Fluke testers

A compact handheld ultrasonic pulse velocity and pulse echo tester is designed for ultrasonic thickness measurements and flaw detection of concrete and reinforced concrete constructions and rocks. The flaw detector ...

... structures with up to 2 meters thru-transmission capability. A compact, ergonomic and easy to handheld ultrasonic pulse velocity tester for quality assessment of concrete compliant with valid international standards. The ...

A compact, ergonomic and handheld ultrasonic pulse velocity tester for concrete inspection. The device is made of light-weight shockproof plastic and has two built-in transducers with dry-point-contact with fixed base ...

... and rugged tool which can be operated in the field by any personnel, expert or not. Digital Optical Oil Tester: The GESERCO Rapid Optical Oil Tester has a last generation infra-red sensor which combines ...

Manual Cleveland type Flash Point Tester The GESERCO FlashTest™ apparatus is a manual Cleveland type open cup flash point tester. It is intended for determining simply, quickly and cost effectively ...

The 7006 is a single function low-cost pocket sized simulator, designed for test and calibration of process loops. It is simple operation and engineers will be able to pick up the unit and get to work immediately. Just select 4 to 20 ...

The 7007 LoopMate 2 is a dedicated loop signal indicator (RxSim) with an in-built 24 V loop drive supply (TxTest). The operator can select the loop type, and also the type of units, either direct (mA) or % of span display. The loop signal ...

... the purchaser Increase the stability of merchantable coal quality, as well as revenues for suppliers using Portable Coal Tester Prevent unqualified coal into the factory and avoid loss for coal customers Decrease ...

Product introduction: The thermal conductivity meter uses the transient plane source technique (TPS). Test performance is stable and data processing and analysis capability is high, can be used for thermal conductivity measurement of ...

For plastic films, laminated films, fabrics, leather, solar cells, building materials and other materials, as well as the vapor permeability test of tableware, health, medical, textile and leather, and other fields of materials. Working ...

... ring stiffness tester is used to determine the ring stiffness of circular cross-section thermoplastic pipes, according customer’s request, it can also execute compression, ring stiffness, ring softness and creep ratio ...

The pipe opacity tester can be used to determine the impermeability determination of plastic pipes and fittings (showing results as a percentage). The instrument is controlled by an industrial touch screen and operated ...

The GBS-60 model is a digital display Erichsen cupping tester that is ideal for use testing the ductility of metallic sheets and strips. The unit has been developed to comply with the ISO 20482:2003 standards. It has ...

Wireless Pile Integrity Test (P.I.T.) By using the reflected wave method, the instrument is used to assess the integrity of concrete pile and identify the extent and location of the pile defect. It can be used for testing drilled piles ...

• Plug-in 14" / 3 HU • High voltage test AC: 100 - 5,500 V / 0 - 3 mA • High voltage test DC: 100 - 6,000 V / 0 - 10 mA • Insulation measurement DC: 100 - 6,000 V / 250 kΩ - 1 GΩ • Ground bond test AC: 10 - 30 ...

... DC: 100 - 6,000 V / 250 kΩ - 1 GΩ • Wide-range power supply unit: 90 V to 253 V, 50 Hz / 60 Hz The HA 1800M hipot tester combines high-voltage testing (AC and DC) and insulation testing in a single device. The ...

... comparison, error area comparison, Corona quantity comparison, Corona number In addition to its compact size, the ST 6600B surge tester impresses with its enormous performance - at an unbeatable price. It is ideal ...

... developed by Amazon and ISTA to address the risks of damage to packaging throughout the Amazon distribution channel Bench-top tester Self-contained compact design for testing in production or laboratory environments Accuracy ...

The 122-15 Compression Tester is a servo-hydraulic solution for testing the compressive strength of larger pallets, units & loads. The Model 122-15 is a servo-hydraulic compression tester designed ...

Lansmont's Model 152-30 compression tester can be installed on any reinforced concrete floor (ground level recommended). The Model 152-30 is a servo-hydraulic compression tester designed to evaluate ...

The Raptor-HV, also called the high voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of a moderately high AC voltage. This product can work only in combination with a Raptor Master ...

... test chambers water vapor permeability analyzer using infrared sensor is the highest accurate water vapor transmission rate tester, meeting standard of ASTM F1249. 1) Plastic film, composite film, aluminum foil, aluminized ...

Water Vapor Permeability Tester Electrolytic Sensor Method W203 Watef Vapor Permeability Tester Wholly automatic, software easy to use. Curves of transmission rate, water vapor density, humidity and ...

MVTR Tester / Moisture Vapor Transmission Rate Tester for flexible packaging MVTR Testing Introduction W301 2.0 MVTR Tester is based on the test principle of the gravimetric method ...

