DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...
ITV
DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C
Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...
MIX S.R.L.
DN: 150 mm - 800 mm
Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...
MIX S.R.L.
DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C
Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...
MIX S.R.L.
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...
Athena Engineering S.r.l.
DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar
... Entry ball valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation:Lever Gear motor/pneumatic actuators product overview:Athena ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...
Athena Engineering S.r.l.
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...
UFLOW AUTOMATION
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...
UFLOW AUTOMATION
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...
UFLOW AUTOMATION
DN: 150, 200, 250 mm
Pressure: 10 bar
The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing, and can work with powder, granules and ground products. Also, the valves ...
COMAV
DN: 150, 200, 250 mm
Pressure: 67 bar
The emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to empty the tank. ...
COMAV
Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...
COMAV
Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C
• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.
Koganei Corporation
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...
InterApp AG
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
VALVE, HIGH VACUUM, PTFE, O-RING, THREE-WAY With two 9mm O.D. sidearms sealed to the barrel at a 90® angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the ...
Synthware glass
DN: 9 mm
... primaryseal on the precision formed tapered seat . For replacement Viton® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at ...
Synthware glass
DN: 1 in
Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)
Unidelta S.p.A.
DN: 0.375 in
Electro-Pneumatically operated pinch valve Low power 1.3W, high pinching force for 3/8" Silicon tube. other on request pharma, analyses, instrumentation
Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, Plastic/rubber industry
ODE
DN: 0.5, 0.125, 0.25, 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 70 °C
Series of slide valves manually operated. In line mounting they work to close the supply and at the same time exhaust the downstream circuit air.
SAF S.R.L.
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
SAF S.R.L.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
SAF S.R.L.
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 turns of precision adjustment, and ...
Pressure: 30 bar - 250 bar
Temperature: 80 °C
Flow rate: 8 l/min
Sequence valve as timer: up to 250 bar, Delay 1-10 s - Absorption of pressure peaks - Delay time adjustable - Large adjustment range - Pressure-independent switching sequences possible - Only one adjustment ...
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...
Thermomegatech
DN: 0.125 in
Pressure: 60, 100 psi
Temperature: -18 °C - 49 °C
Manifold sample valve assures continuously flowing, contemporary samples in conjunction with the Sentry Sample Sequencer 5. The unique manifold design provides flow in two directions from the open valve, ...
Sentry Equipment
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 16 foot valve Viton gaskets. Made in Italy. Fields of application: Fuel - Diesel - Lubricating.
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) ...
Maran e Peracini srl
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The main function of the 2140 shut-off valve is the controlled opening and closing of pipeline sections via the valve seat integrated in the body. Due to the use of high-quality materials, the fitting ...
Goetze KG Armaturen
Pressure: 0 bar - 16 bar
Temperature: 50 °C
Flow rate: 1,570 l/min
The block device is particularly useful during maintenance operations. It prevents the system from being accidentally or wrongly pressurized. It can be wall mounted using the relative holes. Discharge connection: G 1/8”. Maximum inlet ...
Aircomp by Stampotecnica
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. FR1-06-KD ...
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
Hughes Safety Showers
Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
... durable, high pressure 1/2” brass ball float valves (BS1212) pivot to control the flow of water in the tank. Includes a 5 inch plastic float with brass insert. • WRAS approved • Includes x2 ball float valves ...
Hughes Safety Showers
DN: 20 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 100 °C
characteristics ports MK threads G 3/4 - G 1 1/4, FK flanges PN 16/40/100 function NC pressure range 0-16/0-40/0-64/0-100, bar Kv value m³/h 7,4 media gaseous - liquid - highly viscous -, gelatinous - contaminated flow direction ...
Müller co ax GmbH
This valve is used if a plant shutdown is impossible or undesirable for process engineering or commercial reasons. With change-over valves it is possible to switch over between parallel safety valves ...
Seetru Limited
Please specify:
Help us improve:
remaining