GE Motors electric motors

Power: 30 W - 300 W
Torque: 0.2 Nm - 583 Nm
Rotational speed: 80 rpm - 4,000 rpm

Brushless DC Motor Features 30-300 W/80-4000 r/min 16 programmable speeds Digital setting/display Vertical movement possible Load factor display Torque limitation Up to IP67 Rated power: ...

Torque: 0.3 Nm - 140 Nm

Closed Loop Stepper Motor Driver Combination for AC and DC Power Supply Features Absolute sensor, position monitoring No external sensors necessary Low heat generation EtherCAT, EtherNet/IP, ...

Torque: 0.35 Nm - 0.99 Nm
Diameter: 42 mm

High-Torque 2-Phase Stepper Motors Features High torque in the lower speed range Compact design Low heat generation Energy-saving Frame size: 20 - 85 mm Basic step angle: 0.018 - 1.8 ° Maximum holding torque: ...

Power: 500 W
Intensity: 9.5, 1.4, 5, 1.8 A
Torque: 0.3 Nm - 6.5 Nm

... positioning applications with reduced requirements: the long-life stepper motor series with two-phase hybrid technology. • Small increments and high driving torques thanks to 2-phase hybrid ...

Intensity: 0.05 A
Rotational speed: 8,520 rpm
Operating temperature: -40 °C - 100 °C

The brushless ECX FLAT motor series is optimized for high torques. Innovative winding technology and high-performance magnets give the ECX FLAT a unique ratio of torque to size, making it ideal for applications involving ...

Power: 105 W
Intensity: 256 mA - 4,860 mA
Torque: 0.0982 Nm

The EC frameless DT motors are BLDC motor kits with internal-rotor technology. The rotor and stator are delivered separately, without bearings or motor shaft, and are ...

Power: 100 W
Intensity: 141 mA - 4,700 mA
Torque: 0.185 Nm

The EC frameless DT motors are BLDC motor kits with internal-rotor technology. The rotor and stator are delivered separately, without bearings or motor shaft, and are ...

Power: 9, 2, 1, 19 W
Intensity: 0.3, 0.4, 0.9, 1.8 A
Torque: 0.007, 0.0068, 0.0067 Nm

The 16ECP36 2A motor has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. Featuring integrated electronics, the 16ECP36 2A Ultra ECP motor ...

Power: 27.5 W
Intensity: 2.1, 0.9, 0.4, 0.3 A
Torque: 0.0072, 0.0071, 0.007, 0.0075 Nm

Downsize and optimize your application with a brushless slotless DC motor that also runs up to 25W continuous power at 60,000 rpm. Motor Highlights > Optimized and ...

Power: 19.3, 7.3, 2.1 W
Intensity: 0.72, 0.39, 1.7 A
Torque: 0.0134, 0.0139 Nm

The 16ECP52 2A motor has been developed to be one of the most advanced and highest performing brushless slotless motors in its class. The 16ECP52 2A motor is a plug and play motor ...

Power: 79.5 W
Intensity: 11 A
Torque: 0.2 Nm

Power: 122.5 W
Intensity: 115 A
Torque: 0.3 Nm

Power: 247.5 W
Intensity: 26 A
Torque: 0.55 Nm

... compact design: The Bosch gearless motors excel at durability, robustness and high speeds at the lowest noise levels. Decades of experience in manufacturing of electric motors have led ...

Power: 0 W - 8.5 W
Torque: 0.0006 Nm - 0.01 Nm
Rotational speed: 7,400 rpm - 14,600 rpm

DC-Micromotors with precious metal commutation These ironless DC motors are the most compact in the industry today and most types feature integrated high resolution encoders for use in highly precise ...

Power: 0 W - 4 W
Torque: 0.0004 Nm - 0.003 Nm
Rotational speed: 5,900 rpm - 15,500 rpm

... form the basis for drive systems in applications where space is extremely limited. With their powerful rare-earth magnets, the motors deliver a continuous output of 0.8 W to 4 W and at the same time ...

Power: 6 W - 100 W
Torque: 0.0097 Nm - 0.134 Nm
Rotational speed: 0 rpm - 10,000 rpm

Brushless flat motors with External rotor technology The external rotor motors of the BXT series set new standards: thanks to innovative winding technology and optimum design, the BXT motors ...

Power: 0.12 kW - 17 kW
Intensity: 0.67 A - 36 A
Torque: 0.56 Nm - 55.1 Nm

• Efficiency class IE1 • Global approvals and acceptances NORD switchable pole motors enable operation with two or more fixed speeds. Squirrel cage motors with this design provide an economical ...

