Power: 1,000 W
Intensity: 15 A
Torque: 12 Nm
... 4CV at maximum power. The advantage with electric motors is that everything is adjustable via the power electronics: torque, acceleration ramp, braking ramp, motor braking ...
OZO
Power: 6, 10 kW
Intensity: 100 A
Rotational speed: 4,000 rpm
The BLDC brushless motor with central rotor is designed to deliver a power of 6000W air-cooled and 10kW liquid-cooled. Nominal line current of 100A and 200A max. It will enable ...
OZO
Power: 15,000 W
Intensity: 213 A
Torque: 12 Nm
This BLDC central rotor brushless motor is designed to deliver 20,000W (20kW) of power at 48V, 60V, 72V or 84V, with a nominal line current of 230A and a phase current ...
OZO
Power: 0.73 kW - 7.12 kW
Intensity: 1.17 A - 13.3 A
Torque: 14 Nm - 816 Nm
... series of housed synchronous torque motors not only sets a new benchmark with regard to maximum drive system torque and stiffness, but they are also extremely compact. The KTY series is a useful alternative ...
GEORGII KOBOLD
Power: 18.5 kW
Intensity: 33 A
Rotational speed: 3,550 rpm
All data see photo on type plate. Year of manufacture 2016. As good as new, was stored after 1 test run. The engine can be connected and tested on site, after coordination also via online video chat. Any warranty is excluded.
Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm
... hour. Fitting with blowers, the motor can be widely used for ventilation in tunnel projects,hotels, mansions, other constructionsm where ventilation is needed. D1CS series electric motor ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm
... degrees C. The two kinds of motors have the same parameters. The motor has good closeness. The motor protection level for general places is IP44, and the motor protection ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 30 kW
Intensity: 57 A
Torque: 300 Nm
... connect to the A.C power with constant and steady frequency and voltage, and must not connect to invert supply. 3, Except the length of the motor, dimensions of D1CEJ motor are fully ...
Dalian Dalmo Electric Motor Co. Ltd
... , simplifies motion control by incorporating a built-in controller and motor encoder. Capable of over 25,600 microsteps per revolution and up to 2650 rpm, this compact stepper motor includes a detachable ...
Power: 4.1 W - 10.2 W
Intensity: 0.76 A
Torque: 0.0101 Nm - 0.0113 Nm
... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 10.2, 9, 4.1 W
Intensity: 1.17, 0.6 A
Torque: 0.0101 Nm - 0.0113 Nm
... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 7.8 W - 8.7 W
Intensity: 0.73 A
Torque: 0.006 Nm - 0.0092 Nm
... stator was designed for maximum output per unit volume to maximize winding. ・Long service life Since these are brushless motors, the only limit to service life is how long the ball bearings last. ・Smooth revolutions Thanks ...
CITIZEN CHIBA PRECISION CO., LTD.
Power: 73 W
Torque: 5 Nm
Rotational speed: 1,000 rpm - 20,000 rpm
... 5.0cN･m Mass: 142g (excluding motor cord) Connectable attachments: Rotary, rotary slim type, rotary slim long type, Lever clamp, rotary φ6 type, angle 90, belt sander, mini reciprocating Standard accessories: Motor ...
Power: 84 W
Torque: 4 Nm
Rotational speed: 1,000 rpm - 40,000 rpm
... Maximum output: 84W Maximum torque: 4.0cN･m Mass: 96g (excluding motor cord) Connectable attachments: Rotary, rotary slim type, rotary slim long type, lever clamp Standard accessories: Motor cord ...
Power: 26 W - 105 W
Intensity: 1 A - 10 A
Torque: 0.06 Nm - 0.3 Nm
... of round and square Ø42mm brushless motors designed for a variety of industrial and commercial devices. Designed to operate at lower noise levels while providing reliable torque. Configurable with different electronic ...
ISL PRODUCTS INTERNATIONAL
Power: 20 W - 190 W
Intensity: 1 A - 12 A
Torque: 0.1 Nm - 0.5 Nm
... round and square Ø57mm brushless motors designed for a variety of industrial and commercial devices. Engineered for use in demanding applications where long life is required. Configurable with different electronic ...
ISL PRODUCTS INTERNATIONAL
Power: 100 W
Intensity: 2 A
Torque: 10 Nm
The BLDC-S42-66-24-3800-S is a powerful and efficient Ø42mm Brushless BLDC Motor designed for 24VDC operation. This motor delivers high torque output and reliable performance in a compact package, making ...
