Lovejoy couplings

Torque: 100 Nm - 150,000 Nm

Universal Joint Shaft Couplings Fits standard DIN UJ (Universal Joint) companion flanges. Release torque is adjustable by Wedgepin ratings. The maximum release torque is based on maximum Wedgepin ...

Torque: 2,030 Nm - 26,155 Nm

Universal Joint Shaft Couplings Quick manual shearpin reset with Wedgegard® system Fits standard SAE UJ (Universal Joint) companion flanges. Release torque is adjustable by Wedgepin ratings. The ...

Torque: 600 Nm - 76,403 Nm

Type CFS Wedgegard couplings combine a Centaflex half coupling with the Wedgegard torque limiter. Units can be supplied bored and keywayed to customer re- quirements. CFS Couplings ...

Torque: 48 Nm - 36,450 Nm
Rotational speed: 1,500 rpm - 7,000 rpm

Hub-hub couplings with rubber elements for shaft-shaft coupling of both driving and driven machines by means of taper bushes already machined with cylindrical bore and keyway. Compared to the GC series, ...

Torque: 48 Nm - 36,450 Nm
Rotational speed: 1,500 rpm - 7,000 rpm

Couplings with rubber elements to couple the flywheels of endothermic engines with the shafts of driven machines by means of a flange-hub connection with a taper bush already machined with a cylindrical bore and keyway. ...

Torque: 48 Nm - 36,450 Nm
Rotational speed: 1,500 rpm - 7,000 rpm

Hub-hub couplings with rubber elements to couple both driving and driven machines with shaft ends.

Set collars with universal applicability, e.g. as a fixed stop. Set collars with strong clamping force. Material Screw steel stainless steel Set collar Steel, black, steam oxidized Stainless steel 1.4404

Clamping rings are provided with a fastening possibility for sensors, switches etc. Universal applicability, e.g. as a limit switch on a piston rod. Clamping ring made of stainless steel with strong clamping force. Material Screw ...

Quick plug coupling with radial offset compensation for multiple applications, e.g. as a link between a piston rod and a linear movement unit. Material Claw Heat-treated steel, tempered, phosphated Coupling ...

Torque: 0 Nm - 3 Nm
Rotational speed: 0 rpm - 6,000 rpm

... torsion resistant and failsafe Extended lifetime of encoders Description The corrosion-resistant HKS metal multiple disc couplings compensate for an angular misalignment of up to 0.5° and an axial ...

Torque: 5 Nm
Rotational speed: 10,000 rpm

... corrosion-resistant HK metal multiple disc couplings compensate for an angular misalignment of up to 0.5° and an axial misalignment of up to ±1 mm, thus extending the service life of encoders. The single-jointed ...

Torque: 0 Nm - 3 Nm
Rotational speed: 0 rpm - 6,000 rpm

... lifetime of encoders Options: isolated version, Ex-proof version Description The corrosion-resistant HKDS metal multiple disc couplings compensate for a parallel misalignment of up to 0.5° and an ...

Torque: 1 Nm - 25,000 Nm

... high-performance standard magnetic coupling series between 1-1,200 Nm, as well as customer-specific solutions from 0.1 -25,000 Nm. With various magnetic configurations, we can respond in detail to all customer requirements. ...

Torque: 1 Nm - 1,500 Nm

... combination with all common pumps and drive motors. A conversion kit converts a pump with mechanical seal and standard spider coupling, for example in a PU machine, into a hermetically sealed system. The conversion ...

Torque: 0.3 Nm - 150 Nm

... drives are available as overhead drive or bottom mounted drive. An agitator drive equipped with DST permanent magnetic coupling hermetically seals the agitator, thus preventing any escape of hazardous gases or the ...

Torque: 1.1 Nm - 65 Nm
Rotational speed: 9,000 rad.min-1 - 42,000 rad.min-1

... equipment / Mount machines / Medical / Machine tools / Packaging machines ● Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service -Cleanroom ...

Torque: 1.1 Nm - 35 Nm

... Actuator / Surface-mount machine / High precision XY stage / Index table Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service Please ...

Torque: 0.6 Nm - 200 Nm
Rotational speed: 6,000 rpm - 42,000 rpm

... for 1/10 taper shaft & clamping type) XHS-C (short, clamping type) Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service Application Actuator ...

... Two types are available: solid-hub couplings, designed to be remanufactured to customer specifications -Couplings associated with removable hubs making installation very easy. Conditions of use ...

