Knuth automatic presses

Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 250 mm

Pressure regulator - • Two-speed hydraulic unit - - Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...

Force: 0 kN - 30,000 kN
Stroke: 2,000 mm
Table length: 3,000 mm

The quality of construction and components used, our wide experience and the advanced technology developed over years make our presses a reliable product. The generous sizing and our attention to détails in mechanical machining assure ...

Force: 180 kN
Table width: 770 mm
Table length: 660 mm

... Hydraulic cylinders drive the lower extensible plate outside the columns in an easily accessible position for the work outside the press. It slides on roller bearings and is laterally guided by ball bearings, completely ...

... This hydraulic press is based on RZU serieshydraulic press, using the electro-hydraulic proportional servo control technology, dynamic force control technology, balance cylinder technology, greatly improves ...

Force: 220, 300, 150 tf
Stroke: 450 mm
Max. pressure: 320 bar

... as standard which enables us to conveniently regulate the cylinder stroke. A two-speed motorized hydraulic unit with automatic high speed deactivation. It’s equipped with a cylinder decompression valve. Includes as ...

Force: 40 tf
Stroke: 300 mm
Working speed: 5 mm/s

... SEMIAUTOMATIC, AUTOMATIC AND WITH ANTI-REPETITIVE BIMANUAL PUSH-BUTTON CONTROL - COMPLETE ELECTRONIC INSTRUMENTATION BRAND "PROFACE" WITH SIEMENS PLC WITH POSSIBILITY TO SET UP UP / DOWN QUOTES / DESCENT PRESS ...

Force: 5, 12 tf

This hydraulic bumps press is designed for making single bumps with a weight from 10 to 45 kg, depending on the diameter of the cans. The bump press is semi-automatic: manual handling ...

Rate (strokes/min): 210 p/min

... market needs. Our fully automatic sheet feed press includes sheet de-stacking, alignment table with safer and more accurate sheet feeding, higher outputs and an optional zero idle strokes version. ...

Weight: 4 kg
Overall length: 436 mm

... outer 7 mm • diameter of solid copper wire 5 mm Special features: • efficient Li-ion battery • automatic retraction when pressure is achieved • automatic off switch ending cycle after proper crimping is complete

Force: 1,000 kN

... occurs in just a few minutes, thanks to a state of the art technical solution, as well as the production control system with automatic discarding of faulty pieces. The hydraulic presses are available in different series ...

Force: 30 tf
Stroke: 380 mm
Table width: 325 mm

Ideal for assembly and straightening work, but also ideal for setting up tools, during load tests and for workpiece checks Table height adjustment by means of chain and working cylinder Piston feed either trough hand lever or sensitive ...

Force: 200 kN - 1,500 kN
Table width: 200 mm - 460 mm
Table length: 360 mm - 980 mm

HPB series hydraulic press are used for assembling, dismantling, alignment, calendaring, tension, bending and punching. The machine supplied oil by Italy CNK and CBZ pump. It could save 60% energy compared with the traditional ...

Force: 1, 10, 20, 30, 50 kN
Stroke: 100, 200, 300, 400 mm
Approaching speed: 200, 150, 300 mm/s

The Robot Press L-Series is a line of lightweight press systems intended for use as end effectors in robotic assembly applications. The Robot Press is intended for use in flexible ...

Force: 2,000, 1,100, 1,600 tf

... High-rigidity steel-welded frame • High-sensitive hydraulic overload protection • Automatic oil cycle lubrication system • Optional components: output shaft, air cushion, slider knockout, automatic ...

Force: 600, 800 tf
Stroke: 200 mm
Hydraulic pump power: 28, 30 kW

The automatic stone imitation PC brick machine and its production line adopt high-pressure hydraulic molding and complete the filter-press molding of cement-containing aggregates through pressure. The ...

Force: 33 tf - 275 tf
Stroke: 16 in
Weight: 4,409 lb - 30,865 lb

... Presses Produced Up to 275 Tons Capacity Used to Bend, Hole Punch, Cut and Straighten Use Smaller Die Cuts Automatic or Manual Produced up to 275 Tons capacity, C type presses are normally of standard ...

Stroke: 100 mm
Weight: 96 kg

Ultrasonic welding press model E-STR1 is a solid ultrasonic welding machine, ideal for applications where high precision is required. Discover all the advantages of the E-STR1 20 ultrasonic press. Eliminate ...

Force: 800, 1,000, 12,500, 1,500 tf
Opening: 1,200, 1,400, 1,700 mm
Stroke: 700, 900, 1,000 mm

... température of EPDM are controlled accurately. 5. - The tire bladder press part demoulding device on the rubber injection machine. Blowing and pressing device under high pressure, automatic demoulding ...

Force: 40 tf

The Servo press are for applications that require a high precise positioning at high forces. The servo press is 100% electric controlled by gear – servo. With this green technology deletes all physical ...

... for those who want to press it. The packaging is made using a roll of upper and lower polyethylene with a height of up to 2,900mm A slight push is enough and the mattress automatically finishes its packing cycle. The ...

Force: 800 kN - 6,300 kN

... specific customized functions (hydraulic and hydromechanical cushions, pneumatic blankholders, adaptions for automatic production, automatic tool-change equipment (SMED)...)

Force: 100 kN
Rate (strokes/min): 190 p/min
Stroke: 8 mm - 52 mm

... Pneumatic system composed of: tank, safety valve, filter, dual solenoid valve with dynamic control, pressure switch Centralized automatic lubrication with adjustable flow Control board complete with programmable stroke ...

... safety limiter in both up and down directions. 5.Equipped with photoelectric protection device, could guarantee the safety of the operation. 6.With the function of automatic and manual, it's convertible. 7.Two ...

Force: 12,500 kN
Opening: 500 mm - 1,000 mm

... price/performance ratio. Equipped with state-of-the-art control technology and individual automation options, we can adapt any press to your needs and wishes.

Force: 0 N - 30,000 N

... vibrations and shocks to all the press components and if the machine is not properly designed and manufactured vibrations can generate a deterioration to the main parts in the time. Automatic stroke ...