Mass flow valves

DN: 0.25, 0.125 in

Made of extruded brass (CLA-360) and forged brass (CLA-377). Ideal for compressed air, oil, water and vacuum systems. Allows the control of ideal flow according to the requirement of the system.

DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 70 °C

Throttle valve, in block shape, Anodised aluminium, Straight-way valves with restricted flow in both directions.

DN: 27 mm
Pressure: 400,000 Pa - 600,000 Pa
Temperature: -25 °C - 85 °C

Abstract： Electromagnetic pulse valve modelDCF-ZM-20Connecting the vent tube outer diameter（mm）Φ27size（mm）A67B45C26D26E162F1 technical standard Working pressure: 0.4~0.6MPa Working medium: clean air ...

Vatac Three piece Bolted Body Ball Valves are available both in Forged and Investment Castings. In Straight through two ports or Multi-ports structures. Designed and manufactured to the most updated international standards ...

DN: 2 in - 72 in

Valves, Gaskets, Screws Pipes (seamless and welded) - Heat Exchanger Tubes - Elbows - Reducers - Tees - Flanges - Bends - Special items as per drawing - Valves and Actuators - Any other Piping ...

DN: 50 mm - 1,000 mm

... Segment Ball Valve is a high performance valve we have developed with advanced technology.It also called eccentric ball valve ,semi ball valve ,half ball valve ...

DN: 15 mm - 65 mm
Pressure: 6 bar - 8 bar
Temperature: -15 °C - 225 °C

Body in microcast stainless steel CF8M/316 Actuator in stainless steel AISI 304 Normally-closed, normally-open, double-effect function Seal in modified PTFE or PEEK Packing in PTFE and FPM Guided shaft for stable axial movement Self-centering ...

Pressure: 2,500 psi
Temperature: 0 °C - 320 °C

The Pressurizing Valve is designed to be used with Pressurized Aging Cells. 316 stainless steel pressure valve, certified for 2500 psi (17,237 kPa)

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior ...

DN: 80 mm
Pressure: 10 bar
Temperature: 60 °C

UPVC Ball Valve with Pneumatic Actuator Valve Standard: DIN, ANSI, etc.

DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C

... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...

... position seats are protected from the medium robust and simple design zero leakage valve top entry design (work on a valve can be done with valve still installed) ...

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 50 mm - 1,200 mm

Kolk gate valves are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 1074-2 (DIN 3352-4) and EN 1171, flange drilling acc. to EN 1092-2 (ISO 7005-2). Face to face acc. to EN 558-1 (DIN 3202-1 ...

DN: 2 cm - 3.5 cm

• Lower permeability and pressure loss compared to elastomer valves • High system safety and chemical resistance • Maximum residual drainage and reusability due to better gas tightness • Long and position-independent ...

IVEK’s Ceramic Liquid Valves offer a durable high-performance alternative to “plug valves” commonly used in instrumentation Traditional polymer valves have a limited life due to material ...

DN: 65 mm

The water stop valve is used to stop water of fire hose, controlled by ball valve, easy to operate with its strong practicality, light weight. It can block the water flow quicky when the fire hose bursts, ...

DN: 1, 2 in
Pressure: 2,500 psi
Temperature: 260 °C

... service time, thanks to top entry design and easy-to-service-seat Design offers choice of angle and globe valves Standardised 1" and 2" valves with variable trim options Choice of materials for body, ...

Pressure: 140 MPa

... sériés of globe valves are mainly composed of valve body, valve core, adjusting rod, handwheel, etc. The valve body is made of steel forging, with nickel plating on the ...

DN: 1 in - 4 in
Pressure: 10,000 psi - 20,000 psi
Temperature: -29 °C - 121 °C

Plug Valve is an important high pressure part for well service to allow and stop flow by plug rotation. Jereh plug valves are made from premium alloy steel, with special coating and heat treating ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C

Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...

DC24V Al-Alloy Material on-off electric butterfly Valve, electric actuator with Ce/CSA/RoHS Certificate Features: Name: On-off Electric Butterfly Valve Standard Time/Torque: 20S/50Nm Motor Power: ...

Pressure: 24.5, 245 bar

... Clamptek CSV hydrulic sequence valve is designed to provide reliable and exceedingly efficient performances. The masterful design has been patented and its high quality is endorsed by its loyal and expanding customer ...

PTFE high vacuum valve The properties of high vacuum and PTFE rubber O-rings at the top could arrive at the perfect effect of high vacuum and corrosion resistance. PTFE high vacuum rod with PTFE rubber O-ring YZ0501 ...