Power: 0.12 kW - 45 kW
Intensity: 0.39 A - 147 A
Rotational speed: 1,350 rpm - 1,485 rpm

... kW. As standard, the UNIVERSAL motor is equipped with a temperature sensor (TF). Versions The motor is available in the IEC sizes 63 to 225, and in the following versions: • Foot-mounted motor ...

Power: 0.12 kW - 55 kW
Rotational speed: 2,500 rpm - 3,500 rpm

... encoder (IG), External fan (F) • Motor protection: Temperature sensor (TF), Thermostat (TW), Anti-condensation heater (SH) • Motor connection: Motor plug connection (MS) Charateristics NORD ...

Power: 100 W - 1,500 W
Torque: 0.318 Nm - 14.3 Nm
Rotational speed: 3,000 rpm

Low and medium inertia Wide selection: 100 W to 1.5 kW capacity, holding brake option Mounted serial encoder: 20 bits, high resolution Protective structure: Standard protection IP55, expandable to IP67

Power: 300 W - 15,000 W
Torque: 1.96 Nm - 224 Nm
Rotational speed: 1,500 rpm

SGMGV Model Features High-speed driving of feed shafts for various machines Wide selection: 300 W to 15 kW capacity, holding brake option Mounted serial encoder: 20 bits, high resolution Protective structure: IP67 Application ...

Power: 1,000 W - 7,000 W
Torque: 3.18 Nm - 47.6 Nm
Rotational speed: 3,000 rpm

... serial encoder: 20 bits, high resolution Protective structure: IP67 (Not including the IP22 compliant enclosure for 7.0 kW motor)

Power: 10 W - 270 W
Intensity: 130 mA - 1,400 mA
Torque: 0.07 Nm - 0.96 Nm

... enclosed with external ventilation. Class F winding. IP65 protection according to CEI EN 60529. Power from 9 to 270 W. Version B5 – B14. On request: motor equipped with electromagnetic brake supplied ...

Torque: 0.0007 Nm - 19 Nm

Main Specifications: Size: 14 mm square to 106 mm round (NEMA 42) - 10 frame sizes Resolution: 1.8° and 0.9°/ step Holding torque: 0.0065 to 19 Nm Winding: Unipolar and Bipolar models Single or Double shaft version Class B (130°C) ...

... stepping motors, SS serie Main features Square size : 42mm (NEMA17) or 50mm Basic step angle : 1.8° Winding : Bipolar, lead wire type Current per phase : 1 A Customization upon request Key ...

Torque: 0.2 Nm - 2.15 Nm

... Specifications: Size: 42mm square (NEMA 17) and 60mm square (NEMA 23) Resolution: 0.9°/ step Holding torque: 0.20 to 2.15 Nm Current / phase: 1 to 2A Winding: Unipolar and Bipolar models Single or Double shaft ...

Rotational speed: 360, 600, 960 rpm

... speed and high torque drive without missed steps Easy operation setting with external adjuster (Gain, speed filter, in-position, resolution) Built-in brake type motors available Built-in ...

... series is an AC powered 2-phase closed loop stepper motor system featuring integrated drivers. The AC powered motor system can maintain higher torque during high speed ...

The AiC series is a 2-phase closed loop stepper motor system featuring integrated drivers and controllers. The motor system can control motion of multiple axes directly with network communication. The ...

Power: 260 W
Torque: 0.27 Nm
Rotational speed: 13,300 rpm

... Combination: Precision Gearboxs, Drive Electronics and Encoders Power Motor offers the industry’s largest selection of complementary products tailor-made for all of its DC ...

Power: 180 W
Torque: 0.5 Nm
Rotational speed: 5,200 rpm

... Encoders Power Motor provides more than 130,000 kinds of Brushed DC Motor application data for customers to select or reference, and with a specific reduction ratio ...

Power: 273.5 W
Torque: 0.835 Nm
Rotational speed: 0 rpm - 2,146 rpm

Power Door gate DC Motor 1.Introduction The Power Door DC Motor(24V), designed for a famous brand, provides the ideal speed and ...

Power: 40 W
Intensity: 3 A
Torque: 0 Nm - 0.3 Nm

• Stepper motor with embedded drive and motion controller • Stepper motor with an integrated freely programmable servo controller • High dynamics and efficiency through field-oriented ...

Power: 40 W
Intensity: 0 A - 3 A
Torque: 0.3 Nm

• Stepper motor with embedded drive and motion controller • Stepper motor with integrated freely programmable servo controller • High dynamics and efficiency through field-oriented ...

Power: 40 W
Intensity: 3 A
Torque: 0.3 Nm

• Stepper motor with embedded drive and motion controller • Stepper motor with an integrated freely programmable servo controller • High dynamics and efficiency through field-oriented ...

Linear stepper motors can dramatically reduce cost and save space. There is no coupling, no additional bearing support and no assembly work required. This not only reduces the cost but also reduces the failure rate due ...

