Lincoln self-priming pumps

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

Flow: 0 m³/h - 45 m³/h
Power: 4 kW - 22 kW
Weight: 56 kg - 180 kg

Industrial Centrifugal Pump FL30CI FL30C industrial centrifugal pumps are used mainly for decanting liquids in the food, chemical and winery industries. The simplicity of the pump parts ...

Flow: 0 m³/h - 90 m³/h
Power: 0.55 kW - 2.2 kW
Weight: 65 kg - 180 kg

... food / sanitary centrifugal pumps are used mainly for decanting liquids in the food, pharmaceutics and cosmetics industries. The simplicity of the pump parts allows straightforward maintenance. The level ...

... method for servicing pumps, as they restore pump performance, lower replacement costs, and minimize downtime. Cartridge kits for VQ series, V series, and PVL series vane pumps are designed ...

Flow: max 560.0 m³/h
Pressure: 0 bar - 12 bar

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...

Flow: 0.02 m³/h - 7 m³/h
Pressure: 20 bar
Fluid temperature: -30 °C - 140 °C

... in the product chamber. Pump disassembly is easily carried out by removing all pump component connections outside the product chamber. Benefits and Characteristics excellent dosing accuracy low dead ...

Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar

... speed high priming capacity long service life compact construction based on modular principle for high flexibility consistent modular principle simplifies the handling of spare parts optionally with ...

Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm

... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...

Flow: 0.12 l/min - 1.52 l/min

Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...

Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m

... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...

Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C

- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: ...

Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C

- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw ...

Flow: 320 l/h
Pressure: 0.4 bar - 2.5 bar
Power: 65 W

- Full PTFE bellows pump - Explosion-proof version according to ATEX suitable for gases of zone 1 and for mounting in zone 1 - Pump head can be rotated in 90° steps and connected to the gas line from ...

Close-coupled Centrifugal Pump for sea water and hot spring Spec Type:Other Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 ...

Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m

Close-coupled Centrifugal Pump for sea water and hot spring Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 material. It is anti-corrosive, ...

Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m

Close-coupled Self-priming Pumps Spec Type:Other Key Features Features: 1. Close-coupled design, small size, space-saver,high efficiency, easy maintenance. 2. ...

Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for ...

Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for ...

Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W

Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for ...

Flow: 40, 440, 320, 190 l/min
Pressure: 1 bar - 7 bar
Length: 215 mm

... reach a long-lasting performance. Advantages Atex certified Ex II 2 G c IIB T4 Low starting pressure Small and compact design Fast priming and immediate product flow Adjustable ...

Flow: 120, 230, 300 l/min
Pressure: 1 bar - 7 bar
Length: 190, 200 mm

... reach a long-lasting performance. Advantages Atex certified Ex II 2 G c IIB T4 Low starting pressure Small and compact design Fast priming and immediate product flow Adjustable ...

Flow: 150, 110, 70, 20 l/min
Pressure: 2 bar - 12 bar
Height: 680 mm

The proven performance of self-priming piston transfer pump allows accurate handling and transfer of a wide range of fluids, guaranteeing efficient operation, maximum productivity and ...

Flow: 10 m³/h
Pressure: 4 bar

LOW PRESSURE HOSE PUMPS Reduce maintenance downtime... Suitable for pumping and dosing low or high viscous, pasty, pure, neutral, aggressive or abrasive liquids, those containing gases or which tend to froth or those ...

Flow: 150 m³/h
Pressure: 15 bar

HIGH PRESSURE HOSE PUMPS The latest design PT pumps combine the best available materials with smart design solutions in order to maximise running time and minimise maintenance. The PT series pump ...

Flow: 0 m³/h - 51 m³/h
Power: 2.2, 4, 5.5, 7.5 kW

... SERIES SELF-PRIMING CTS is an open impeller self-priming centrifugal pump, manufactured from AISI 316L stainless steel.The self-priming feature allows ...

Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...

Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...

Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW

... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...

Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in

... direct priming for medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 b Max Rec'd Cycles / Minute - 90 Displacement Per Cycle - 120cc Air consumption @ 6 bar - 280 Nlpm SPECIFICATIONS: Lower ...

Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in

... : direct priming for medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 B Max Rec’d Cycles / Minute - 90 Displacement Per Cycle - 120 cc Air consumption @ 6 bar - 280 N.l.p.m. SPECIFICHE: Lower ...

Flow: 27 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in

... application: direct priming for medium viscosity products use: transfer PERFORMANCE: Ratio - 2:1 b Max Rec'd Cycles / Minute - 70 Displacement Per Cycle - 450 cc Air consumption @ 6 bar - 950 Nlpm SPECIFICATIONS: Lower ...

Flow: 4.5 l/min
Pressure: 130,000 Pa
Input diameter: 4.9, 2.8 mm

Mini Diaphragm Vaccum Pump TM30B-H Motor Type:Brushless DC motor Max flow rate:4.5L/min Max pressure:130Kpa, Max vacuum: 65Kpa Voltage:6V/12V /24V Ideal Life Time:10000 Hours Working Mode:Continuous ...

Flow: 0 l/min - 3 l/min
Head: 6 m
Weight: 900 g

Mini Diaphragm Liquid Pump TF51-C Motor Type:Brushless DC motor Max flow rate:3L/Min Water lift:6M Voltage:12V 24V Ideal Life Time:10000 Hours Functions:Can dry-running, Self-priming ■ ...

Flow: 0.35, 4.5 l/min
Pressure: 0 Pa - 60,000 Pa
Head: 10 m

TF30B-H Micro Diaphragm Liquid Pump Motor Type:Brushless DC motor Max flow rate:water:0.35L/Min, gas:4.5L/Min Water lift:≥10M , Max vacuum: 60Kpa Voltage:12V/24V Ideal Life Time:10000 Hours Pump ...

Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm

LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...

Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C

ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...

Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...

Flow: 450 l/min
Pressure: 8 bar
Head: 70 m

The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...

Flow: 56 l/min
Power: 220 W

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose ...

Flow: 40 l/min

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional ...

Flow: 50 l/min

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose ...

Flow: 25 l/min
Pressure: 8 bar
Weight: 10 kg

... No problem! The WIWA INJECT ND 1 is an pneumatically operated diaphragm pump for low-pressure applications and is particularly suitable for processing suspensions. The self-priming device is flexibly ...

Pressure: 32, 16, 48, 24 bar
Weight: 7.2, 8.1 kg

Robust Reliable Suitable for different container sizes With our pneumatically driven piston pumps for transferring oil, you always have a reliable partner on hand. The robust 40 and 82 series have a 2'' bung fitting ...

Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm

CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical ...

Flow: 0.1 l/min - 10 l/min
Pressure: 0.1 bar - 5 bar
Head: 17 mm - 40 mm

Custom Design and Manufacture Vacuum Gas Liquid and Brushless Miniature Pumps With Compact Size and Light Weight.

Flow: 0.3 l/min
Pressure: 3, 4 bar
Head: 30 mm

CMP30L,micro water pump,mini membrane pump,liquid micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow ...

Crank pump for AdBlue® / DEF / ARLA 32 Order-number: 10517 Details Crank pump for AdBlue® / DEF / ARLA 32, antl-freeze, water -solid construction for professional operation -housing in stainless ...

Flow: 70 l/min

... The standard containers are primed and painted. We offer a 10-year warranty against rusting thro Electric pump CUBE 70 MC50 - self-priming - pump flow rate approx. 70 l/min - electronic ...