External Short Circuit Tester is used for UL2580 and ECER100 test standard Test object: battery pack and system Test conditions: The test temperature should be at 20±10℃or higher. (According to the battery system ...

battery crush test tester for UL1642 UN38.3 UL1642 This battery crush tester is used for battery crush tests. This battery testing equipment simulates the conditions of the battery crushing and displays ...

battery flammability tester The flammability tester is also called flammability test machine,it is used for lithium-ion battery packs for handheld electronic products, lithium-ion battery packs for portable ...

MOTOMEA Distribution Transformer Test Systems Routine Testing for Production (EOL) and Quality Assurance (QA) Type Testing at Laboratory (R&D) MOTOMEA is a globally leading supplier of distribution transformer testing systems. MOTOMEA ...

This machine is widely used for the testing of impact strength test of plastic pipe materials and pipe components, and also suitable for the external loads impact strength test of plastic board, glass fiber reinforced plastic and kinds ...

FIT1130 Falling dart impact testing machine applies to impact test for all kinds of plastic film and sheet. It confirms to ASTM 1709-04, ISO7765.1-1988 “Plastic film and sheet- Determination of impact resistance by the free-falling dart ...

N62400 series low voltage high current programmable dc electronic load N62400 is for fuel cell testing. N62400 can load high current under ultra-low voltage. The minimum operating voltage when loading 1200A can be low to 0.2V. It is ...

N23010 series 24 channels high precision programmable dc power supply N23010 series is a high-precision, multi-channel programmable DC power supply specially developed for the semiconductor industry, which can provide high-precision, ...

N1200 series multi channel fuel cell voltage monitoring instrument N1200 series is special for fuel cell R&D and production. It is with compact size,high integration, high reliability and fast data transmission. N1200 standalone supports ...

C403H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2 and ...

C406H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2 and ...

BTY-B3P Gas Permeability Tester is based on the differential pressure method, and is professionally applicable to the determination of gas permeability of battery diaphragms, breathable films and other relative polymer ...

The BeDensi B1 stands as a specialized bulk density tester crafted for assessing the bulk density of samples beyond metal powders. Employing the natural deposition method, it adheres to the standards outlined in GB/T ...

The BeDensi B1-S is a Scott volumeter for measuring the bulk density of metallic powders and granular materials. With its compact and durable design, the BeDensi B1-S is ideal for use in laboratories and production facilities, assessing ...

The BeDensi P is an apparatus designed for the accurate measurement of bulk density in both plastic materials and molding materials. This equipment adheres to stringent manufacturing standards according to international standard ISO : ...

Proxy Tester is a portable instrument created to satisfy the needs of both installers as well as retailers. It makes it possible to control correct functioning of any D.C. sensor or magnetic sensor even when lacking expensive ...

Vibration tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is ...

... broken IP splashproof membrane control panel with emergency stop button Description The Multitest-itensile and compression tester is driven by software installed on a computer. Its offers both consistency and reliability ...

This machine is used to test heat-sealed plastic and metalloplastic tubes, doypacks, bags and other packaging, directly on the production line or laboratory. Why do you have to test your weld ? During heat sealing, weld defects may ...

The ATS-Booste tube crusher allows to test, by crushing, the resistance of samples such as bags, pouches, promotional samples, doypack… up to 2000N. Equipped with adapted and customisable pressers. This 100% pneumatic device requires ...

The EMF-701A is a magnetic field tester manufactured by TECPEL®. This device is used for fast, dependable, and simple measurement of electromagnetic field radiation levels around home appliances, industrial equipment ...

PHS-865 non-contact phase sequence tester. Designed to check a wider range of three-phase power supplies. One machine with two functions: phase loss and phase sequence detection. Non-contact detector clamp. There is no ...

It has the dual functions of detecting lack of phase and phase sequence. Clamp the alligator clip to the outside of the power cord to detect Comes with four powerful magnets 1. Phase sequence detection (positive phase, anti-phase, ...

• 4 Digits LCD Display • Auto Range For MΩ & Ω • 40 Segments Analog Display • Test Hold Function For Easy Operation • Automatic Zero To Null Lead Resistance • Easy To Carry • Discharge Indication Beeper For MΩ Range • >1mA Test ...

Structural Integrity Verification And Initial Bubbling Point Test Stand ISO 2942-2004 Products Introduction: It specifies a bubble-point test method for verifying the fabrication integrity of a filter element or determining the ...

Product Introduction: Definition: The oscillating tube tester is primarily used to test the waterproof performance of electronic appliances, lighting fixtures, electrical cabinets, electrical components, automobiles, ...

Tightness Testing of Automotive Energy Storage Batteries Products Introduction: This equipment is a helium detector for the steel shell battery after the injection hole is sealed and welded. It mainly includes processes such as battery ...