- Hydraulics - Pneumatics >
- Valve >
- Valve >
- FIP - Formatura Iniezione Polimeri
FIP - Formatura Iniezione Polimeri valves
DN: 0.25 in - 2 in
Pressure: 1,200 psi
Temperature: -60 °F - 450 °F
Part Material Body - CF8M or SUS316 Body Cap - CF8M or SUS316 Bail - CF8M or SUS316 Retainer - CF8M or SUS316 Stem - SUS316 Seat - PTFE+15% GF Seal - PTFE Thrust - PTFE Stem Packing - PTFE Stem Gland - SUS304 Stem Nut - SUS304 Handle ...
Golden Mountain Enterprise
DN: 0.25 in - 2 in
Pressure: 2,000 psi
Handle Gland - Vinyl Plastic - Handle - SUS304 - C.S. Plated Stem - SUS316 - C.S. Plated Handle - SUS304 - Gland - SUS316 - C.S. Plated Packing - Glass Filled PTFE - Thrust Washer - Glass Filled PTFE - Seat - Carbon Fibre Keinf ...
Golden Mountain Enterprise
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer ...
Golden Mountain Enterprise
... diaphragm pressure regulator MR or the electronic pressure control system C MOVE which in connection with the electronic control valve Move 1250 or Move X controls the gas flow at a individual configured pressure.
Leybold
DN: 2 in - 12 in
... available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves ...
HABONIM
DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C
BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316
BENE INOX
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316
BENE INOX
DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C
1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316
BENE INOX
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...
Aalborg Instruments
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...
Aalborg Instruments
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °C - 66 °C
The VT PTFE is a needle valve that consists of external components which are non-fluid and made from anodized aluminium. It is available in three overlapping flow ranges and made from PCTFE and PTFE components. It has ...
Aalborg Instruments
DN: 0.25 in - 0.75 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 70 °C
ANVER’s two-way ball valves are compact and easy to use. Activated manually for basic on/off pressure control or vacuum applications, these durable ball valves provide a tight connection for optimal stop/flow ...
ANVER Vacuum System Specialists
DN: 0.375 in - 1 in
Pressure: 0 psi - 250 psi
Temperature: -18 °C - 121 °C
... release • Forged body design, extends the life of the ball valve • Optimum flow design. • Blow-out proof stem • Locking handle for added safety • More economical and compact than 3-way valves • ...
ANVER Vacuum System Specialists
DN: 0.125 in - 0.5 in
Pressure: 0 psi - 150 psi
Temperature: -18 °C - 70 °C
ANVER Slide Valves are manually controlled, 3-way functioning valves that vent the downstream vacuum or pressure when the valve is turned to the OFF position. This provides a simple, ...
ANVER Vacuum System Specialists
DN: 0.25 in
Pressure: 0 bar - 400 bar
Flow rate: 8, 4, 2 l/min
Valve is controlled by compressed air acting on piston in the cylinder. Valve is kept open by the spring force. When pilot pressure is applied the valve closes. When pilot fluid is ...
DN: 8 mm - 150 mm
Pressure: 125 bar
Ball valve for food applications according to regulation EU1935/2004, EG 10/2011 and FDA. Three-piece body, pressure rating depending on nominal size up to PN125, ball floating, vacuum-tight. Bore Full and reduced bore Special ...
GEFA Processtechnik
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...
SISTO Armaturen S.A.
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle ...
SISTO Armaturen S.A.
... components in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated ...
SISTO Armaturen S.A.
DN: 40 mm - 100 mm
Pressure: 73, 145, 87, 116 psi
Temperature: 275, 284 °F
Valves / Mixproof Valves The DT4 tank outlet mixproof valve is used for the reliable separation between the tank and servicing pipeline. The DT4 tank outlet is an extension to ...
Waukesha Cherry-Burrell
DN: 1.5 in - 6 in
Pressure: 5 bar
Temperature: 135, 140 °C
The next generation of mixproof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, the D4 Series ...
Waukesha Cherry-Burrell
DN: 38 mm - 152 mm
Pressure: 10, 6 bar
The W72RS Series Mix Proof Valve features a lower radial seal for minimal spillage of products when opening or closing. Specifications Materials Product Wetted: ASTM 316L (UNS-S31603); (DIN-1.4404) Non-Product: ...
