Maag pumps

Pressure: 8 bar
Head: 100 m
Power: 0.37, 0.55 kW

M110 is chemical pump to liquid additives for wet concrete. It can be transfer to 100 meters and can use different chemical additives

Pressure: 200 bar

Ideal tool to pierce shocks absorbers, to aspirate the oils inside and to make flow them into the tanks. Functioning completely oil-dynamic. Max pressure: 200bar.

Flow: 130, 160 l/min

Alternative plunger piston pump with two bodies, both for fluid cement or one for fluid cement and the other for water, both at very high pressure Main characteristics: - Drive power diesel an high press. Hydraulic ...

Flow: 6 l/min
Pressure: 250 bar
Power: 2.2 kW

HYDROPRO 600 is configured for large paint jobs. Due to its important and continuous product flow-rate, it guarantees a great productivity. Its suction rod allows to work directly from a paint bucket. Its small size and folding arm make ...

The pump is used for pumping liquid products such as defoamers. The pump is equipped with a special seal of Viton, which is chemically resistant to these chemicals. The pump is supplied ...

Pressure: 0 mbar - 666 mbar

Precise aspiration pump for follicular puncture Advantages of Aspirator 3: • Approved medical device • Easy handling by electrical pedal • Long durability • High reliability • Very silent • Constant control of ...

Flow: 50 m³/h - 8,000 m³/h
Head: 30 m - 1,000 m
Power: 30 kW - 3,000 kW

... -M series: submersible pump unit with the motor above the pump and suction intake at the very bottom. The water will be pumped to the surface with several more hydraulic and technical advantages comparing ...

Flow: 5 l/min - 25 l/min
Power: 40 W
Output diameter: 795 mm

The fully automatic ink pump FP 3 wasdeveloped for 1-component inks.The integrated viscosity measuring device forwards the computed datacontinuously to the electronic control of the device. With the help of a electrovalveguided ...

... of “DIRECT DRIVE” waterjet pumps is recommended for use in applications where the flow rate rather than the actual cutting pressure is most important, especially with low pressure multiple-head applications. This type ...

Air pressure pump is a new type of transport machinery, is a new type of pump at home. With compressed air as the power source, ail kinds of corrosive liquid, liquid containing particles, high viscosity, ...

Flow: 0 l/min - 2.28 l/min
Length: 212 mm
Width: 135 mm

Peristaltic pump with continuous transfer and dispensing function. LCD touch screen and 4 smart modes; transfer, timing, quantitative, and quantitative/transfer mode. Low consumption and low noise motor. It includes accessories ...

Flow: 2, 3, 4, 5 m³/h
Head: 43 m - 198 m
Power: 750 W - 5,500 W

Product features： Thermal protector：single phase Insulation：F Protection：IP55 Working conditions： Medium temperature： low temperature:-20~+70℃ standard model:+15~+70℃ high temperature:+70~+104℃ Environmental temperature：≤50℃

... centre-in-shell) they are listed below. - You will require a full tray pump to make a centre filled article (centre-in-shell). - You will require a stationary pump. - You must lift the ...

Flow: 11 l/min
Pressure: 825 bar
Power: 0.37 kW

... self-priming electrig gear-wheel pumps EP are designed to transfer and dispense oil. An integrated bypass-valve limits the max. oil pressure. The pumps feature a protected switch and must be shut off ...

Flow: 0.00008 l/min - 1,000 l/min
Fluid temperature: 0 °C - 40 °C
Length: 180 mm

Compact Peristaltic Pump MCPP-1A is a positive displacement pump with a digital knob to control speed. It pumps out fluids with flow rates based on model type and tubing ...

Flow: 1.9 l/min - 7.6 l/min
Pressure: 0 psi - 30,000 psi

... required to drive the pump. Standard pump models use 100 psi of supply air pressure and can be configured for maximum output pressure of 10,000 psi (689 bar), 20,000 psi (1,379 bar) or 30,000 psi (2,068 ...

Heavy Duty Drum Auto Pump Heavy duty trade quality Safe with more agressive chemicals Siphon type For 205 litre drums All polythene will not rust Adapter available as shown at the bottom of this page.

Pressure: 0 bar - 2.5 bar
Power: 12 W

Classification:Solenoid pump Click:64 Date:2019/07/02 Orifice Pressure 0Bar Connection size (Entrance）Φ6、（Exit）G1/8