Linear stepper motors can reduce cost and save space. There is no coupling, no additional bearing support and no assembly work required. This not only reduces the cost but also reduces the failure rate due to fewer components ...

Torque: 0.12, 0.18, 0.2, 0.3 Nm
Rotational speed: 3,000 rpm
Diameter: 8, 12 mm

... is also not required. New motor technology with large double row ball bearing for axial force 7100N. Below versions can be delivered • Rolled ball screw up to 3 meter • Captive version up to 127 mm travel length • ...

Power: 405 W - 1,700 W
Intensity: 7.24 A - 46.8 A
Torque: 3,640 Nm - 4,040 Nm

... Design with Integrated Power Brushless DC motors (BLDC or EC motors) are renowned for their reliability, efficiency, and power. Now, we're taking things ...

Power: 18.4, 20, 22.9 W
Torque: 0.02, 0.021 Nm
Rotational speed: 9,000, 9,400, 10,500 rpm

» 3-phase BLDC motor with high-quality rare earth-magnets » High power density and overload capability » Weight-optimized motor design » No cogging torque/ coreless design » Low noise level » With ...

Power: 1,805 W
Rotational speed: 9,000 rpm

... overload capability » Weight-optimized motor design » No cogging torque/ coreless design » Low noise level » This motor is on request available in different voltage versions Nominal voltage - V ...

Power: 0.06 kW - 110 kW

Three-phase motors and brake motors with high low noise, progressibity and dynamics. They are specifically suitable for coupling with gearmotors minimizing the dynamic overloads deriving ...

Power: 1.7 kW - 140 kW
Torque: 11.5 Nm - 1,700 Nm

... tables. FEATURES Discover the strengths of our heavy duty roller table motors IEC asynchronous three-phase 4 and 6 poles motors with cage rotor totally enclosed without fan Motor ...

Intensity: 2 A
Torque: 1.1 Nm
Rotational speed: 100 rpm

No drive belt adjustment / replacement Fewer parts Better servo performance Silent operation ●Meaning Of Torque Motor (DD motor) 1. Direct Driver - direct drive。 2. Due to the ...

Power: 144 W - 13,200 W
Intensity: 0.41 A - 29.52 A
Torque: 0.41 Nm - 54.71 Nm

... allows to the R series motors to have the following features: • constant torque from 3 to 120Hz • higher Power Density (same power in smaller motor sizes) • ...

Power: 0.75 kW - 375 kW
Intensity: 0.38 A - 231.7 A
Torque: 0.3 Nm - 846.6 Nm

• Three phase squirrel cage induction motors • IEC Metric Motors from 56 to 315 frame size • SMX Series comply with IE2- IE3 efficiency class (regulation EU 2019/1781) • Totally Enclosed Fan Cooled ...

Diameter: 56 mm - 1,123 mm

Power: 0.5 W
Intensity: 104, 54 mA
Torque: 0.0001 Nm

CMS07-17 is a Brushed Motor with a diameter of 7 mm and length of 17 mm. Precious metal commutation, Sleeve bearing Brushed Motor. Rated torque(mNm):0.144/0.135 No load speed(rpm):20200/22100 No ...

Power: 0.7, 0.5, 0.6 W
Intensity: 45, 103, 61 mA
Torque: 0.0001 Nm

CMS10-13 is a Brushed Motor with a diameter of 10 mm and length of 13 mm. Precious metal commutation, Sleeve bearing Brushed Motor. Rated torque(mNm):0.138/0.141/0.144 No load speed(rpm):21100/24500/28700 ...

Power: 0.6, 0.7, 1 W
Intensity: 116, 70, 56 mA
Torque: 0.0003 Nm

CMS10-18 is a Brushed Motor with a diameter of 10 mm and length of 18 mm. Precious metal commutation, Sleeve bearing Brushed Motor. Rated torque(mNm):0.271/0.273/0.293 No load speed(rpm):12200/14600/18000 ...

Power: 27, 39 W
Torque: 4, 2 Nm
Rotational speed: 54, 187 rpm

... and gate valves. The encoTRive MA 025 is the optimal drive for occasional adjustment tasks, for instance as an actuator for automating previously manual setting tasks and as an auxiliary drive for ...

Power: 182, 480 W
Torque: 0.4, 1.32 Nm
Rotational speed: 4,350, 3,475 rpm

... encoTRive MP 200 compact drive especially shows its strengths in special machine construction with constantly changing machine configurations. It is also ideally suited for use as a powerful positioning drive ...

Power: 303, 273 W
Torque: 0.66, 0.6 Nm
Rotational speed: 4,350 rpm

Main or auxiliary drives for demanding applications encoTRive MD compact drives have the same electric motors and transmissions as encoTRive MP positioning drives. Thanks to special electronics and ...

