Process temperature: -20 °C - 60 °C
Precision: 0.4, 0.2 %
... electromagnetic flowmeter is completely autonomous with advanced functionality. Its benefits are flexible installation, high-precision volume measurement, and worldwide transmission of measured data via Modbus RTU protocol. ...
Arkon Flow Systems
Process temperature: -23 °C - 60 °C
Volumetric flow rate: 0 m³/h - 40 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 6.3 MPa - 25 MPa
... INTERFACE (OPTION) Turbine Flow Meter - liquid applicationsINDUMARTCanada www.indumart.com Indumart FTT20 series of Liquid Turbine Flow Transmitters are accurate instruments ...
Indumart
Process temperature: -10 °C - 60 °C
Precision: 0.2 %
... entire sensor body at equal area, measure and report the average flow rate over the full diameter of the pipe. The specific design of the multi-electrode sensor compensates for variable flow profiles, ...
Flow-Tronic S.A.
Process temperature: -200 °C - 300 °C
Process pressure: 250 bar
Precision: 0.1, 0.2, 0.5 %
... fixed frequency. Once there is flow passing through the pipes, Coriolis force will give rise to deflection (phase shift) on the vibration of two pipes and the deflection of vibration is directly proportional to the mass ...
Shanghai Yinuo Instrument Co., Ltd
Process temperature: -40 °C - 350 °C
Process pressure: 1.6 MPa - 4 MPa
Precision: 1, 1.5 %
... series Vortex Flow Meter can be used to detect and measure the flow of all kinds of gas, fluid and steam. 1% accuracy stainless steel steam gas liquid fluid vortex flow ...
Volumetric flow rate: 20 l/h - 640,000 l/h
Process temperature: 0 °C - 120 °C
Process pressure: 0.1 bar - 11 bar
Magnetic-inductive flow meter VOLUMTEC Construction according to hygienic design standards, all Measurement in both flow directions Adjustability of the illuminated LC-Display Self-monitoring ...
Process temperature: -20 °C - 250 °C
Process pressure: 1.6, 4, 1 bar
Precision: 1, 1.5 %
Power stations and other energy factories Technical the inside diameter ofDN - DN10…DN300 Measuring range - 0.4...100m/s Operating Voltage - 220VAC±10%;24VDC±10% sensor material - 316SS (1.4404),ceramics Junction box shell material ...
Magnetic Flow Meter The third most common flow meter is the magnetic flow meter more commonly just called a mag meter. ...
Flowtech Measuring Instruments Pvt. Ltd.
Volumetric flow rate: 5 m³/h - 2,400 m³/h
Process temperature: -40 °C - 200 °C
Process pressure: 0 bar - 200 bar
... is very suitable for opaque, corrosive or dangerous fluids used in most industrial processes. Its robust design enables the flow of viscous fluids or gases to be measured under particularly severe operating conditions. Indication ...
Volumetric flow rate: 0 l/min - 50 l/min
Process temperature: 5 °C - 55 °C
Precision: 2 %
... indicates the flow rate. KOFLOC provides flow meters with a valve that can perform both measurement and control of the flow rate, flow meters ...
KOFLOC Corp.
Volumetric flow rate: 0 m³/h - 600 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 40 bar
MTCMF Mass Flow Meter Overview Coriolis mass flow meter (MTCMF) is a new type flow meter which is designed according to Micro Motion ...
Process temperature: -40 °C - 70 °C
MULTIPHASE FLOW METERING Flowatch 3I The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water and gas ...
PIETRO FIORENTINI
Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar
... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning ...
Process temperature: -40 °C - 350 °C
... away from the flow meter when the meter location is in poor access areas or in higher temperature applications. When the alarm is triggered the display flashes until the alarm setpoint ...
Metri Measurements
Volumetric flow rate: 0.1, 0.2, 1 l/s
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar
The ultrasonic flowmeter in beverage dispensing systems for alcoholic and nonalcoholic drinks. The contact-free flow measurement with no moving parts is wear and maintenance free. The free pipe cross-section ...
MIB GmbH Messtechnik & Industrieberatung
Process temperature: 4 °C - 57 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
The Q-Eye PSC area velocity flow meter is designed for stationary flow monitoring of slightly to heavily polluted media in full or partially full pipes or open channels. It uses advanced ...
GWF
Condensation Checker – PSH Check your humidity, avoid moisture Protect your equipment from moisture improving OEE – Monitoring of relative humidity and temperature Optimise your installation space – Sensor and display in a single unit Enjoy ...
Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: 0 °C - 65 °C
Process pressure: 10 bar
Flow rate control and monitoring for oil circulation lubrication systems The SKF Flowline Monitor is used to divide, measure and control the flow rate in oil circulation lubrication systems. Three different ...
Volumetric flow rate: 0.1 l/min - 40 l/min
Process temperature: 0 °C - 70 °C
Process pressure: 16 bar
... circulation systems SKF Variolub SMD flow meters are designed to meter and monitor the flow in oil circulation lubrication systems. They are offered in three different ...
Volumetric flow rate: 0 l/min - 56 l/min
Process temperature: 0 °C - 70 °C
Process pressure: 15 bar
... use in oil circulation systems SKF Safeflow flow meters control and indicate the flow rate. Each flow meter can be calibrated individually according ...
Process temperature: -10 °C - 90 °C
Inline Sensor with Integrated Processor Compact inline flow sensor Calorimetric principle Monitoring of flow rate Monitoring of the medium temperature For ...
Volumetric flow rate: 0 l/min - 2,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar
The range of Metal Work FLUX Series Flowmeters gets expanded with the introduction of the new sizes 1 and 2 having flow rates, respectively, of up to 2,000 Nl / min and of up to 4,000 Nl / min. The ...
Volumetric flow rate: 0 l/min - 4,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar
The range of Metal Work FLUX Series Flowmeters gets expanded with the introduction of the new sizes 1 and 2 having flow rates, respectively, of up to 2,000 Nl / min and of up to 4,000 Nl / min. The ...
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after ...
PCE Deutschland GmbH
Process temperature: -30 °C - 160 °C
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, ...
PCE Deutschland GmbH
Process temperature: -40 °C - 60 °C
... cut them open. This enables the flow meter to be installed even during operation. Another special feature of the flow meter are the different outputs. It is possible ...
PCE Deutschland GmbH
Volumetric flow rate: 0.2 m³/h - 95,560 m³/h
Process pressure: 1.6, 1, 0.6 MPa
... SMT) are implemented to improve the reliability. Electromagnetic flow meter technical parameters Display: reaches 8element liquid crystal display, current clock to indicate flow ...
Process temperature: -20 °C - 80 °C
... station. FLYGT FLOW METERS The MagFlux electromagnetic flow meters combine high accuracy, stability and low maintenance to deliver linear readings over a large ...
Process temperature: -10 °C - 70 °C
Precision: 2 %
The IFM device is an in-valve electromagnetic insertion flow meter that adds an accurate flow measurement functionality to any BERMAD control valve. Perfectly suitable for flow ...
BERMAD CS Ltd
Please specify:
Help us improve:
remaining