ISL PRODUCTS INTERNATIONAL
Power: 50 W
Torque: 0.3 Nm
Rotational speed: 2,800 rpm - 6,400 rpm
Motor M42: DC motor with permanent magnets 12 and 24 Volt, with starting torque up to 0.3 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output power, ...
OSLV ITALIA
Power: 100 W
Torque: 2, 2.5 Nm
Rotational speed: 1,200 rpm - 7,000 rpm
Motor M62: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, noload speed and output ...
OSLV ITALIA
Power: 350, 120 W
Torque: 2.5, 2 Nm
Rotational speed: 5,000 rpm
Motor M76: DC motor with permanent magnets 12, 24, 36 and 48 Volt, with starting torque up to 2.5 Nm. Further details such as parts’ images, nominal voltage, no-load speed and output ...
OSLV ITALIA
Intensity: 2.3 A
Torque: 2.3 Nm
Rotational speed: 3,000 rpm
... number of drive compatible drive pinouts. • The motors can be supplied with or without brake. • IP 65 as a standard be can be ordered with IP 67. • The technology with integrated coupling, ...
Power: 6 kW
Rotational speed: 9,000 rpm
... hydraulic tool, HDD developed a motor using its patented oil and water-cooling system. This resulted in a motor delivering 6kW of power at 9000rpm with a weight of only 3,3 kg. The power-to-weight ...
Rotational speed: 500, 600 rpm
Diameter: 48 mm
Operating temperature: -30 °C - 80 °C
The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired.It could be ordered in clockwise, anticlockwise and no-sense rotation.
ELETTROMECCANICA CDC s.r.l.
Power: 200, 100 W
Torque: 0 Nm - 0.002 Nm
Rotational speed: 0 rpm - 500,000 rpm
Permanent-magnet machine for direct drive of applications with highest speed demands. - Special mechanical rotor construction for highest stresses - Stator winding and core configuration for optimal efficiency despite highest rotational ...
Celeroton AG
Power: 730, 1,000 W
Torque: 0 Nm - 0.034 Nm
Rotational speed: 250,000, 280,000 rpm
Permanent-magnet machine for direct drive of applications with highest speed demands. - Special mechanical rotor construction for highest stresses - Stator winding and core configuration for optimal efficiency despite highest rotational ...
Celeroton AG
Power: 2,500 W
Torque: 0 Nm - 0.095 Nm
Rotational speed: 0 rpm - 250,000 rpm
Permanent-magnet machine for direct drive of applications with highest speed demands. - Special mechanical rotor construction for highest stresses - Stator winding and core configuration for optimal efficiency despite highest rotational ...
Celeroton AG
Power: 0.37 kW - 7.5 kW
... submersible asynchronous electric motor manufactured by Dab Water Technology. The first type the 4GG has 4 asynchronous two-poles submersible motor that requires 220 - 230 V. The 6GF-6GX has submersible ...
Power: 2 kW - 100 kW
Rotational speed: 1,000, 2,000, 1,500 rpm
... leading Italian motor manufacturers, is able to supply CNC complete packages, accessory drives and motors including spindle motors. These are special asynchronous motors ...
D.Electron
Torque: 33.5 Nm
... The electronic wire adopts dip paint technology to better dissipate heat from the motor temperature. The winding of a single strand of copper wire reduces copper wear and reduces the current ...
Hangzhou Yushu Technology Co.
... powered by electric motors. Velmex products are built motor-ready. Motors are an adder to the product. Customers may purchase the motors needed direct ...
Power: 7,163, 7,165 W
Intensity: 1.3 A - 37 A
Torque: 28.819, 28.824 Nm
BO6452N3B 64mm 48v High Power Brushless DC Motor Diameter：64mm Lengh ：52mm Voltage：48V、36V、24V Max. output power ：7165W Speed：9500rpm Applications UAV, aeromodelling, etc. Options ...
Constar Motion Co., LTD
Power: 179, 556 W
Intensity: 0.12 A - 62.1 A
Torque: 0.0086 Nm - 0.3289 Nm
B1659NH2B High Efficiency 16mm Coreless BLDC Motor Diameter：16mm Length：59mm Voltage：32V 36V Max. output power ：556W （1）Suitable for high speed applications （40000-65000rpm）（2）Long lifetime: ...
Constar Motion Co., LTD
Power: 1,732, 1,892, 1,681 W
Intensity: 13, 9.7, 19.5 A
Torque: 1.21 Nm
BO8724N2B 87mm Outer Rotor Brushless DC Motor.Dia：87mm Lengh ：24mm Voltage：48V、24V、36V Max. output power ：1723W kv100， 87mm Outrunner Brushless DC Motor Diameter：87mm ...
