- Hydraulics - Pneumatics >
- Valve >
- Valve >
- FIP - Formatura Iniezione Polimeri
FIP - Formatura Iniezione Polimeri valves
DN: 25 mm - 150 mm
Pressure: 4, 10, 6 bar
Temperature: -10 °C - 140 °C
... investment costs and optimized valve operation Space-saving inline mounting that easily connects to the piping system High process hygiene due to the use of the same components as the EHEDG-certified LKB valve Count ...
Alfa Laval
DN: 6 mm - 75 mm
Temperature: -50 °C - 204 °C
... style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves and should ...
Parker Refrigerating Specialties Division
Pressure: 350 bar
Temperature: -20 °C - 50 °C
Flow rate: 320 l/min - 1,900 l/min
... DFplus pilot valve and a main stage with poppet and LVDT. With the DFplus pilot valve the TDP achieves extremely fast response times: from 10.5 ms (NG25) up to 28 ms (NG100) with an accuracy of <0.1 ...
DN: 0 mm - 1,200 mm
Pressure: 0 bar - 830 bar
Temperature: -196 °C - 570 °C
Control valve manufacturing started in 1960 under the brand of Nuovo Pignone and since then, its technology has been continuously improved. With over 160.000 valves installed worldwide, compliant with ...
Applications: Single-acting cylinders. Actuation: Flipper lever-operated. Functions: Cylinder piston “advance,” “hold” and “retract.”. Used on these pumps: PE172 and PA172.
Hydraulic Technologies
DN: 101.6 mm
Pressure: 345 bar
Temperature: -40 °C - 204 °C
The EV20-S34 is a screw-in, cartridge style, hydraulic directional element. It is a spring biased blocking valve which will shift to allow full flow from port 1 to 2 only when port 3 is vented to create a pressure drop ...
HYDRAFORCE
DN: 50 mm - 300 mm
Temperature: -20 °C - 93 °C
The PL4200 is axial flow and electric control valve which is composed of electric actuator and the main valve. The PL4200 receives the control signal that output by the control unit to change the spool ...
Terrence Energy Co.,Ltd.
DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar
... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...
SOMAS
DN: 25 mm - 500 mm
Temperature: -273 °C - 450 °C
... synchronized with the safety valves -Complete, coordinated combination of one supplier with qualified resistance coefficients Bursting discs with safety valves in combination -Tight up to the set ...
DN: 25 mm - 80 mm
Pressure: 1 bar - 10 bar
... pharmaceuticals industry. Safety: The double guided valve rod of the safety relief valve guarantees reproducible functional behaviour even in critical operating conditions. Economic efficiency: The ...
Albert Handtmann Armaturenfabrik GmbH & Co. KG
DN: 20 mm - 150 mm
Pressure: 3.5 bar - 6 bar
Temperature: 135 °C - 180 °C
For control of air, water, gas, steam in textile, power generator, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryers, gas generators & others. Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this figure ...
Avcon Controls PVT. Ltd.
Pressure: 100, 210 bar
2-Way Ball Valve (FxF) Working Pressures: 100 | 210 bar (1500 | 3000 PSI)
TECVAL, S.L.
DN: 0.5 in - 6 in
Pressure: 230 psi
... solids. Type-21/21a ball valves are well suited for a wide variety of fluid flow applications. True Union ball valves can be lifted from the line, without having to move the piping, simply by loosening ...
Asahi/America, Inc.
DN: 20, 25, 40, 50 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 80 °C
... pump stop, there will be négative pressure inside of pipeline, it may happen libation or break, now the exhaust valve and air suction valve will suck air speedy, keep the pipeline safety.
Tongling Tianhai Flow Control Co.,Ltd
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket ...
GRUNER
DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C
The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.
FAMAT
DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F
The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...
NIBCO
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...
VAG-Group
DN: 0.25 in - 2 in
Pressure: 2,000 psi
AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only),
BOLA-TEK Mfg.Co
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be ...
Fr. Sauter AG
DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C
Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high ...
DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C
... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_valve_body: ...
DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C
Metaltite® metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures Clean fluids, dirty fluids, high viscosity, scaling fluids, ...
Pentair Valves & Controls
DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C
The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems.
VAT Vakuumventile AG
DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar
... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever and ...
Cross Manufacturing
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining