FLUX stationary pumps

Flow: 3.17, 5.07 l/min
Pressure: 4,150, 3,800 bar
Power: 30, 50 ch

The HyPlex@ Prime pump represents the next generation of energy efficient, direct drive ultrahigh-pressure waterjet pumps. The HyPlex's direct drive delivers superior ratio of input energy to the waterjet. Next ...

Flow: 13 l/min
Weight: 22 kg

240V / 50 Hz Operation Pump only ( no controller ) Low revving : 1450 rpm unit 13Lpm Flow Integrated Un-loader Adjustable Pressure Continuous Run Heavy Duty Industrial design. Italian quality Pump

Flow: 1,350 l/min - 2,200 l/min
Pressure: 60,000, 70,000, 80,000 Pa
Power: 2.2, 3.7 kW

... compared with conventional models) • Long Life Increased 10% with newly developed vane blade material. (compared with conventional models) Operation not allowed at ultimate vacuum.For model selection ...

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 8 l/min - 180 l/min
Pressure: 2 MPa - 25 MPa

1. Combinning special internal designs and strict engineering disciplines has reduced noise level to new lows in whole pressure zone. 2. Depending on variety of application needs, multiple optional unique control methods are available. ...

Pressure: 300 bar

Hydraulic Gear Pump – B3 Series | 38 – 125cc/Rot • - Medium Size • - Fast to Mount • - Bidirectional • - Rear and Side Inlet/Outlet Bidrectional Hydraulic Gear Pump – B3 series First of all it’s ...

Flow: 0 m³/h - 1,000 m³/h
Pressure: 0 bar - 350 bar

... -diaphragm pumps allow for reliable and low-wear handling of abrasive, aggressive and challenging media. Thanks to the linear flow path through the hose-diaphragm and the valves, the conveyed fluid will neither come in ...

Flow: 0.1 m³/h - 30 m³/h
Power: 5 W
Length: 85 mm

Peristaltic pump with fixed flow configurable from 0.1 l/h to 30 l/h, ignition through external system, power supply 24 Vdc or 230 VAC.

Flow: 0.25 m³/h - 1,300 m³/h
Head: 3 m - 230 m
Fluid temperature: -100 °C - 350 °C

Stainless Steel Magnetic Drive Chemical Process Pump Discover here the advantages of the MKP from CP – The highly reliable centrifugal pump for various applications. Overview Special features Up ...

Flow: 30 m³/h
Pressure: 8 bar
Power: 11 kW

... self-priming • reversible • low pulsation • high productivity • high operating reliability • easy wear compensation of the hose pump via eccentric adjustment • central lifting eye for crane handling • forklift ...

Flow: 0 m³/h - 300 m³/h
Pressure: 16 bar
Head: 150 m

Sealless magnetic drive chemical process pump. Connecting dimensions acc to ISO 5199 Wide selection of MOC´s. Precision casted casing and impeller Hastelloy C4 can material with minimal eddy currents, one piece deep ...

Flow: 2 l/min - 17 l/min
Pressure: 12 bar
Length: 266 mm - 476 mm

BMF, BCF pumps are volumetric gear pumps suitable for transferring lubricant viscous liquids without any suspended solids or abrasive substances. They are self-priming pumps used for ...

Flow: 0 m³/h - 100 m³/h
Pressure: 16, 24, 40 bar
Head: 80 m

Type KMB is a volute casing pump with housing dimensions according to ISO 2858 and simple magnetic coupling. The size selection is limited. The pump has a permanent magnet coupling, and the containment ...

Flow: 0 l/h - 700 l/h
Pressure: 10 bar
Power: 0.75 kW

- Pump body in 316L stainless steel - Rotor and scraper in food industry grade plastic - Mechanical seal in widia - Minimum speed of rotation: 60 rpm - Maximum speed of rotation: 330 rpm - Calculated capacity per ...

Flow: 0.6 m³/h - 132 m³/h

Rotary Twin Gear Pump Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” (Rotary Twin Gear Pump - Molasses Gear Pump - Positive Displacement ...

Flow: 4.8 m³/h - 42 m³/h
Power: 0.37 kW - 4 kW

Vertical pumps are used in chemical transfer. Mainly used when the liquid needed to be pumped below the pump level. Vertical structure makes it possible to work in the liquid and suction can be made ...

Flow: 0.5 l/min
Pressure: 689 bar
Length: 387 mm

... allowing the addition of cooling fluid, these pumps can easily be used to pump both solvents and CO2 3. Remote Diagnosis Even with our robust designs, unforeseen problems can occur. In-order to ensure ...

Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm

Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze and pump ...

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...

Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW

... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO 2858 standards Sold either with unfitted ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

The Horizontal Centrifugal Pumps of the CP range are highly reliable pumps with very high performance. They can work in very harsh conditions and constant over time. The sturdiness of its structure allows ...

Flow: 9, 21 l/h
Pressure: 0 Pa - 250,000 Pa

... Tiny footprints Description The EMX08 is a piston pump. Spring-loaded valves on the intake and output side allow the pump to aspirate easily during operation. It is possible to operate the pump ...

Flow: 50 us gal/min - 750 us gal/min
Pressure: 3.4 bar - 15.4 bar

... Each pump set is tested in our factory, prior to dispatch, as per UL, FM and NFPA standards. These pumps are covered by a warranty of one-year subject to standard terms and conditions. NAFFCO also ...

Flow: 1,100 m³/h
Pressure: 10, 16 bar
Head: 150 m

Optional: with heavy duty bearing for PN16. Materials : Cast Iron, Ductile Iron, Bronze, Cast Steel, SS304, SS316, Duplex SS Flange : PN10/ PN 16 Applications : HVAC and Cooling Tower Fire Protection and Fire Fighting Marine ...