. All parts are protected against corrosion. Certificate CE Hygienic ...

DN: 15 mm - 300 mm
Pressure: 10 bar
Temperature: -40 °C - 120 °C

Channel: Straight Through Type Structure: Fixed Ball Valve Function: Bypass-Valve Transport Package: Carton/Plywood Box Temperature: Normal Temperature Trademark: BAODI

DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C

... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure of the sealing ...

DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C

Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C

One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...

DN: 100 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 80, 400, 250 °C

Variable working- or emergency slide gate, which is suitable for discharge and dosing of dusty to medium grained bulk material. Product inquiry Dimensional sheet MATERIAL HOUSING :Cast iron, cast aluminium, cast stainless steel ...