Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min
— The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve ...
Duplomatic Oleodinamica
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
... design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance. The “D” to “T” orifices meet API Standard 526 covering orifice areas and ...
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
DPA PROGRESSIVE DIVIDERS LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding to the central piston ...
I.L.C. srl
DN: 9.525 mm
Pressure: 0 bar - 40 bar
Temperature: -20 °C - 80 °C
SINGLE COUNTERBALANCE VALVE FOR OPEN CENTER VBCB OVERCENTER VALVE SIMPLE EFFECT NOT COMPENSATED WITH BANJO BOLT Thanks to the Oleoweb VBCB counterbalance valves it is possible to ...
Oleoweb Srl
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
AVS Römer
... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup ...
Max-Air Technology
DN: 10 mm - 25 mm
screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized ...
Ho-matic
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... different applications and products Easy maintenance without the need for special tools Sturdiness: valve bodies made from solid bar The BZAW3 is a double seal valve designed to guarantee separation ...
BARDIANI VALVOLE S.p.a.
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Planning, construction and delivery of high quality valves for power plant and process heat generation.
The fast-closing float anti-explosion valve prevents propagation of flame and pressure during explosion to other production equipment. This valve is intended for protection of pipe transport systems.
RSBP spol. s.r.o.
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
AKO ARMATUREN
DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar
... operated Pinch Valves. What are the benefits of air operated pinch valves? Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important ...
AKO ARMATUREN
DN: 25 mm - 150 mm
Pressure: 6 bar
... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air operated pinch valve ...
AKO ARMATUREN
DN: 0.5 in - 2 in
Temperature: -10 °C - 180 °C
Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Pilot media: air, inert gases, water Body material: bronze (CC491K EN 1982 : 2000) Bonnet material: brass (CW617N ...
M & M INTERNATIONAL
DN: 5.5, 3 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material of spindle seal: NBR ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 10, 25, 15, 20 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material of spindle seal: PTFE Material ...
Mader
DN: 0.25 in - 2 in
Pressure: 0 psi - 125 psi
Weight - 0.595 lb Seat - RTFE Construction Chromium plated ball RTFE seats and stuffing box ring Features Blow-out proof stem design Adjustable packing gland Specifications Vent downstream ...
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of ...
Pressure: -1 bar - 9 bar
Temperature: 0 °C - 150 °C
Non-Intrusive Plug Valve Sampler • The plug is flush with the vessel wall when retracted. • Extracts a representative sample from the side of a vessel/dryer. • Can sample under vacuum or over-pressure • Sample Plug ...
DN: 50, 20, 25, 40 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C
... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free.
Paani Precision Products LLP is one of the most renowned Brass Ball Valves Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, we also ...
Paani Precision Products LLP
Paani Precision Products LLP is one of the most renowned Brass Ball Valves Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, we also ...
Paani Precision Products LLP
Paani Precisions is one of the most renowned Brass Needle Valve Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, we also see to it ...
Paani Precision Products LLP
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back ...
A. u. K. Müller
DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... durability in steam and aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves ...
Parker Fluid and climate Controls Europe
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...
Mival
DN: 100, 150, 125, 200, 160 mm
Description Valve for exhaust air. Designed for wall or ceiling mounting. Bayonet holders connect to socket VRGU, VRGL, or VRGM.
LINDAB
Please specify:
Help us improve:
remaining