Torque: 10 Nm - 975 Nm

These elastomer star couplings are used on servo shafts to overcome critical vibrations and when all-steel couplings reach their limits. They transmit torque without backlash and compensate for misalignment. ACPG ...

Torque: 11.5 Nm - 420 Nm

Curved-tooth couplings function as flexible connections. They are particularly suitable for transmitting high torques. They compensate for axial, radial and angular misalignments of the shafts to be connected. Gear couplings ...

... shaft is not serrated, as this would add little torque to the coupling and the increasingly narrow teeth would not be practical for cutting. The coupling of the Toothed Discs – Hirth Coupling ...

Torque: 3.6 Nm - 2,380 Nm
Rotational speed: 2,100 rpm - 10,000 rpm

The Nil-Union elastic coupling model 1 is very suitable at the entrance and exit of gearboxes, for machines or heavy-duty devices and also for machines with frequent stops and starts under full load or with alignment ...

Torque: 1.5 Nm - 237 Nm
Rotational speed: 3,500 rpm - 12,000 rpm

The Nil-Union elastic coupling models O and L differ in the length of the crown. The L model has the longest crown, and is especially suitable for use between any receiving machine and an electric motor with alignment ...

Torque: 380 Nm

Couplings G-GM Series: G series: max 1250 Nm GM series: max 380 Nm

Torque: 1 Nm - 15 Nm

• low-cost version with set screws • plug in - radial shaft displacement up to 3 mm • Torque range: 1 - 15 Nm • Shaft diameter: 3 - 19 mm • Temperature range -20 to +100°C

Torque: 1 Nm - 15 Nm

• standard series with radial clamping hub • plug in - radial shaft displacement up to 3 mm • Torque range: 1 - 15 Nm • Shaft diameter: 3 - 19 mm • Temperature range -20 to +100°C

Torque: 0.7 Nm - 12.5 Nm

• low-cost version with set-screw • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14 mm • Temperature range -20 to +70°C

• Under initial tension no backlash shaft connection • Triple axially pluggable version • Simple blind mounting, no time-consuming screwings • Small structural dimensions – low flywheel effects • Maintenance free, simple optical ...

SOFTEX® FA COUPLINGS The torsionally flexible Softex® couplings are maintenance-free and have good dynamic properties. The drive couplings are also available as Softex® FA flange couplings, ...

... applications in the mechanical engineering • Friction-locked, detachable shafts / hub connections • Coupling combination TL 1/1; TL 2/2 and TL 1/2 possible • Coupling hubs TL 2 axially separable • ...

Torque: 0 Nm - 21,000 Nm
Rotational speed: 600 rpm - 4,000 rpm

HYDRAULIC COUPLING FOR ELECTRIC ENGINES – STARTER The TRANSFLUID coupling (K series) is a constant filling type comprising of three main elements: Driving impeller (pump) mounted on the input ...

Rotational speed: 0 rpm - 4,500 rpm

HYDRAULIC COUPLING FOR DIESEL ENGINES – STARTER The KFBD series Constant Fluid Couplings are used on all industrial equipment driven by internal combustion engines up to 500 kW. By transmitting power ...

Rotational speed: 1,000 rpm - 1,800 rpm

... driven machine. The coupling can work using both oil and treated water as standard. KX SERIES HYDRAULIC COUPLING: OPERATING CONDITIONS The fluid quantity in the working circuit is less than in traditional ...

Torque: 0.05 Nm - 10 Nm
Rotational speed: 0 rpm - 15,000 rpm

Miniature Metal Bellows Coupling with set screws  • Backlash-free miniature metal bellows coupling with radial set screws  • For shaft diameters from 1 – 24 mm  • High torsional stiffness, ...

Torque: 0.1 Nm - 10 Nm
Rotational speed: 0 rpm - 15,000 rpm

... Perfect bellows coupling for encoders, tachometers, potentiometers, servo drives, NC axis, stepper motors  • Torque range: 0,1 – 10Nm Miniature Metal Bellows Coupling with split hubs  • Backlash-free ...

Torque: 18 Nm - 1,400 Nm

Metal Bellows Coupling with collet clamps  • Backlash-free metal bellows coupling with clamp hubs  • Hub material: up to 60Nm – aluminum, up from 80Nm - steel  • For shaft diameters from ...