Constar Motion Co., LTD
Power: 0.75 kW - 200 kW
Rotational speed: 1,000, 3,000, 1,500 rpm
Operating temperature: -15 °C - 40 °C
... reluctance motors use ferrite to generate permanent magnet auxiliary torque and take reluctance torque as the main driving torque. The motors have the characteristics of high power density and small ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.75 kW - 1,000 kW
Intensity: 0.9 A - 672 A
Torque: 2.5 Nm - 2,581 Nm
SUNVIM IE4 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE4 motors are manufactured with premium grade silicon steel, low harmonics winding, ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.75 kW - 375 kW
Intensity: 1.6 A - 674 A
Torque: 2.5 Nm - 3,039 Nm
SUNVIM IE3 electric motors are manufactured according to international standard IEC60034-30-1:2014. All IE3 motors are provided with premium quality cold-rolled silicon steel, low harmonics ...
Shandong Sunvim Motor Co., Ltd.
Power: 0.13 kW - 22 kW
Intensity: 1.5, 2, 3.4, 1.8, 3.3 A
Torque: 1.2 Nm - 70 Nm
EC (Electronically Commuted or Electronically Controlled) motors refer to such electrical engines equipped with permanent magnets rotor and controlled by an inverter drive which tunes ...
Simotop group
Power: 160 kW - 12,000 kW
Intensity: 15 A - 3,200 A
Torque: 500 Nm - 508,000 Nm
... heights from 315 to 1120 mm. The complete range is designed for fixed speed drive applications with DOL power supply, and is available for VFD cases fed by frequency converters The motors ...
Elom Motor
Power: 160 kW - 3,200 kW
Rotational speed: 500 rpm - 3,600 rpm
... voltage cast iron motors offering more density power than has ever been achieved before.is often use a motor one frame size smaller than other standard products. This helps to save space ...
Elom Motor
Power: 160 kW - 16,000 kW
... heights from 315 to 1120 mm. The complete range is designed for fixed speed drive applications with DOL power supply, and is available for VFD cases fed by frequency converters The motors ...
Elom Motor
Power: 0.12 kW - 45 kW
Rotational speed: 3,000, 1,000, 1,500 rpm
SERMES
Power: 0.75, 315, 250, 200 kW
Rotational speed: 1,000, 1,500, 750, 3,000 rpm
Diameter: 158 mm - 700 mm
SERMES
Power: 0.18, 0.12, 45, 30 kW
Rotational speed: 1,000, 1,500, 3,000 rpm
Diameter: 123 mm - 465 mm
SERMES
NEMA size 8 PLM Linear Actuator Stepper Motor Models Features: - Eliminates additional shaft couplings - Reduced tolerance stack-up - Improves performance - Customizable to unique requirements - External linear ...
OMS Motion, Inc.
NEMA size 14 PLM Linear Actuator Stepper Motor Model Features: - Eliminates additional shaft couplings - Reduced tolerance stack-up - Improves performance - Customizable to unique requirements - External linear ...
OMS Motion, Inc.
NEMA size 14 PLM Linear Actuator Stepper Motor Model Features: - Eliminates additional shaft couplings - Reduced tolerance stack-up - Improves performance - Customizable to unique requirements - External linear ...
OMS Motion, Inc.
Power: 9.2 kW
... gearbox and electric motor, our product range includes standard three-phase motors and single-phase motors as well as brake motors, ATEX motors ...
Rehfuss Drive Solutions GmbH
Power: 40, 100 W
Intensity: 4 A
Torque: 2 Nm
Direct wheel drive, roller conveyors and turntables. High torque at low speed, special solutions on request Field of application: - Direct drive of wheels, roller conveyors - Turntables - High torque at low speed Advantages ...
Kern Antriebstechnik GmbH
Power: 40 W - 500 W
When high-precision and 100% accuracy is required motors with positioning accuracy in the micrometer range, DA series prove their worth. With a compact space-saving build and relatively cogging (detent torque) free ...
Kern Antriebstechnik GmbH
Power: 50 W - 500 W
The GM Series manufactured by KERN is a type of a motor equipped with a precise turn run. Additionally, the precise true run of this device is operated with a flexible spectrum. This device is applicable for a wide range ...
Kern Antriebstechnik GmbH
Torque: 386 Nm
Rotational speed: 400 rpm
Diameter: 189 mm
RD184 Motor Final Drive Motor RD 184 Motor is designed for compact designs, peak torque of 368Nm and 400U/min. It is widely used for Power Take Out ...
I&W Electric Drive Systems
Please specify:
Help us improve:
remaining