HAWE valves

Temperature: 5 °C - 150 °C

Series XLA-2 are high vacuum angle valves for use in industrial applications employing high vacuum and process gases. Common industries that may use these angle valves include semiconductor, solar and ...

DN: 4 mm - 10 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 80 °C

... Product Types: •3/2 Manual Switch-Operated Valve, Supply, Maie BSPP and Metric Thread •3/2 Manual Switch-Operated Valve, Control, Maie BSPP Thread •2/2 Manual Switch-Operated Valve, ...

DN: 0.5 in - 2 in
Temperature: 14 °F - 356 °F

Save space while maintaining flow rates with the compact Series SAV-BT Angle Seat Valve. The pneumatic, externally piloted angle seat valve is operated by a single acting actuator with a mechanical spring ...

DN: 1.813 in - 7.063 in
Pressure: 10,000, 15,000 psi

... next project, Cameron frac valves provide three times more uptime compared with other suppliers, minimizing NPT and related costs. Choose the gate valve that best suits your fracturing program Designed ...

DN: 25 mm - 150 mm
Pressure: 4, 10, 6 bar
Temperature: -10 °C - 140 °C

... investment costs and optimized valve operation Space-saving inline mounting that easily connects to the piping system High process hygiene due to the use of the same components as the EHEDG-certified LKB valve Count ...

DN: 0 mm - 1,200 mm
Pressure: 0 bar - 830 bar
Temperature: -196 °C - 570 °C

Control valve manufacturing started in 1960 under the brand of Nuovo Pignone and since then, its technology has been continuously improved. With over 160.000 valves installed worldwide, compliant with ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...

Pressure: 210 bar
Flow rate: 20 l/min

The Leak Free Solenoid Valve is specifically designed to provide a good quality performance and functionality. It is built with a sub-plate or screw-in, two-way, poppet style normally used to cut off the hydraulic power. ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C

... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with ...

Applications: Single-acting cylinders. Actuation: Flipper lever-operated. Functions: Cylinder piston “advance,” “hold” and “retract.”. Used on these pumps: PE172 and PA172.

DN: 101.6 mm
Pressure: 345 bar
Temperature: -40 °C - 204 °C

The EV20-S34 is a screw-in, cartridge style, hydraulic directional element. It is a spring biased blocking valve which will shift to allow full flow from port 1 to 2 only when port 3 is vented to create a pressure drop ...

DN: 50 mm - 300 mm
Temperature: -20 °C - 93 °C

The PL4200 is axial flow and electric control valve which is composed of electric actuator and the main valve. The PL4200 receives the control signal that output by the control unit to change the spool ...

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without the need to disassemble the valve, ...

DN: 25 mm - 500 mm
Temperature: -273 °C - 450 °C

... synchronized with the safety valves -Complete, coordinated combination of one supplier with qualified resistance coefficients Bursting discs with safety valves in combination -Tight up to the set ...

DN: 25 mm - 80 mm
Pressure: 1 bar - 10 bar

... pharmaceuticals industry. Safety: The double guided valve rod of the safety relief valve guarantees reproducible functional behaviour even in critical operating conditions. Economic efficiency: The ...

DN: 20 mm - 150 mm
Pressure: 3.5 bar - 6 bar
Temperature: 135 °C - 180 °C

For control of air, water, gas, steam in textile, power generator, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryers, gas generators & others. Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this figure ...

Pressure: 100, 210 bar

2-Way Ball Valve (FxF) Working Pressures: 100 | 210 bar (1500 | 3000 PSI)

DN: 0.5 in - 6 in
Pressure: 230 psi

... solids. Type-21/21a ball valves are well suited for a wide variety of fluid flow applications. True Union ball valves can be lifted from the line, without having to move the piping, simply by loosening ...

DN: 20, 25, 40, 50 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 80 °C

... pump stop, there will be négative pressure inside of pipeline, it may happen libation or break, now the exhaust valve and air suction valve will suck air speedy, keep the pipeline safety.

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket ...

DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C

The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...

DN: 0.25 in - 2 in
Pressure: 2,000 psi

AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only),