Greyline Instruments level sensors

Level range: 600 mm - 6,000 mm
Process pressure: 0 bar - 16 bar
Process temperature: -40 °C - 85 °C

The level and environmental sensor based on the magnetostrictive measuring principle VISY-Stick is a fill level and environmental sensor which is especially suitable ...

Level range: 600 mm - 5,000 mm
Process pressure: 0 bar - 16 bar
Process temperature: -40 °C - 85 °C

The Highly Precise Level and Environmental Sensor Based on the Magnetostrictive Measuring Principle VISY-Stick Advanced is a level sensor of the highest precision ...

Level range: 1,000 mm - 22,000 mm
Process temperature: -40 °C - 85 °C

... Cost-Effective Installation The sensors corrugated hose is stretched by a weight and a magnet which affixes itself at the bottom of the tank. Tried & Tested VISY-Stick Flex systems offers high accuracy tank level ...

Level range: 35 cm - 600 cm
Process temperature: -40 °C - 85 °C

DUT-E fuel level sensor is designed for precise measurement of fuel level and fuel volume in vehicle tanks, vessel tanks, also in storage cisterns, tank of diesel generators and boilers/burners. DUT-E ...

Level range: 70 cm - 600 cm
Process temperature: -40 °C - 85 °C

... detects new fuel type in fuel tank and adjusts measurements results. This feature allows to give fleet manager accurate data on level and volume of fuel in the tank, correctly detect tank refilling and fuel draining volumes. ...

Level range: 70 cm - 600 cm
Process temperature: -40 °C - 85 °C

DUT-E GSM is a "2-in-1 solution", which combines features of fuel level sensor and telematics unit (GPS tracker) in one body. DUT-E GSM is a fuel level sensor with built-in ...

Level range: 0 m - 50 m
Process temperature: -30 °C - 70 °C

wireless water level sensor with GPRS is designed to detect the liquid level,and report level data to Cloud server at set interval when measured level ...

Level range: 0 m - 500 m
Process pressure: 0 bar - 50 bar
Process temperature: -40 °C - 80 °C

The Submersible Water Level Sensor is commonly known as "level probe", it is mainly used for water level, water pressure and hydrostatic level measurement. ...

Level range: 0 m - 15 m
Process temperature: -40 °C - 80 °C

UE3003 is an ultrasonic level sensor. It offers accurate non-contact liquid level and distance measurement using sound waves. With its compact design and high accuracy, it is suitable ...

ArcoFILL is the ultrasonic filling sensor that remotely monitors the filling level of waste collection containers. The sensors are also set to transmit: temperature possible ...

Process pressure: 0.8 bar - 1.1 bar
Process temperature: -20 °C - 70 °C

Capacitive sensor without moving parts based on the principle whereby the electrical capacitance of a capacitor is detected. The instrument is supplied with a standard setting enabling it to perceive material at a distance ...

Level range: 1,000 mm
Process temperature: 14 °C - 158 °C

Conductive level sensor designed to independently monitor two level switch thresholds for liquids. Also enables a signalling delay to be set. Current flow between two electrodes immersed ...

Level range: 0 m - 150 m
Process temperature: 0 °C - 70 °C

Hydrostatic level sensor measures the level with the help of liquid pressure, It transfers information to the control equipment by converting the pressure value formed at the liquid ...

Level range: 4 m
Process temperature: -20 °C - 80 °C

+- 30% / 2W Max. 300mA M68*20 Connection 0.25-0.5 Sensitivity 0.02% Resolution, Max. 4 Meter Measurement Adjustable Blind Spot <100mm 15° +/- 2° Measuring Angle Free PC Software

Level range: 10 m - 30 m
Process pressure: -1 bar - 3 bar
Process temperature: -40 °C - 130 °C

Margin of Error: ±5 mm Process Connection: Threaded G1½ A or OPS. 1½ NPT, Flanged from DN 50 Operating voltage: 14… 36 V DC

Process temperature: -40 °C - 100 °C

... Performance ASIC based compact Sensor • Build in 100ms Power On Delay eliminate false trigger when power up • Self-Recover Short Circuit protection on NPN/PNP output, Reverse Polarity and Over Voltage Protection on ...

Level range: 12 mm
Process temperature: -40 °C - 100 °C

The optical liquid level switch consists of an infrared LED and a receiver. In air, the light beam from the infrared LED is reflected back into the receiver. When rising liquid touches the tip of the sensor, ...

