Fluke calibrators

... and ammeters • - Current clamps • - Resistors • - Installation testers • - Earth testers • - Insulation testers • - Calibrators • - Oscilloscopes • - Wattmeters • - Power analyzers • - Power quality analyzers • ...

Pressure: 0 Pa - 100,000 Pa

The portable, battery-operated KAL 84 calibration system combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure sensors and other pressure gauges for low pressures both quickly ...

Temperature: 200 °C - 1,100 °C

... high temperature thermocouples. The PTB 1100 Temperature Calibrator comes in two different models: - PTB 1100-TS temperature calibrator/source - PTB 1100-TC Temperature Calibrator/source ...

Temperature: 0 °F - 104 °F

... design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations. Up to 10 calibration ...

Temperature: 5 °C - 40 °C
Pressure: 1.03 bar
Voltage: 100 V - 240 V

... and battery operated Results directly traceable to NIST Sierra's CalTrak® 500 is an accurate primary standard gas flow calibrator for all inert gases. The 500 is used for calibration and verification of: Mass ...

Pressure: -10,000 Pa - 10,000 Pa

This Microdifferential pressure gauge calibrator is composed of the micro generation pump,standard gauge and the differential gauge bracket.It use high-quality stainless steel and aluminum alloy materials and the seals ...

Gas calibration and analytical system performance validation depends on knowing how to accurately dilute gas standards. Our high-end dilution system (GC blender), based on a laser-calibrated orifice, is the result of over 30 years of ...

Temperature: -80 °C - 1,700 °C

A wide range of calibration equipment for highly accurate sensors, with temperature ranges from -80 ° C to 1700 ° C Termya offers the possibility of supplying all products calibrated in external laboratories under international ...

Temperature: -270 °C - 1,768 °C

... routine operation. The calibrator is designed to simulate a chosen temperature to test thermocouple type K, J, T, R, N, S and E thermometers without the need for specialised equipment or conversion tables. The MicroCal ...

Noise level: 94 dB - 114 dB

The Class 2 Acoustic Calibrator for the NoisePen. The Model 106 has been tested and formally EU Pattern Approved under certificate PTB-1.61.4034842, as meeting all of the requirements of the latest International standard, ...

The calibrator KAL 84 is used for calibrating pressure sensors. It represents a combination of a pressure generator (hand pump) and a pressure meter with digital display. The instrument provides a simple means for testing ...

Temperature: 18 °C - 28 °C

SXGZ-A Insulation Resistance Meter Calibrator is the reference instrument to calibrate insulation resistance meter. The output maximum limitation is 200GΩ, nominal working voltage is 5kV. It’s suitable for all models ...

Temperature: -20 °C - 55 °C

AHT530 is a battery-powered, hand-held unit designed to configure, calibrate and troubleshoot to smart transmitter either remotely or nearby. AHT530 allows you to establish communication with a Hart field instrument over the existing ...

Temperature: -200 °C - 1,820 °C
Pressure: 0 psi - 10,000 psi
Voltage: 0 V - 60 V

•Designed for on-field use, it offers ail advantages of a documenting calibrator. •Measures and generates mV, T/C, Ohms and RTD signais, besides measuring mA. •Output operation simultaneous with mA input. •Internai regulated ...

Temperature: -10 °C - 60 °C
Pressure: 45 psi

AFS–Portable Gas Flow Calibrators A portable gas flow standard that is ready for anything When your calibration process requires the utmost accuracy, the AFS flow standard delivers. It features Alicat’s most advanced ...

Pressure: 10 bar
Voltage: 24 V

The CM20 flow meter allows the monitoring of other flowmeters or leak master. Simply insert the control element between the regulated pressure source and the CM20 flowmeter and adjusted the pressure value to read the actual value of the leak.

Pressure: 16 bar

Static Volume Method Water Flow Standard Device Categories : Calibration Systems and Standard Devices, Water calibration system Specifications • Flow rate range: (0 ~ 800) m3 / h • Device expansion ...

Envira offers a range of trace level multi-gas calibrators (SO2, H2S, NO, NO2, CO, O3 and others), both integrated and portable. It incorporates high precision thermal mass flow controllers and up to four independent ...

Temperature: 0 °C - 50 °C
Pressure: -1 bar - 2,500 bar
Voltage: 0 V - 25 V

HS602 Intelligent Pressure Calibrator has the double-line large screen with backlight function. It can meet customers' requirement in the 6-digit display and 9 pressure units. It provides pressure measurement for calibrating ...

Pressure: -0.09 MPa - 2.5 MPa

SPMK221G automatic pressure calibrator includes pressure generation, pressure measurement, electrical signal measurement and output, and HART communication functions. It is suitable for the calibration of on-site pressure ...

Dead Weight calibration checks help maintain the accuracy of the torque measuring system on all Model RC-35 Viscometers. Quickly determine the condition of bearings and the accuracy of torsion spring setting. Kit includes support bracket, ...

Temperature: -40 °C - 123 °C
Voltage: 100 V - 240 V

... Interchangeable Single hole Thermowell Inserts Computer Interface & Calibration Software Description Precision Dry Block Calibrator with Interchangeable Thermowells Ideal for quick / fast Site Calibration of RTDs ...

Reference magnets are used to quickly check the calibration of a Gauss/Tesla-Meter. They are calibrated permanent magnets traceable to NIST with an aperture for a Gauss/Tesla-Meter probe to be inserted These devices can be used in conjunction ...

Optodyne's QC-500 compact one-day quick-check laser calibration system is designed to perform machine tool calibration based on the ASME B5.54 standard. The one- day quick-check laser system provides a full comprehensive ...

GTEM cell: The GHz electromagnetic wave chamber, which receives the output signal of the power amplifier, forms the required electric field, and the field strength can be measured by the electric field intensity probe. Signal generator: ...