Power: 11 W - 403 W
Torque: 0.042 Nm - 1.45 Nm
Rotational speed: 1,200 rpm - 2,750 rpm

... application. The capacitor motor - the concept In comparison to the shaded-pole Motor, the capacitor motor has a better efficiency and generally also a higher starting torque. The ...

Power: 0.7 W - 29.4 W
Torque: 0.0026 Nm - 0.108 Nm
Rotational speed: 2,200 rpm - 2,600 rpm

... shaded-pole motors are asynchronous squirrel-cage motors for connection to single-phase alternating current. They are characterised by high reliability, long durability and absolute freedom from maintenance. ...

Power: 6 W - 250 W
Intensity: 0.1 A - 3.6 A
Torque: 0.03 Nm - 1.85 Nm

... noise, high efficiency and compact structure. The motor adopts high temperature resistant F grade copper wire and wired by high accurate mechanical system, and at the same time uses professional motor ...

Power: 6 W - 250 W
Intensity: 0.1 A - 3.6 A
Torque: 0.03 Nm - 1.85 Nm

... noise, high efficiency and compact structure. The motor adopts high temperature resistant F grade copper wire and wired by high accurate mechanical system, and at the same time uses professional motor ...

Power: 6 W - 120 W
Intensity: 0.1 A - 2.04 A
Torque: 0.03 Nm - 0.84 Nm

... noise, high efficiency and compact structure. The motor adopts high temperature resistant F grade copper wire and wired by high accurate mechanical system, and at the same time uses professional motor ...

Power: 0.06 kW - 315 kW
Torque: 0.47 Nm - 71.9 Nm
Rotational speed: 716 rpm - 2,940 rpm

Motive motors are built according to international standard regulations; each size throughout the construction forms is calculated with reference to the tables of standard IEC 72-1. Motive asynchronous three-phase delphi ...

Power: 4 kW - 315 kW
Torque: 35.83 Nm - 3,226.35 Nm
Rotational speed: 720 rpm - 2,985 rpm

... lubricators. 4, 6 and 8 poles motors drive end bearings are in fact of open roller type, in order to withstand eventual extraordinary radial loads (see paragraph "components list") provided with 3 ...

Power: 0.13 kW - 90 kW
Torque: 0.61 Nm - 580.74 Nm
Rotational speed: 651 rpm - 2,981 rpm

Delphi ATDC, AT24, ATTD and ATTD24 series selfbraking motors use one or 2 spring-pressure brakes, firmly spliced onto a cast iron shield at the back of the motor. These motors include ...

Power: 13 W - 28 W
Intensity: 1 A - 3.13 A
Torque: 0.04, 0.05, 0.065, 0.08, 0.09 Nm

Features: Brushed DC motor with permanent magnets ball-bearing Lead wires Closed zinc-plated housing with sintered bearing flanges Direction of rotation CW / CCW Multiple combination possibilities ...

Power: 15, 32, 33, 47, 52 W
Intensity: 2.75, 5.15, 3.4, 0.8, 1.8 A
Torque: 0.1, 0.15, 0.05 Nm

Features: Brushed DC motor with permanent magnets ball-bearing Lead wires Closed zinc-plated housing with sintered bearing flanges Direction of rotation CW / CCW Multiple combination possibilities ...

Power: 113, 115, 235 W
Intensity: 12.5, 6.2, 11.4 A
Torque: 0.38, 0.7 Nm

Features: Brushed DC motor with permanent magnets ball-bearing Lead wires Closed zinc-plated housing with aluminium bearing flanges Direction of rotation CW / CCW Multiple combination possibilities ...

Power: 0.02, 0.14, 0.05, 0.03 ch
Intensity: 0.22 A - 2.6 A
Torque: 0.05 Nm - 0.169 Nm

24A Series Permanent Magnet DC Motor Application Information • Performance ratings of 130V models are based on use with filtered controls. • Flange mount standard. • Models 0042 and 0049 include ...

Power: 0.125, 0.33, 0.25, 0.08 ch
Intensity: 0.71 A - 12 A
Torque: 0.23, 0.66, 0.94, 0.35 Nm

33A Series Permanent Magnet DC Motor STANDARD FEATURES • Totally enclosed non-ventilated (IP-40). • Class "F" insulation • External brush access for easy inspection and replacement. • Constant ...

Power: 0.33, 0.25, 0.5 ch
Torque: 1.06, 0.7, 1.27, 0.94 Nm
Rotational speed: 1,725, 3,000, 2,500 rpm

42A Series Permanent Magnet DC Motor STANDARD FEATURES • Totally enclosed non-ventilated (IP-40). • Class "F" insulation. • NEMA 42CZ models are class "F" rated. • External brush access ...