Process temperature: -40 °C - 100 °C

Optical liquid level switches use the light reflection principle in the prism to detect whether there is liquid at the installation position of the sensor. These optical level sensors ...

Process temperature: 5 °C - 60 °C

... configurations of the ultrasonic sensor available: - The SONOCHECK ALD01 is a single-channel sensor with one measuring point which monitors reliably a specified liquid level. - The ...

Process pressure: 20 psi

... WLM-Sensor maintains the liquid in a container to a specified level without the use of electricity. Only a pressurized supply source is needed. Water is the typical application, but other liquids ...

Range 10-180 Ω Flange Ø 70 mm Flange holes 5 holes Bolt circleØ 54 mm Float Ø Ø 42 mm Float material NBR Holes Ø 5,25 mm Max voltage 28 VDC Customization Other lengths on request calibration

Range 300-10 Ω Flange Ø 70 mm Flange holes 5 holes Bolt circle Ø 54 mm Float Ø Ø 42 mm Float material NBR Holes Ø 5,25 mm Max voltage 28 VDC Customization Other lengths on request calibration

Level range: 0 m - 100 m

Level switch fitted on the inside of the tank to activate a remote and/or local alarm when the tank requires refilling.

... content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration -Permanent, highly precise residual oil measurement (oil vapor) with PID sensor ...

... mobile measurement: The PID sensor is ready for measurement within about 30 minutes -OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, ...

Level range: 0 m - 2 m
Process pressure: 1 bar - 30 bar
Process temperature: -40 °C - 80 °C

The Level Sensors have the following Features: - G3/8" to G2", Flange (round and oval) others on request - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - Grid: 5 or 10 mm - Overall ...

Process pressure: 1 bar - 60 bar
Process temperature: 0 °C - 125 °C

The Optical Sensors have the following Features: - M12, G3/8", G1/2", NPT - PVC-cable - M12-connector - NO in Air, NC in Air - PNP, NPN open collector - Temperature range upto +125°C - upto 60bar - upto IP67 - ...

Process temperature: -20 °C - 70 °C

Capacitive level controls are widely used where it is necessary to control the level of substances both solid and liquid which may not be conductive. They are particularly used in silos for cereals, foodstuffs ...

Process temperature: -20 °C - 60 °C

... circuit into a current which is used to indicate the level. APPLICATIONS Capacitive level controls are widely used where it is necessary to control with a good safety margin of intervention the level ...

Process temperature: -20 °C - 60 °C

They work on the resistivity of liquids and sense the level via the electrodes placed in the conductive liquids. The presence of liquid between the electrode (or electrodes) and the metal surface of ...

Level range: 4 m
Process pressure: 25 bar
Process temperature: 80 °C

- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C universal filters with GL connection and flow chamber LS - Connection: ø 12 mm - With 4 m electrical connecting cable - ...

Level range: 4 m
Process pressure: 0 bar - 25 bar
Process temperature: 80 °C

- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C stainless steel universal filters with condensate drain and flow chamber LS25 - Connection: 1/4" male NPT thread - ...

Process pressure: 2 bar - 11 bar
Process temperature: 0 °C - 60 °C

- Liquid sensor for conductive and non-conductive media - Integrated preamplifier in robust aluminium sensor housing - Connection: ø 16 mm with GL 25 union nut - With 1.5 m electrical connecting cable - ...

Hydrostatic level probes - Any measurement range from 1 up to 500 m H2O - Integrated internal overvoltage protection circuit - Marine certificate DNV - ATEX Intrinsic safety

Level range: 6 m

... casing head IP 67 • The UFM is an ultrasonic sensor for continuous level measurement without contact with the fluid. Advantage • Principle of measurement without contact • Options for distance, ...

Level range: 0 m - 6 m
Process pressure: 0 bar - 20 bar
Process temperature: -30 °C - 105 °C

Measuring resolution 5 – 10 – 20 mm. Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual shutdown of a ...

Level range: 0 m - 6 m
Process pressure: 0 bar - 50 bar
Process temperature: -30 °C - 105 °C

Measuring resolution 5 – 10 – 20 mm. Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual shutdown of a ...

Level range: 0 m - 5 m
Process pressure: 0 bar - 6 bar
Process temperature: -30 °C - 105 °C

Brass ─ Spansil Measuring resolution 5 – 10 – 20 mm Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual ...