... 1603 , maximum temp 1000C, quarts tube, rotameter for N2 gas flow adjustment, sliding sample carrier, alumina sample boat, digital temperature and time control, glass ware and chemicals according to the standard including ...
According to standard ASTM D 1321 Digital timer Digital display of needed movement Needle and sample cup as per standard Water bath temperature up to 80C Trainign video included
State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and ...
SmartVision S.r.l.
Automatic Uniformity Tester according to ISO 12312-1, GB 39552.1, ANSI Z80.3, ISO 16321-1, EN 174 & ISO 18527-1 Easy_Tester_Pro is the Worldwide Optical Market Standard Device that performs a complete ...
SmartVision S.r.l.
Polarization Axis Tester for Optical Industry According to International Standard ISO 12312-1 Smart_Polar checks the Polarized Filters for SunGlasses, Masks and SkiGoggles in accordance to International Standards Automatic ...
SmartVision S.r.l.
The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems ...
AEMC Instruments
... Features AC/DC voltage output 12 - 690V Digital LCD display Audible continuity Single pole detection Phase rotation sequencing LED torch light GS38 shrouded test probes Box Contents KANE-VCT Voltage ...
... DC Continuity measurement with I > 200 mA Comfortable measurement due to the timer / Data Hold / voltage presence LED functions Safety: 600 V, Cat. III (IEC 611010-1)
MULTIMETRIX
500VA AC Test Capacity 240x64 Ice Blue Dot matrix LCD Sweep Function for DUT characteristic analysis Insulation resistance measurement up to 50GΩ(GPT-9903/9904) Manual/Auto Mode Function Key for quick selection ...
... strong and rugged tool which can be operated in the field by any personnel, expert or not. Digital Optical Oil Tester: The GESERCO Rapid Optical Oil Tester has a last generation infra-red ...
... increase or decrease the signal. There are 7 set-points, 0%, 10%, 25%, 50%, 75%, 90%, 100%. Each is indicated on a high brightness LED and an audible beep sounds as you step between them. Auto-stepping mode (adjustable ...
The 7007 LoopMate 2 is a dedicated loop signal indicator (RxSim) with an in-built 24 V loop drive supply (TxTest). The operator can select the loop type, and also the type of units, either direct (mA) or % of span display. The loop signal ...
Product Description CST-501 cutter sharpness tester is specialized equipment ,which is used to test cutter sharpness. Adopt cutting medical silicone rubber method to measure cutter sharpness. It is composed of intelligent ...
The pipe opacity tester can be used to determine the impermeability determination of plastic pipes and fittings (showing results as a percentage). The instrument is controlled by an industrial touch screen and operated ...
... breaker. The internal buzzer can be muted from the Raptor’s console. APPLICATIONS CT, VT and PT withstand voltage tests CT and VT excitation current measurement. VT and PT ratio measurement. Polarity ...
... test chambers water vapor permeability analyzer using infrared sensor is the highest accurate water vapor transmission rate tester, meeting standard of ASTM F1249. 1) Plastic film, composite film, aluminum foil, aluminized ...
Guangzhou Biaoji Packaging Equipment Co., Ltd
Water Vapor Permeability Tester Electrolytic Sensor Method W203 Watef Vapor Permeability Tester Wholly automatic, software easy to use. Curves of transmission rate, water vapor density, humidity and ...
Guangzhou Biaoji Packaging Equipment Co., Ltd
GBD-L Falling Dart Impact Tester Test Plastic Film Sheet Flexible Package gbo-l Falling Dart impact Tester test the impact résistance of various films, metallic foil and so on. widely used in industries ...
Guangzhou Biaoji Packaging Equipment Co., Ltd
Large Current Battery Short Circuit Test Device Relevant standards requirement: 1. Test object: battery pack and system 2. Test conditions: • Test temperature should be at the 20±10℃or higher. (According to battery system manufacturer’s ...
Battery Short Circuit Test Machine Relevant standard requirement Single Storage Cell Safety Test 6.2.4 Short circuit 1. Charge the single storage cellaccording to 6.1.3 standard 2. The cellis to be short-circuited by connecting ...
The HST-H6 is a heat seal analyzer developed by Labthink. It is built based on the heat sealing method and with accordance to ASTM F2029, QB/T 2358(ZBY 28004), and YBB 00122003 standards. The unit is mainly used for films with smooth ...
Test Applications -- Adhesive and Label Testing, Film and Foil Testing, Food Testing, Medical Product Testing, Package Testing, Paper and Tissue Testing, Plastic Testing, Seal and Tape Testing, Textile and Non-Wovens Testing Test ...
Applications -- Films and Foils Testing, Paper and paperboard testing, Textile and non-woven fabrics testing, Metal Sheet testing, Food packaging Testing Test Property -- Thickness Test Method -- Table Type Contacting method ...
Digital voltage and continuity tester with bar graph and numerical measured value display Description: – Voltage tester with the most commonly used nominal voltages ...
The EMF-701A is a magnetic field tester manufactured by TECPEL®. This device is used for fast, dependable, and simple measurement of electromagnetic field radiation levels around home appliances, industrial equipment ...
Simulating Transport Vibration Tester is based on the United States and European transport standards,and with reference to the United States of similar equipment to improve manufacturing. The use of eccentric bearings ...
... 1. The main axle of tester used dual axle rode, high precision and good stability. Power failure safety design, it will be kept the original condition under power cut and the swing arm will not break away unusually. 2. ...
The MW9325 is an advanced installation tester designed for comprehensive checks on outlet wiring and various electrical installation measurements. It serves as a TRMS multimeter, socket tester, and more, ...
SEFRAM INSTRUMENTS
... the contact pressure tester simulates the movement of the contact through the digital force gauge and force measuring head, and measures the pressure between the contact and the stationary contact. The ...
Easily check all ground connections, protective conductors and equipotential bonds, and ensure that the measured resistance is less than 2 Ohms, in compliance with NF C 15-100. Rated voltage : 600 V~ CAT III / 300 V~ CAT IV More info ...
ELECTRO PJP
... diagnostics unit enables a straightforward condition assessment of the cable system. The new HVA68TD is more than just a VLF tester. In addition to VLF testing & Tan Delta diagnostics capability, it allows to pre-locate ...
... 100 is very easy to use for all employees of a research / production site. The test results are given through lights, digital indicator and buzzer, which can be programmed by the user. 4 thresholds are available: ...
EASYLAN is a powerful LAN tester for certification of copper cables, optical cables and networks up to 30 MHz. It stores up to 1,700 tests managed by sites and enables users to issue comprehensive certification reports ...
Two-pole voltage testers, such as the PeakTech 1090, are ideal for quick and uncomplicated voltage measurements. This model is TÜV / GS tested for special user safety and has an easy-to-read LCD display with backlight ...
Peaktech
Voltage and continuity tester with phase sequence indication The Beha-Amprobe 2100-Alpha, 2100-Beta and 2100-Gamma are rugged and reliable two pole voltage testers for voltage and continuity checks. ...
BEHA AMPROBE
... Interface Digital, analogue output Line voltage 230 V +/−10%; 49 … 61 Hz Form factor 3 RU • 36 HP Weight 2.8 kg Expansion modules Interfaces Other interfaces on request 90-4K E10 Ethernet ...
ELABO
Please specify:
Help us improve:
remaining