Grundfos water pumps

Flow: 0 l/min - 50 l/min
Pressure: 0 bar - 220 bar

Our Hydraulic submersible pumps HB – HC – HV are particularly suitable to drain flooded areas. As they have no electrical components, they are completely SAFE to work under water. The water ...

Flow: 324 m³/h
Head: 53 m
Power: 4 kW - 22 kW

PTE vertical chopper pump with electric motor PTEM version with adjustable mixing nozzle Multi-channel open impeller and double chopping system. Available in version with adjustable mixing nozzle (PTEM version)

Flow: 0 us gal/min - 5,000 us gal/min

The tens of thousands of pumps distributed by Smith & Loveless already, who are responsible for conveying wastewater around the world, providing reliable service every single time. The design is a bold ...

Our screw pumps are specific to pump waste, rain, drinking water and sludge. This tool, with more than 2000 years of history, has evolved and been perfected to adapt to each epoch. We ...

Pressure: 16 bar
Fluid temperature: -10 °C - 60 °C
Length: 560 mm

The pump is designed to fill tanks of PR 14 type central lubrication pumps and other pumps with plastic grease. It may be used to fill other containers with plastic grease as well. Capacity ...

A wide range of piston and diaphragm pumps are available for use with fluids from water consistencies up to pastes. Materials include: - Adhesives - Epoxies - Lubricants - Mastics - ...

... archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance ...

Flow: 0.5 l/s
Fluid temperature: -5 °C - 45 °C
Weight: 0.98 kg

Hand lever pump in plastic housing with outlet tap Telescopic suction pipe 640 - 980 mm, three-parts, for 200 l drums Dispense hose 1,50 m with outlet manifold G2" drum thread incl. Adapter for S56 ...

Flow: 13.7 l/min - 46 l/min
Pressure: 100 bar
Length: 293 mm

High-Pressure Diaphragm Pump, Hydraulic Pump, Diaphragm Pump, Gear Pump, Piston Pump, High Pressure Pump CML MPD pump ...

Flow: 1 l/min
Input diameter: 4 mm
Weight: 2 kg

The hand operated peristaltic pump is used for water sampling, or pumping 0 - 1000 ml/min. This pump has a suction head up to 9.5 metres. No cross contamination: exchangeable ...

Flow: 0 us gal/min - 210 us gal/min
Pressure: 0 psi - 2,500 psi
Head: 0'00" ft - 125'00"

... is not recommended.They operate with HT6 and HT7 power units or different source that can deliver flows to 5 GPM. The pumps are small in size, and can be bolted directly into a pipeline.

Pressure: 2,000 bar - 7,000 bar
Power: 7.5 kW - 55 kW

... Applications • Pure or abrasive waterjet cutting • Hydraulic crimping • Hydroforming • Autofrettage • Isostatic pressing • Pascalization (sterilisation by high pressure processing) etc. • Amplifies the pressure ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. ...

Flow: 130 l/min
Pressure: 0.3 bar

... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing ...

Flow: 3.17, 5.07 l/min
Pressure: 4,150, 3,800 bar
Power: 30, 50 ch

The HyPlex@ Prime pump represents the next generation of energy efficient, direct drive ultrahigh-pressure waterjet pumps. The HyPlex's direct drive delivers superior ratio of input energy ...

Having a properly sized pump and reliable water supply for the evaporation system is critical to performance. Coldmist offers a full range of pumps and water supply ...

Flow: 20 m³/h - 40 m³/h
Pressure: 0 MPa
Power: 4,000 W

◆ The water powder mixing pump is sufficiently blended with a high-speed rotating impeller to deliver the desired mixture. ◆ Uses: Suitable for milk powder, whey powder, paste powder, etc., etc., and ...

Flow: 0 m³/h - 475 m³/h
Pressure: 5 bar
Power: 0.55 kW - 30 kW

... inlet to the pump, which ensures hassle-free operations under conditions in which many other pumps have problems with clogging. A submersible pump with a unique design Due to the ...

Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW

... petrochemical products. The pumps of our manufacture present an advanced model of the pump NTsI-F-100 (НЦИ-Ф-100) previously produced in the post-Soviet countries. This is a centrifugal semi-submersible ...

... Series High Pressure Pump System - Internationally Applicable 1. Siemens three-phase asynchronous motor and Rexroth constant pressure plunger pump are combined to serve as the power unit of the system, ...

High-reliability Water Pump Developed from the Engine System Requirements The material of mechanical seals having a large role to play in preventing cooling water leakage changed ...

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 8 m³/h
Head: 25 m
Power: 1.1 kW

... Displacement : 35.8cc Power Output : 1.1kw Carburetor : Diaphragm Lift Head : 25m Suction Head : 8m Delivery Volume : 8m³/h Water Inlet / Outlet Diameter : Ø25mm G.W./N.W. : 9.2kg/7.9kg

Flow: 0 m³/h - 300 m³/h
Pressure: 16 bar
Head: 150 m

Sealless magnetic drive chemical process pump. Connecting dimensions acc to ISO 5199 Wide selection of MOC´s. Precision casted casing and impeller Hastelloy C4 can material with minimal eddy currents, one piece deep ...

Flow: 2 l/min - 17 l/min
Pressure: 12 bar
Length: 266 mm - 476 mm

BMF, BCF pumps are volumetric gear pumps suitable for transferring lubricant viscous liquids without any suspended solids or abrasive substances. They are self-priming pumps ...