Grundfos circulation pumps

Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C

... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of positive displacement ...

Flow: 11 m³/h
Pressure: 2.1 bar

... Capacitor inside the terminal box • High performance mechanical seal • 8 outlet positions • 5 terminal box positions • 3 pump purge positions (optional) • Single and three phase voltages 50Hz or 60 Hz Performances: Flow ...

Flow: 5 m³/h - 600 m³/h
Head: 14.5 m - 120 m

... centrifugal pump Product overview: CLZ vertical Marine self-priming centrifugal pumps are suitable for all kinds of ships and warships as ballast pumps, bilge pumps, ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...

Flow: 0 m³/h - 3,000 m³/h
Pressure: 16, 25 bar
Head: 0 m - 180 m

... disassembly of the rotor group for maintenance or repair without distorting pump alignment and suction and discharge piping. • Impeller is double suction. • This feature increases pump suction performance ...

Flow: 5 m³/h - 450 m³/h
Pressure: 10 bar
Head: 4 m - 100 m

... m-Drive series pumps are single stage, end suction, seal-less volute type pumps with magnetic coupling. • Single entry, closed impeller is hydraulically thrust compensated and dynamically balanced. • ...

The electronically commutated water circulation pump (WUP) with its brushless DC motor is a dependable alternative to conventional motor vehicle pumps with their wear-prone ...

Flow: 0 m³/h - 550 m³/h
Head: 0 m - 100 m

Kirloskar DB pumps are of back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. ...

Flow: 0 m³/h - 1,200 m³/h
Head: 0 m - 400 m
Fluid temperature: 0 °C - 300 °C

... mechanical seal and is compliant with API 676. Our screw pumps have numerous benefits over other positive displacement pumps such as gear pumps. They produce low noise levels, are ...

Flow: 10,000 m³/h
Pressure: 2.5 MPa
Head: 240 m

... horizontal, and foot-mounted; double-suction impeller makes the pump self-balance axial force, and the split structure makes it unnecessary to dismantle the pipeline and driver during pump maintenance. ...

Flow: 30,000 m³/h
Pressure: 2.5, 3.75 MPa
Fluid temperature: 105 °C

... )type series pump is new generation single stage double suction split casing centrifugal pump that is designed and produced by foreign advanced manufacturing technology of 1990’s 20th century. Application ...

Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm

Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec ...

FGD pump, full name is Flue Gas Desulphurization Pump. FGD pump is single stage, single-stage, axial suction, horizontal centrifugal slurry pump. It is mainly used ...

The TLR type desulfurization pump is mainly used as the pump for the absorption tower circulation in the wet FGD device, which is characterized by large flow, low lift, and high efficiency. ...

Flow: 30, 20, 60, 40 l/min
Pressure: 16 bar - 20 bar
Power: 3.81, 2.6, 1.3 kW

... piston pumps of the tim®ECO series have been especially developed for larger paint supply systems. In addition to a small, compact design, which allows integrating the pumps without ...

Flow: 0 m³/h - 550 m³/h
Pressure: 16 bar
Fluid temperature: 160 °C

... 50 Hz: 2900, 1450 min-1 60 Hz: 3500, 1750 min-1 Centrifugal pump OH1 in accordance with EN 733 (DIN 24255), closed impeller. Shaft seal with mechanical seal or packing. Pump construction using ...

Flow: 7 m³/h - 60 m³/h
Head: 21 m - 100 m
Input diameter: 1 in - 4 in

TCPOWER MOTOR PUMPS Pumps with small tanks and large capacity depending on the need. Our pumps can be: • Clean water Pumps • High pressure motor ...

Flow: 0.5 m³/h - 28 m³/h
Head: 0 m - 77 m
Fluid temperature: 0 °C - 90 °C

The Lubi MH, MHI and MHN pumps are non-self priming, horizontal, multistage, centrifugal pumps. Motor and pump are close coupled in a convenient and compact design for ...

... This could even cause the pump to become completely blocked. To maintain the temperature of the chocolate and avoid it solidifying inside the pump we recommend fitting a heating jacket to the front ...

Flow: 8 l/min - 60 l/min
Pressure: 0.21 bar - 0.5 bar
Power: 10 W - 250 W

FEATURES Centrifugal pump for re-circulating and transferring of liquids. A selection of models with pump rates of 8 to 60 litres/ min. The motor power to the turbine is transmitted via a magnetic coupling. ...

Flow: 1.5 m³/h - 100 m³/h
Power: 3 kW - 63 kW
Fluid temperature: 50 °C

WQX series of bottom suction sewage pumps are suitable for pumping sewage and sludge in any severe environment. This series of pumps are bottom suction type, which can pump surface ...

Flow: 0 m³/h - 115 m³/h
Pressure: 32, 26, 25 bar
Head: 3.7 m - 326.3 m

Franklin Electric Vertical multistage pumps are the silent partner of your daily life. The pumps are available in different metallurgies (Cast Iron, 304SS, 316SS) and in different head and flow rates. Robustness ...

Flow: 14.5 m³/h - 2,500 m³/h
Head: 6.1 m - 200 m
Power: 2.2 kW - 1,800 kW

... diesel engine drive large capacity water pumps are a double-flow, single-stage, axial split case pump. These pumps can be used in a wide range of industrial processes. In the water ...

Flow: 12 l/min - 28 l/min
Pressure: 1 bar - 8 bar
Head: 0 m - 70 m

Fluid Inlet-Outlet : 3/8'' NPT Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm Material : PTFE Valve Ball Material : PTFE Valve Seat Material : PTFE Fluid Inlet-Outlet : 3/8'' NPT Housing Material ...

Flow: 6 m³/h - 75 m³/h
Head: 7.2 m - 38 m
Fluid temperature: 95, 65 °C

... centrifugal pumps are operated by a direct-drive motor (max. 3.000 rpm). They are especially suitable for a fast transfer of chemicals when emptying containers or tanks as well as for applications when a medium has to ...