Lincoln pumps

Carbon black feeding pump, independently researched and developed by Doright, is a new product of improving feeding stability of carbon black granulator. Carbon black feeding pump is consisted of ...

Flow: 80 l/min - 660 l/min
Pressure: 20 bar - 25 bar
Power: 30, 7.5, 4, 22.5, 15 kW

... Dosanova offers a variety of efficient pumps e.g. for: wash-down systems, CIP systems, trolley washers,... The thoroughly tested range is built on more than 60 years of experience and includes very compact ...

Flow: 0 m³/h - 200 m³/h
Pressure: 24 bar
Fluid temperature: 100 °C

Food-safe pumps with a large suction chamber. Made in polished AISI 304 and/or 316 stainless steel for transferring products of low/medium viscosity.

Pneumatic dosing pump made of stainless steel AISI 316 for doling out chemicals and fluids Main Features Stainless-steel in AISI316 (1.4408) Double- and single-acting versions Seals in PTFE and FPM Packing in ...

Flow: 0.018 l/min
Power: 70 W

... TOC as well as delivery and metering. The pump is driven by a stepper motor or AC motor and can be fitted with 1-6 channels. It is easy and functional to use. Specifications of Perimax 12 - Pump ...

Flow: 1,500 l/min
Power: 65 W

... FEATURES Small foot print, bench top. Silent and free from vibrations. Pump tube held by a simple clamp Glass dosing tip “PECIPUMP” provides precise dispensing. Dispense rate: The pump ...

DK pumps are recommended for pumping water and fluid which are not chemically aggressive to the pump components. The open impeller design enables fairly large amounts of impurities to be pumped without ...

Flow: 10 l/min - 150 l/min
Pressure: 7 bar
Head: 15 m - 62 m

Self-priming horizontal multistage stainless steel pump suitable for domestic use, also in combination with autoclave tanks. Suitable for irrigation, drinking water or glycol distribution, water treatment, heating and ...

Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch

For neutralization and removal of acidic condensate produced by high-efficiency combustion equipment. When not neutralized, acidic condensate has the potential to harm the environment and any plumbing it comes in contact with due to its ...

Flow: 9 m³/h - 2,500 m³/h
Head: 12 m - 465 m
Power: 7.5 kW - 410 kW

... has simple structure with motor and pump integrated, easy to install, maintain or disassemble, covers little floor space. It works safely and reliably, causes no pollution to water source. QJ Deep Well Submersible Pump ...

Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m

... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...

Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm

... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...

Flow: 4 m³/h - 400 m³/h
Pressure: 1.6 MPa
Head: 20 m - 125 m

... with a high specific gravity. The YQMPS type pump is a YONJOU standard pump for all the applications listed. The YQMPS type pump can be customized with a heating cavity (heating ...

Flow: 18, 15 l/min
Pressure: 8 bar
Head: 1 m - 70 m

Product Code : A8-A1-1 Fluid Inlet-Outlet : 1/4'' NPT Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm Material : PTFE Valve Ball Material : PTFE Valve Seat Material : PTFE Product Code : A8-AS-1 Fluid ...

Flow: 0.1 m³/h - 300 m³/h
Pressure: 0 bar - 48 bar

As sludge transfer pumps, the K range is high performance industrial progressing cavity pumps. This PCP, available in block or long coupled configuration, can be manufactured in different materials including ...

Flow: 9 us gal/min - 215 us gal/min
Head: 15 m - 92 m
Power: 0.08 ch - 5 ch

The T-Mag AM Series Mag Drive Pump consists of three sizes of a Mag Drive Pump, the 1/12, 1/4 and 1/3 HP. The fractional sizes are for low flow applications looking for a compact and ...

Flow: 3.2, 3.7, 4.3 m³/h
Power: 0.37, 0.55, 0.75 kW

... Waiter Pumps Suction lift up to 9m with foot valve. - Maximum operating pressure: 8 bar. - Maximum ambient temperature: +40℃ . - Liquid temperature up to +60℃. - Maximum altitude +1000m. Introduction Selfpriming ...