KUHNKE valves

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

Pressure: 40 bar
Temperature: -40 °C - 150 °C

... Gas, Chemical, Water Treatment DESCRIPCIÓN: FEATURES Connections: NPT (ANSI/ASME B1.20.1) and ISO 7 Rp Materials: These valves are supplied in nickel plated finish, for ISO 7 Rp thread. Brass 58 body. Ball made of ...

DN: 0.5 in - 8 in

Split body, Full bore Flanged connections Blowout-proof stem Non-removable antistatic devices Cavity pressure balancing hole Live Loaded Packing STANDARDS API 6D PED Quality Standard MSS SP 55 All wetted component materials meet NACE ...

Pressure: 0 bar - 500 bar

... actuated ON-OFF Valves Designed to be used in steel working and metallurgical industries Stroke regulation up to size 09 Very Smooth valves response (No shocking impact) Easy maintenance Metal to ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve ...

DN: 2 in - 48 in

Reliable operation Longer wear life Open Body Design ejects material from the bottom and prevents the gate from jamming 100% bubble tight seal Reduced operation costs Applications Mining and mineral processing Mineral Sands Cement Sand ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...

The Model DGV Deluge Valve is designed for use in controlling water flow to deluge, pre-action or foam-water type fire protection sprinkler systems. This valve is UL Listed in Special Systems Water Control ...

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased ...

DN: 0.5 in - 10 in

Ball valves have 4 different types of bodies: Welded: they guarantee the absence of leaks during the valve lifetime and do not require operational maintenance. This can be a very important ...

The “singold” Flap Shutter is used for all kinds of bulk material and solid-liquid mixtures, when the container is to be completely emptied. Examples: Container scales, container, primary and secondary vessels in mixing plants, wagons, ...

DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar

STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...

Pressure: 0.3 bar - 3 bar

... CHARACTERISTICS Flame failure valve by thermocouple with pilot outlet : Double beat valve or without pilot outlet : single beat valve. Gas shut off after 1 minute of flame extinguishing. Modèles ...

DN: 0.375 in
Pressure: 46 bar
Temperature: -40 °C - 120 °C

• Differential valves are mounted on refrigerating and air conditioning installation oil receivers. • They maintain permanent oil receiver overpressure versus the compressor sumps in order to ensure constant oil distribution ...

DN: 50 mm - 600 mm

Ductile Iron Full Lug Butterfly Valves Size: 2 to 24 in. (50 to 600mm) Description: These soft-seated butterfly valves are designed for a variety of general applications in the control of water, air, ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C

... which eliminates the danger of water hammering to the piping system. Series PVS100 angle seat valves are more cost effective than equivalent actuated ball valves, while providing a significantly longer ...

Pressure: 20, 60 bar

The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet.

DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min

... FPSB series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow control valve ...

Single Loop control valve with pressure ranges from vacuum to 300 psig Small and compact package Standard 0-10Vdc analog monitor output, 4-20mA optional IP65 Housing Proportion-Air's most versatile pressure ...

DN: 1, 0.75, 0.5, 0.25, 0.375 in
Temperature: 0 °C - 100 °C

BUENO's PTFE Needle valve is Designed with simplicity and easy of installation. Excellent chemical resistance Ideal for use with instrumentation fitting as a sample valve Wide ...

Pressure: 0.5 bar - 16 bar

... semi-automatic drain valves, fully automatic externally fitted drain valves A or B, and fully automatic internally fitted drain valves) can be mounted as an option. Manual Drain ...

Morsello Inox's Ball Valve has been engineered with an integrated ingot, complete with a full bore and a solid ball. The valve showcases a 180-degree opening spindle that enables manual operation, a PTFE-material ...

DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium Hydroxide, Bases ...

DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C

Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing ...