Gossen testers

Proxy Tester is a portable instrument created to satisfy the needs of both installers as well as retailers. It makes it possible to control correct functioning of any D.C. sensor or magnetic sensor even when lacking expensive ...

PW-VP50 CT Polarity checker is the favorable meter which can be used for field CT and transformer polarity test in power plants, substations and any other application which may need to check the polarity. There are 2 units included in ...

FT3000 HVDC Power Filter Characteristic Tester has the functions of automatic sweep harmonic signal output, A-F and P-F characteristic measurement/display etc. It can perform HVDC Power Filter Testing and is mainly used ...

Vibration tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is ...

External Short Circuit Tester is used for UL2580 and ECER100 test standard Test object: battery pack and system Test conditions: The test temperature should be at 20±10℃or higher. (According to the battery system ...

battery crush test tester for UL1642 UN38.3 UL1642 This battery crush tester is used for battery crush tests. This battery testing equipment simulates the conditions of the battery crushing and displays ...

battery flammability tester The flammability tester is also called flammability test machine,it is used for lithium-ion battery packs for handheld electronic products, lithium-ion battery packs for portable ...

... the purchaser Increase the stability of merchantable coal quality, as well as revenues for suppliers using Portable Coal Tester Prevent unqualified coal into the factory and avoid loss for coal customers Decrease ...

Product introduction: The thermal conductivity meter uses the transient plane source technique (TPS). Test performance is stable and data processing and analysis capability is high, can be used for thermal conductivity measurement of ...

For plastic films, laminated films, fabrics, leather, solar cells, building materials and other materials, as well as the vapor permeability test of tableware, health, medical, textile and leather, and other fields of materials. Working ...

... broken IP splashproof membrane control panel with emergency stop button Description The Multitest-itensile and compression tester is driven by software installed on a computer. Its offers both consistency and reliability ...

This machine is used to test heat-sealed plastic and metalloplastic tubes, doypacks, bags and other packaging, directly on the production line or laboratory. Why do you have to test your weld ? During heat sealing, weld defects may ...

The ATS-Booste tube crusher allows to test, by crushing, the resistance of samples such as bags, pouches, promotional samples, doypack… up to 2000N. Equipped with adapted and customisable pressers. This 100% pneumatic device requires ...

The EMF-701A is a magnetic field tester manufactured by TECPEL®. This device is used for fast, dependable, and simple measurement of electromagnetic field radiation levels around home appliances, industrial equipment ...

PHS-865 non-contact phase sequence tester. Designed to check a wider range of three-phase power supplies. One machine with two functions: phase loss and phase sequence detection. Non-contact detector clamp. There is no ...

It has the dual functions of detecting lack of phase and phase sequence. Clamp the alligator clip to the outside of the power cord to detect Comes with four powerful magnets 1. Phase sequence detection (positive phase, anti-phase, ...

ISTA 3A 6A Amazon Vibration Test Bench can complete sinusoidal vibration test and broadband random vibration test respectively, and can complete classic (half sinusoid, trapezoid, back peak saw tooth) pulse and shock response spectrum ...

Application: Mechanical Shock Tester is mainly used for small products for impact test, to assess the product's ability to withstand shock damage. It is often used in electronic components, electronic circuit boards ...

Application: Half Sine Shock and Bump Tester for Battery is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., ...

GBW-60B Computer Control Cupping Testing Machine GBW-60B computer control cupping testing machine mainly for the test of the metal sheet and strip, according to the national standard GB / T 4156-2007, it can test the plastic deformation ...

BT-60 Manual Cupping testing machine Cupping testing machine, designed according to GB/T 4156-2007, is used to evaluate the resistance of metal materials to the anti-cracking or anti-separation of metal substrates after being subjected ...

With unmatched precision, speed, and versatility ERAVAP is the instrument of choice for vapor pressure testing of e.g. gasoline, crude oil, LPG, solvents, fragrances, or aqueous solutions in full compliance with the latest international ...

ERAFLASH X is the future-proof replacement for ASTM D93 Pensky-Martens testers. Tailored for the petroleum industry all kinds of liquids can be tested over the wide temperature range of 18 °C to 370 °C using only 2 mL ...

ERAVAP FOR CRUDE OIL is the leading solution for high precision vapor pressure and density (ASTM D4052) testing of live and dead crude oils according to ASTM D6377, IP481 and GOST 52340. Its unique cell design allows high shaking speeds ...

... clamps on both sides, moves at the same speed, and evaluates the resistance on the object. This adhesion and peeling resistance tester is simple to use and contains the ability to measure a wide range of contents.

The 14S provides immediate, accurate readings of many types of property measurements. By being able to measure static and dynamic friction coefficients, adhesion, scratch hardness, stickiness, tensile strength, and peel resistance with ...

Disk-on-disk and ball-on-disk friction coefficients and abrasion can be measured with the H20. A disk or ball indenter is loaded onto the test piece and connected to a highly-sensitive straingauge. As the turntable rotates, the load is ...

... provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides ...

6080A BATTERY POWERED PAT TESTER • Standalone battery operation • 230V and 110V appliance testing • Visual pass/fail test indicator • Bond current @ 25A/10A/100mA • Insulation resistance @ 500V ...

... • Leakage Current @ 230V Re-defining rapid safety testing, the Transmille 5080 battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house ...

The HVA28 and HVA28TD are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA28TD device includes integrated Tan Delta diagnostics capabilities, in comparison to HVA28 device, which can ...

... diagnostics unit enables a straightforward condition assessment of the cable system. The new HVA68TD is more than just a VLF tester. In addition to VLF testing & Tan Delta diagnostics capability, it allows to pre-locate ...

The HVA34-1 and HVA34TD-1 are truly compact and portable VLF test sets which determine the condition of medium voltage cables. HVA34TD-1 device includes integrated Tan Delta diagnostics capabilities and features TD leakage current correction ...

MINIVAP VP Vision is a highly versatile portable vapor pressure tester that features best-in-class precision and a pressure range of 0-2000 kPa. It is the first analyzer that demonstrates excellence in engineering by ...

... Up to 2 different sample streams can be connected to one single analyzer. It is the only available process vapor pressure tester that fully complies to the industry relevant ASTM standards for gasoline (ASTM D6378), ...

The flash point tester MINIFLASH FP Vision is uniquely designed to determine the flash points of liquids and solids. The analyzer uses Grabner flash point detection method, which is triggered by an energy-controlled electric ...

The CRIT 100 controls the charge of static electricity and the insulation of operators and equipment before entering a pyrotechnical area, where user’s safety is at stake. Dual detection of resistance thresholds: • Maximum value ...

EASYLAN is a powerful LAN tester for certification of copper cables, optical cables and networks up to 30 MHz. It stores up to 1,700 tests managed by sites and enables users to issue comprehensive certification reports ...

Quick λ Thermal Conductivity Tester The HC-10 Quick λ Thermal Conductivity Tester is super fast, reliable, and portable, designed to measure the thermal conductivity of a wide range of homogeneous ...

The Raptor-HV, also called the high voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of a moderately high AC voltage. This product can work only in combination with a Raptor Master ...

Temperature controlled battery short circuit tester This equipment is designed based on the requirements of various battery short-circuit test standards. According to the standard requirements, the short-circuit ...

MIT folding tester MIT folding tester is a special instrument for measuring the folding fatigue strength of paper, cardboard and other sheet materials. According to the international common MIT folding ...

The battery pack external fire test machine is mainly used for the safety verification test of PACK level battery packs or systems and structural parts, and is used to evaluate the safety performance of the battery. The external fire ...