Waukesha Cherry-Burrell
The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type such as on-off controlled electric ...
SMS-TORK
Pressure: 16, 40 bar
Temperature: -20 °C - 160 °C
... and is connected to valve as per ISO5211 connections and flange connections are F03/F05/F07. It has a working temperature of 20-160 degrees C, working pressures of PN 40 bar (1/2"...11/4") and 16 bar (11/2"...3") ...
SMS-TORK
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 130 °C
... T-EAV800 electric actuated butterfly valves is a series of valves that works on different mediums: water,hot water, air, aggressive fluid, food industry, gas, oil and steam among others. The TORK wafer ...
SMS-TORK
DN: 50.8, 76.2, 127, 38.1 mm
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited ...
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...
AIGNEP
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
Temperature: 37 °C - 41 °C
Model SP157A is a scald protection bleed valve. Recommended for high ambient temperature locations where extreme heat or hot sun might cause internal water overheating. Flushes water through line when internal water temperature ...
Haws AG - Headquarters for Europe, Middle East and
DN: 32, 25, 63, 40, 20 mm
OMI Officine Meccaniche Industriali
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
Features of Double Acting Angle Seat Valve Can Be Easily Converted From Nc To No and From double Acting To Single Acting. Operator Having Threaded Ports Is Ideally Suited For Area In Which Contamination Due To Exhaust ...
Rotex Automation Limited
DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...
Rotex Automation Limited
Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C
For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.
Rotex Automation Limited
Bypass valve with pressure regulator valve, can be utilized in applications where the pump is operating constantly.
BEZARES S.A.
DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min
Circuit selector valve, manual operation maximum pressure
BEZARES S.A.
DN: 0.5, 0.75, 1 in
Pressure: 500, 350, 400 bar
Temperature: -20 °C - 125 °C
Pilling-Up directional control valve single or double acting. From 1 to 7 sections, with relief valve and multiple configuration options.
BEZARES S.A.
DN: 0.25 in - 1 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,200 °F
... Tantalum, and other exotics with various trim sizes for every valve measure and incorporate an exact precise control. It is available in globe, angle, 3-way, sanitary, and cryogenic designs. This valve ...
Badger Meter
DN: 6 mm - 63 mm
Pressure: 350 bar
... provide an extensive range of male and female standard and super Staple-Lock ball valves with swivel females and the cost effective compact fixed female option. Ball valves are supplied with various handle ...
DN: 160 mm - 1,000 mm
Pressure: 1, 0.9 bar
Temperature: -20 °C - 70 °C
Explosion Isolation Flap Valve CARZ - protective system. Explosion Isolation Flap Valve type CARZ is design as explosion pressure resistance equipment, which is able to prevent a transmission of dangerous ...
DN: 0.25, 0.125, 1.5 in
Pressure: 0 bar - 7 bar
... of sampling valves are specially designed for use in beverage manufacturing. With a MicropreSure feature, users may sample and filter water or other products mid-stream. Users may also sample into graduated cylinders ...
DN: 1 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 150 °C
... sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if ...
VALSTEAM ADCA Engineering S.A.
DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 400 °C
... vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others. BDV – Blowdown valves – Manual discharge of strainer screen contents and ...
VALSTEAM ADCA Engineering S.A.
DN: 15, 20 mm
Pressure: 10.2 bar - 40 bar
Temperature: 50, 150, 250, 300 °C
The CDV32 condensate drain valve automatically discharges air and condensate from steam systems during start-up. A compression spring keeps the valve open when the system is not pressurized. As soon as ...
VALSTEAM ADCA Engineering S.A.
Stainless steel butterfly valve, material: S.S.304,S.S.316. We can offer this stainless steel butterfly valve according with SMS, DIN, ISO standard. Competitive price, with fast delivery time, most ...
DN: 4, 10, 8, 6 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...
NIHON PISCO CO., Ltd.
DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow in one direction and unrestricted flow in the opposite by an orifice restrictor. It is best ...
NIHON PISCO CO., Ltd.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining