F.lli Giacomello hexagonal plugs

Diameter: 10 mm - 40 mm
Operating temperature: 0 °C - 100 °C

... Estate guaranteed by a level washer in rubberizing synthetic NBR - They come normally furnished without any label PLASTIC PLUGS WITH BREATHER - Identical for functionality to the serious TMS, carried out entirely ...

Diameter: 16 mm - 40 mm
Operating temperature: 0 °C - 100 °C

tecnopolimero with glass Metric and BSP threads - Body material: Transparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils with additives, greases, acids and alkali. Avoid contact with alcohol or detergents ...

Diameter: 0.25 in - 1 in
Operating temperature: 0 °C - 100 °C

Plastic prismatic plug visual level indicator tecnopolimero with glass - Body material: Transparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils with additives, greases, acids and alkali. Avoid ...

Diameter: 0.375 in - 1.25 in
Operating temperature: 0 °C - 80 °C

Oil circulation sights Tecnopolimero with glass BSP threads - Body material: Transparent polyamide based (PA-T) technopolymer. Resistant to solvents, oils with additives, greases, acids and alkali. - Avoid contact with alcohol ...

Diameter: 10 mm - 22 mm

... - They are normally supplied with label bearing the word OIL. METAL PLUGS WITH BREATHER - Made with milled hexagonal head and crown in light aliminium alloy. - Seal ensured by a gasket with oilproof ...

Diameter: 14 mm - 22 mm

Metal plug with permanent magnet With permanent external magnet Consisting of a milled hexagonal head and crown in light aluminium alloy, the metal plug with magnet (which can also ...

Diameter: 14 mm - 22 mm
Operating temperature: 0 °C - 200 °C

Liquid level visual indicator plug Metric and BSP threads - Body in aluminium alloy D11S. - Oilproof gasket. In aluminium or fibre on request. - Suppliable in anodised aluminium or brass OT 58 on request, for adequate ...

Diameter: 10 mm - 22 mm

Breather plug with valve BREATHER CAPS WITH VALVE The breather plug with valve proposed here works on the following principle: venting is obtained by the pressure inside the reducer acting on the ...

Diameter: 14, 16, 18, 20, 22 mm

Metric and BSP threads This new-concept breather cap is recommended for: - reduction units - machine tools - compressors, etc. For “medium” oil splash. It consists of an ample vapour vent chamber. - Oilproof gasket.

Diameter: 12 mm - 22 mm

Oil filler and breather plug with labyrinth and sintered washer Metric and BSP threads OIL FILLER AND BREATHER CAPS WITH LABYRINTH AND SINTERED WASHER This range of oil breather caps has the same constructional ...