Level sensor switch is also known as water level switch. Use changes of magnetic system within the float with the liquid level ...
Foshan Chuandong Magnetic Electronic Co., Ltd.
Process temperature: -40 °F - 300 °F
Process pressure: 300 psi
Single Level Refrigerant Recovery Switch Yuanben Company's P/N：LS-726 and LS-988 are 80% shut-off switches for all standard 30 and 50 pound D.O.T. approved recovery tanks. P/N: LS-988 ...
Shanghai Yuanben Magnetoelectric Technology
... or on request ø 10 mm; Diameter of the float 30mm made of BUNA. Signaling via indicator Opening of the valve without liquid Protection box made of aluminum with fittings for pipe ø 8mm Simple adjustment of the ...
Process temperature: -40 °C - 85 °C
The level sensor LS20 is developed for liquid level measurement/switching using a float magnet. The level switch LS0 can be used for any tank process ...
Process temperature: -60 °C - 220 °C
... Ultrasonic Non-contact Level Switch is a redundant vibration level switch operates with “frequency ultrasonic” technology. With measurement attaches on outer wall of ...
Xi'an Dinghua Electronic Technology Co., Ltd
Process temperature: -130 °C - 560 °C
... Pressure up to PN 420 Density up to 0.43 min Liquid/gas and liquid/liquid interface detection All connection configurations Mounting with or without chamber, vertical or horizontal Electronic ...
TCEM
Process temperature: -20 °C - 100 °C
Process pressure: 10 bar
Features level switch for liquids 7 basic settings for different substances additional settings via PC and programming adapter (optional) weld-in sleeve system with modular process connectors ...
Seli GmbH Automatisierungstechnik
Process pressure: 0 bar - 100 bar
EMCO level switch type 210FN03 •Top mounted •Standard flange (bolt holes Ø 13 mm and BCD Ø 92 mm) •Wetted parts in stainless steel AISI 316 •Housing in stainless steel •Max. rod length 3 meters •Cost ...
Process temperature: -20 °C - 70 °C
... Sonar Technology Introduction The Non-intrusive level switch is a new type of liquid level monitoring and alarming device. It is mainly used to monitor the liquid ...
Level float switch for wastewater For containers of a certain size (tanks, cisterns, catch basins, pools, open wells etc.). Economical and easy to install (just pick it up inside the container). Includes 5m cable.
Toscano Linea Electronica
Process temperature: 60 °C - 385 °C
The Electronic Level Switch, manufactured by LICO Electronics Gmbh, is built with optical and acustical alarm. This switch is ideally used for industrial and marine utilization. ...
Process temperature: -40 °C - 93 °C
Process pressure: 0 bar - 82.7 bar
... function of a Liquid Level Switch is to detect and monitor liquid level in a vessel. Applications Henry Technologies’ Liquid Level ...
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 1 bar
The KV-01 is a float level switch that is characterized by its optimized usability and basic design. It is integrated with a maximum of 3 switching points that is capable of being adjusted. A free choice ...
Engler Steuer-Mess- und Regeltechnik
The SMART level regulator is a floating switch for the management of liquid level. It allows connecting electrical appliances (usually pumps, but also solenoid valves, ...
SKF Series Level Control Float Switches › As electrical parts are not n the water, safe and reliable › Operation distance adjustable with gravity part › Simple assembly › Limit switch ...
EMAS
Process temperature: -13 °F - 300 °F
Process pressure: 50, 100, 300 psi
... rising level. Normally open or normally closed switch operation is easily defined by the mounting position of the switch. When normally open the float lowers with the fluid ...
Clark
Process temperature: -10 °C - 60 °C
Process pressure: 1,013 bar
The lubricant level switches allows the operator to read the lubricant level. It is a visual indicator in the form of an oil gauge glass that is installed in most reservoirs. The float switches ...
Process temperature: -20 °C - 70 °C
Process pressure: 2, 3 bar
Float switches are used for simple limit value detection in liquids. Due to the higher density of the liquid, the float switch floats on the liquid surface. ...
Pepperl+Fuchs SE
Process temperature: -50 °C - 150 °C
Process pressure: -1 bar - 64 bar
... using a piezoelectric source. In air the vibrating fork vibrates at its resonance frequency. When it is immersed in rising liquid, the frequency and amplitude of the vibration is reduced. The change is evaluated electronically ...
Pepperl+Fuchs SE
Process temperature: -40 °C - 150 °C
Process pressure: -1 bar - 40 bar
The conductivity of a liquid medium may vary widely. Once the liquid reaches the fill limit determined from the installation height of the electrode, the liquid medium closes the DC free ...
Pepperl+Fuchs SE
Process temperature: -10 °C - 80 °C
The Samba is a low cost Level Switch specifically designed to reduce installation and replacement times. - Max. commutable power: 50 W - Max. current: 1 A - Max. Voltage: 220 Vac
Electromagnetic float level indicators use the action of a magnet fixed to the float to change the electrical status of a reed switch mounted inside the tube. As the fluid level ...
Process temperature: 80 °C
The NIVA Level Controller MS1 is the ideal solution to control liquid levels with limited switching space, e.g. in: - Pump stations - Wells - Pump chambers The NIVA Level ...
Process temperature: -20 °C - 70 °C
The RG Series Level Sensors have been designed to indicate the presence or absence of bulk materials such as grains, pellets, chemicals, wood chips and other powders. The detection of material is achieved by a rotating ...
Valco Melton’s Low Level Glue Control is used with probe assemblies, which are designed to fit drums, vats and pressurized tanks. The solid-state system incorporates no moving parts. It consists of a low-level ...
Process temperature: -40 °C - 125 °C
... the sensing tip is immersed in liquid, the infra-red light from the Optomax Digital level switch escapes making the output change state. The sensor can detect the presence or absence ...
Process temperature: -40 °C - 125 °C
High Performance Liquid Level Switch - SST LLHP-Range Rugged Level Sensors for Aggressive Environments Features • Designed for applications requiring a robust metal ...
Process temperature: -40 °C - 125 °C
Industrial Liquid Level Switch - SST Optomax Industrial Range Industrial Grade Level Switch Sensors ...
Please specify:
Help us improve:
remaining